Over an extended period of time there have been plans to establish a shared facility in Lennheden to extract groundwater from the Badelunda esker to provide drinking water for the cities of Borlänge and Falun. The city of Falun is dissatisfied with the quality of its drinking water and the city of Borlänge is concerned about the risk of contamination of its existing groundwater supply at its current location. To provide a basis for a decision on this issue, the company Midvatten AB has been commissioned to perform hydrogeological investigations in the area of Lennheden.The purpose of this thesis is to design a functional groundwater model of the area between Lennheden, place of planned extraction, and Övre Tjärna, place of existing extraction, to get a better understanding of the groundwater situation in the area. A groundwater model enables simulations of different scenarios in risk assessment and contaminant transport. The aim of the thesis is that the model can be used as an aid in Midvatten?s investigations in Lennheden and that it also can be used in future projects in the area.The model has been made in Processing Modflow 5.3 and encompasses an area of 19,5 × 11 km along the Badelunda esker and the river Dalälven between Djurmo and Frostbrunnsdalen.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

The aim of this study was to investigate preschool teacher?s perceptions about the curriculum goal concerning simple chemical processes. The result was based on narratives received by a qualitative study and semi-structured interviews of six preschool teachers. The results of the study showed that preschool teachers perceive that they actually are working in a relatively small scale with simple chemical processes and they do not really know what simple chemical processes are, and do not feel very familiar with the subject. Water, dough, mud, paint and baking were the most common activities that were used when working towards the curricular goal. However, it was never explained to the children that it was simple chemical processes they were working with during the activities, neither was it discussed among colleagues because of the uncertainty about the concept.

This paper examines the opportunities and challenges of integrating conservation practice and the circular economy into practical planning processes. In recent years, the discussion of circular economy and its relevance in the sustainability debate has intensified. According to the Swedish Environmental Protection Agency, the transition to a circular economy is crucial to achieving the national and international environmental and climate goals as well as the global goals in Agenda 2030. Parallel to this, there is a long established heritage discourse that emphasizes the importance of preserving buildings and cultural environments as part of our cultural heritage. These two discourses have common goals, but they differ in how they present their respective arguments.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

This master thesis was performed at Scania Research & Development. The given mission was to see where the department Systems Development should focus to improve their development work. Thus the purpose was to map the product development processes in which the department works today and within them identify improvements. To fulfil the purpose a theoretical study of relevant terms, such as improvement work, product development and processes, initially was formed. The mapping method used is called "walk trough" and meant to let the people working in the processes be guides in their own process.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

Purpose: This study deals with warehouse management with an emphasis on vertical lift modules (VLM). The aim is to examine the effect of the implementation of VLM on a business's warehouse management. In order to obtain a result, the study has been based on the following questions:? How was the warehouse management designed before the implementation of VLM?? How is warehouse management designed after the implementation of VLM?Method: To be able to answer these questions, interviews with ten users of VLM performed. All users usually lift systems from the same manufacturer.

Understory vegetation and fungi are regarded as important ecological drivers of processes like productivity and nutrient cycling in boreal forests. Whilst those processes are linked to soil water content, relatively little is known about the sources of soil water for these forest components. During early autumn in boreal forests, temperature falls and large events of rain are frequent which may influence soil water availability. To better understand the autumn plant-soil-fungi water relationships in this ecosystem, I used stable isotopes techniques in this study to examine the water sources for ericaceous shrubs and fungi in a Scots pine forest following a large, early autumn rain event. I hypothesize that ericaceous shrubs of two functional groups (evergreen vs.

Studies show that the interest and knowledge about science among teenagers is decreasing. They also reveal the difficulties to explain the ecological processes and that the ideas about the nature are collected from everyday life and early school years.The intention of this investigation was to find out more about children?s ideas and knowledge about the ecological processes and to compare these results with the curriculum.The method was a questionnaire and interviews with children in school year 1 ? 6. The aim of the studies was also to find out if any progress connected to age could be found, concerning understanding of the ecological processes.The results showed difficulties in achieving the predestined goals for biology and chemistry concerning ecology cycles and they differed a lot between the children. Often the learning process showed very little progress.

This thesis aims at studying representatives from three groups in the Egyptian society with an ethnographic method and with regards to their experiences, reflections and stories of the Egyptian revolution. The material of the thesis is based on ethnographic fieldwork and on interviews.The purpose of the study is to explore different themes in the informants? stories related to society, freedom, social justice, human values, peace and civility. The purpose is also to examine the informants' stories with emphasis on various informal learning processes that occurred in the Egyptian social change.The study finds that according to the informants a society should be characterized, among other things, by human values, social justice, non-violence and peaceful methods and approaches. Various informal learning processes involving both individual citizens and active members of civil society and NGO groups were found to be practiced to be able to accomplish these changes in the Egyptian society to create a better future.The degrees of involvement of the various learning processes not only reflect differences between informants regarding the social and cultural background.

Law firms are defined as knowledge-intensive companies. Due to the dependency regarding the resource of knowledge among the firms employees and to the fact that they often are categorised as a type of professional service firm. The purpose of this study is to investigate the different types of profitsharingsystems as a form of reward with focus on the theoretical differences and effects of the True Partnershipmodel and the Stockholmmodel. In addition to these models we will look into the Human Resource processes of; recruiting, integration, retaining and development of employees. The main purpose of the study is to examine the theoretical level on how the profitsharingsystems effect different Human Resource processes and through the knowledge of these connections using this as an analogy when to analyse other law-firms and knowledge?intensive company?s.

The purpose of this thesis is to examine and analyse which effects a service strategy has on the control system of an organisation. The thesis takes a service perspective, and it is assumed that a service strategy gains competitive advantage and that the goal of the service strategy is to increase the customers? satisfaction level. A qualitative in-depth case study was performed on a Swedish beauty company. The organisation?s vertical structure was examined, from central to local level.

Self-compacting concrete has soon been around for a decade. Recently the prefabrication industry has started to use this fairly new concrete type in larger scales, mainly because of its distinctive properties.  There are still certain areas that need to be thoroughly examined, such as bond capacity. There have been very few studies regarding shear capacity due to the fact that the procedure is complicated.This report will highlight a method to examine the shear capacity of different surfaces that have been prewetted as well as non-prewetted surfaces. The surface areas follow BBK 04?s and Eurocode 2?s demand for surface roughness.  A smooth surface will be completed in order to confirm if the different shapes influence the bond strength by shear stress or not.                       The purpose of this essay is to measure the bond strength within the shear capacity as well as examine the impact it has on surface roughness and treatment for shear bond.The method used to identify the shear capacity is called L-shaped Push-Off Test.

This report describes and explains the development of a comprehensive solution including visual identity, print catalog, website and online shop for the furniture company Resize Design. The development and production of these have occurred in the iterative processes with relevant theories as a basis. The theories include user-centered work processes, usability, design principles, interaction design, design patterns and web-compatible solutions. The report documents and discusses the work which is divided into different phases. .