Management control systems are a popular area of research and a lot of new research has been done over the past years. This development has been looking into new situations and circumstances, and interdisciplinary studies are being made to further understand the connection between different fields of study. A new field of study that has grown significantly over the past few years is the connection between management control systems and entrepreneurship. Leading researchers have proposed a number of questions for further research and one of them is the board of directors? use of management control systems in entrepreneurial firms.The purpose of this study was to examine the differences and similarities in the board of directors? use of management control systems between entrepreneurial and non-entrepreneurial firms.The study was conducted as a deductive qualitative study through interviews with respondents from entrepreneurial and non-entrepreneurial firms.

Examensarbetet som beskrivs i denna rapport handlar om byte av styrsystem i en CNC-svarv på företaget Precisionsdetaljer Mekatronik i Linköping. Ett Fanuc 5 styrsystem har ersatts av ett modernare Fanuc 21i-styrsystem. Rapporten beskriver det nya styrsystemet och redovisar hur arbetet med att praktiskt byta system har gått till. Arbetet indelades i tre delar, informationssökning, praktiskt arbete och dokumentation. Informationssökningen behövdes både för hopkoppling av de olika delarna och för parameter- och ladderprogrammering.

Background: Diversified companies, for example audit firms, sometimes offer different kinds of products and services. Different key success factors can in the same company thereby evolve. Goal congruence has to be achieved in the business divisions as well as in the company as a whole even though each business segment might have to focus on different factors. Purpose: The purpose is to analyze if differences in technology and culture between the business divisions in diversified companies motivate a differentiated reward system. Method: The study has a case study approach.

Examensarbetets syfte var att skapa ett generellt mät- och styrsystem som är möjligt att fjärrstyra över Internet. Systemet består av en kontrolldator och ett antal separata moduler, vilka var och en realiserar någon typ av mät- eller styrfunktion. Användningsområdet för ett sådant system är brett; det kan exempelvis användas inom automation av bostäder, för process-övervakning och styrning inom tillverkningsindustrin, eller inom under-hållningsbranschen.Eftersom ett fullt utbyggt system kan bestå av ett drygt 100-tal olika mo-duler, är det här examensarbetet av praktiska skäl begränsat till att rea-lisera en handfull av dessa. Då systemet är enkelt att skala upp, är den be-gränsningen i antalet realiserade moduler i prototypsystemet inget som påverkar de erhållna resultaten. Exempel på storheter som kan övervakas är temperatur, avstånd, lufttryck och ljusstyrka.

Transfer pricing including internal loans have increased in recent years, making it easier for companies to minimize their taxable income. After the Swedish court case Diligentia, there have been discussions regarding the influence of a parent company's transparency and control of the subsidiary with regards to the interest rates on internal loans. In court cases that followed Diligentia, the Swedish Tax Agency argued that a parent company always could be assumed to have sufficient transparency and control of the operations in the subsidiary, and therefore reduce the risk on their debt obligations. This thesis seeks to analyze the effects of the transparency and control a parent company has with regards to interest rates on internal loans. The analysis is conducted by analyzing court cases similar to Diligentia.

The purpose of this study was to increase the understanding of how patients following cerebral vascular attacks percieve personal Control and their ability to influence the course of their rehabilitation. Specific questions relating to the concept of Health Locus of Control such as perception of personal responsibility and own influences as well as the recognition of the influence of outside phenomena such as faith, luck and divine power were asked for. The empirical findings of this study were based upon semistrucutural interviews with five respondents. The results showed that the respondents efforts, together with the efforts of others were a necessity in successful rehabilitation. The influence of faith or luck on the other hand, was not percieved as a factor for success.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

Asymptotically flat spaces are widely studied because it is one natural way of describing an isolated system in general relativity. In this thesis we study what happens to the Lanczos potential at spacelike infinity in such spacetimes. By transformations of the Weyl-Lanczos equation, we derive expressions for the limiting equations on both the timelike unit hyperboloid, and the timelike unit cylinder. Finally the Newman-Penrose formalism is used to get a component version of the equations..

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

The purpose of this study was to investigate the relationship between Health Locus of Control, Exercise habits, Food habits and Self-esteem (Personal self and Physical self) between two groups of student teachers at a university in the south of Sweden. Is health such as exercise, eating and self-esteem something that is controlled by internal or external factors? Student teachers that participated in Physical and Health programme and student teachers that participeted in other programme were investigeted. The participants (N = 160) answered the questionnaire. The Health Locus of Control scale and Tennessee Self-Concept Scale were used.