This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

This thesis was made possible by the company Verendus system AB, which is the leading developer of dealership management systems in the caravan and camper market. The goal of the thesis was to create a statistics module for a new producer system envisioned by Verendus. The new system is aimed at manufacturers and importers of caravans and campers, with the goal of enabling its users to create more effective production lines. By providing statistical data to mentioned users they will be able to predict market trends and customize their production lines accordingly. Today such software does not exist which leads Verendus to think that its arrival would lead to a success on the market.Before the development and design of the producer system began, a new agile method had to be developed, MAM (Minimum Agile Method).

Envirotainer builds containers that are specialized in transporting of temperaturesensitive products these containers are customized for airplanes. The containers arethen leased to other companies, most often to pharmaceutical companies.Envirotainer are based in Lagga, Knivsta. It is also here where the production of thecontainers is held. The container RAP T2 was designed in the early 80ies. The RAPT2 contains a fleet of about 1220 containers spread all over the world.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

This rapport handles the presence of two kinds of watermills in the Swedish landscape. The first is a small type with a horizontal shovel blade and the other a bigger kind with a vertical standing shovel scoop. The rapport seeks for information of their capacity and how long they existed as flour producing units. A important issue is how small can a brook be and still run a mill. Finally the reasons for their disappearance in one selected parish is shown..

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

The aim of this bachelor-thesis is to study how postgraduates approach open access during times of change within scholarly communication. Our theoretical framework is based upon Knorr Cetinas epistemic cultures and Cullen & Chawners theory that there is a paradigmatic conflict within scholarly communication due to the fact that open access has failed to reach the same level of prominence among researchers as it has within research libraries. We interviewed six postgraduates at Malmö högskola in order to find answers to our research questions. We identified a shared epistemic culture among the postgraduates, which can be explained by the fact that being postgraduates, they all share similar experiences and values. We chose to call this epistemic culture the horizontal epistemic culture.

This Master?s Thesis is an evaluation of the software Xilinx System Generator (XSG) and blockset for Matlab. XSG is a module to simulink developed by Xilinx in order to generate VHDL code directly from functions implemented in Matlab. The evaluation was made at Saab Avionics AB in Järfälla, north of Stockholm. In order to investigate the performance of this new module XSG to simulink, a model of a frequency estimator often used in digital radar receivers were implemented in Matlab using XSG.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

Riksteatern is a Swedish movement which was formed during the 1930s. The movement now consists of 230 local societies and had 545 000 visitors last year. The purpose of this thesis is to investigate how a movement, mainly financed by the Swedish government, is run. To be able to understand this, the theories of Pierre Bourdieu are used together with organizational theories. The empirics are collected mainly by semi-structured interviews made with employees at Riksteatern.

This paper deals with the subject internal communication. We received this assignment from Region Värmland, an organization formed jointly by the 16 municipalities in the county of Värmland, to take responsibility for regional development, growth issues, culture and adult education in Värmland. The organization consists of a number of geographically dispersed units with specialized working areas. In this type of organization, there are high demands on internal communication as a tool to coordinate the organization?s different units and integrate their work, in order to reach the common goals.

When a car owner want to lock or unlock his or her car today, it?s preferable done by using aremote control. The system is really comfortable when the car owner is using the remote.A problem arises if a thief gets the remote.The thief doesn?t have to know where the car is parked, an approximate estimation where thecar is parked is enough.For instance, it?s enough to know which car park the car is parked in. If the thief knows that,he/she can repeatedly activate the remote control while looking for a car indicating with lightsand sounds.Because of the fact that a car usually indicates that it has been unlocked by making a shortsound indication, there will be no problem finding the car.The purpose with this project is to make a prototype which makes it harder for a thief to findthe car.

This paper examines the film distribution and exhibition sector in Europe. The general analysis of these sectors? situation was made. Moreover, the comparative and more in depth analysis of three countries by the Porter?s five forces model was made; These were United Kingdom, France and Denmark.

The economic situation in the Swedish agricultural industry is currently experiencing a development towards larger units. This progress occurs simultaneously as farmers in cooperation more frequently make investments to decrease risk exposure and to improve the financial result. The purpose with this thesis is to study which advantages and problems a group of farmers experience after a common investment in a small-scale seed production. The aim with this investment is to increase the level of vertical integration in their respective agricultural firms and the results will be analyzed from an economic point of view. At present, the farmers are all seed producers with considerable cultivation areas.