In this project I have created a design for the delivery rooms of Swedish hospitals with the psychological aspects ofbirthgiving in focus. This is something that I think the delivery rooms lack and so far it has been the midwifes job to,without any tools, give the women in labor the mental support and encouragement they need.My goal was to give the midwifes a tool to work with when it comes to encouragement, something helping themhelping the woman to feel safe and relaxed, strengthened, informed and in control of the situation.I choose to focus on the difficulties measuring the physical work the woman in labour had done and what was leftof the labour. I wanted to visualize the process of the birth, allowing the woman to see and being able to focus onwhere during the labour she is, how far she has left and also being strengthened by the amount of work already managed.Further I wanted to make the woman feel invited to take control over the birth and the room in which she isin labour. I wanted her to be able ? if she wanted ? to make her own settings of the mood in the room, deciding forherself if she wanted a more relaxed environment or perhaps a more energetic.

Today?s society is one where technological advances are made daily, which increases the need to stop and assess the risks against users? integrity when integrating new technology in contemporary systems all the greater. We have taken two technologies, Near Field Communication and Certified Wireless USB, whose envisioned area of use is to be integrated into mobile phones, and evaluated what security threats are revealed for the respective technologies. The threats against security have been identified through research of the standards and existing reports for each technology. Practical experiments have not been conducted on account of us not having access to any equipment to run such trials.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

The park at Svaneholm is a place, the history of which is very little known today and the needfor better knowledge has been the cause of this investigation. The essay is primarily limited tothe time from late 17th century up to the end of the 18th century and takes stand on profoundinvestigations in accessible map-and archive material. The results presented show a manorhill, which during the course of a hundred years was subject to several changes and in bigparts consisted in other than park/garden.Burman related to the manor hill containing a cowshed, a large dam and a parterre garden isix quarters and it is plausible to think, that this establishment generally was built as producedon the plate.In the 18th century the construction is being changed, they go on building at the cowshed andin 1707 there are totally 268 livestock on the farm. In 1723 the garden is represented in amuch bigger scale than on the plate from the 1680:s, but it is not possible to tell, whether it isnew or not.Parts of the parterre garden is remaining during the whole of the 18th century, for the leastuntil it is being squared, but on two of the squares there was built a riding-groundMoreover the cowshed burnt down and was only partially reconstructed.The image given by the archive material is at the same time variegated. The inventory list ongarden tools from 1726 gives an image of gardening more directed to growing and pathshuffling, while the possibilities of keeping the parterres were fewer (e.g.

In the early 1990?s more and more companies of the Swedish public sector were exposed to competition, and this started the debate on how such actions might affect the business and even society.The first chapter examines how the public sector and especially health care, is financed and managed. We also explore what it means to be exposed to competition and find that there are many different ways of exposing the public sector to competition. The study examines dental care as an example of a market with both publicly and privately owned companies. The purpose of this paper is to explore how publicly and privately owned health care companies view their relationship with their consumers.

Large quantities of chemicals are used in all areas of society. The chemicals can be toxic and dangerous for the environment if used incorrectly. To protect people and the environment from dangerous chemicals, a good control of them and an active work to phase out hazardous substances in all areas where chemicals are present, are needed. Banverket and Vägverket handle in production a wide range of chemical products. Many of the products are dangerous to the environment, for those who work with them and to others who may come into contact with them.

This essay is about the hamlets´ older boundaries, i.e. boundary lines (?rågångar?) and boundary markers in the form of rocks, and an own survey of two hamlet boundaries in southeast Sweden. Many of the boundary rocks were subjected to unintentional damage or destruction that arose during forestry activities, the excavation of ditches, or road construction. Boundaries between hamlets sparsely populated areas were not clearly defined from the beginning, but were established initially in the form of boundary zones, that often consisted of wetlands, watercourses, or mountain heights.

Syfte: Syftet med denna systematiska ?versikt var att unders?ka medelhavskostens p?verkan p? grad av depression hos vuxna personer med depression. Metod: S?kningar utf?rdes i databaserna PubMed och Scopus under mars 2023. Inklusionskriterier var randomiserade kontrollerade studier, vuxna ?18 ?r med diagnostiserad depression enligt sj?lvskattningsformul?r eller medicinskt utl?tande. Utfallsm?ttet var grad av depressionssymtom m?tt med skalorna MADRS (Montgomery-?sberg Depression Rating Scale), BDI-II (Beck Depression Inventory II) eller DASS-21 (Depression Anxiety Stress Scale). Artiklar som inkluderat fler interventioner i sina studier ?n kostintervention eller artiklar som ej var skrivna p? engelska exkluderades. De studier som m?tte kriterierna inkluderades och kvalitetsgranskades enligt SBU:s (Statens beredning f?r medicinsk och social utv?rdering) granskningsmall ?Bed?mning av randomiserade studier ? effekt av att tilldelas intervention?.

This graduation thesis is about baths and beach like places in city centers. It focuses on recreation and the creation and development of public, social spaces in the city containing water as a visual and useable element. The thesis is divided into three parts; background, inspiration and application. The background examines four factors which we consider important for the occurrence of inner city baths; water, the history of bathing, inner city recreation and social life in public places. A discussion of the (future) importance of inner city baths and beach like places' is then presented. The inspirational part is divided into examples of existing places and examples of types of places. The first is used in an attempt to examine the function and importance of inner city baths and beach like places as well as the opportunities and challenges associated with them. The latter contains a presentation of six categories developed by us to facilitate the planning of inner city baths and beach like places.

Demand has become increasingly difficult to forecast in today?s volatile markets. Being able to produce towards real demand is becoming vital for companies, since inventories of finished goods are expensive to maintain and because miscalculated products tie up capital that in the end is never repaid. More and more companies are using postponement strategies to delay the process of producing until real demand has become known. Tooling Support Halmstad is a company within the manufacturing industry, which has become aware of the benefits with postponement strategies for parts of their production.

The purpose of this report was to investigate to which extent local presence of large herbivore mammals (Alces alces, Cervus elaphus, Capreolus capreolus, Dama dama and Sus scrofa) covaries with small rodents (Myodes glaerolus, Apodemus flavicollis and Apodemus sylvaticus? The hypothesis was that high abundance of wild ungulates would inhibit the density of small forest rodents. The data was collected during field work within FoMA (Environmental Monitoring Assessment)/SLU (Swedish University of Agricultural Science). The Ungulate dropping inventory and rodent trappings, which is the base in this report, where performed 2012 ? 2014 in Gnesta/Nyköping municipalities (G/N) with a relatively high density of wild ungulates and Vetlanda/Växjö municipalities (V/V) with relatively lower wild ungulate density.

The number of ideas at innovative companies usually exceeds the amount of available human ormaterial recourses, this include ideas for development of new products. Since they are not able to doeverything they want to do they have to choose between ideas to develop new products. This includesthe decision on when to start, stop or kill a project as well as the thought process of prioritizing betweenongoing and potential projects.Project Portfolio Management (PPM) is an organizational process, with the purpose of systematicallyorganizing and running the activities that aim to evaluate, select and prioritize ideas and projects fordeveloping new products. PPM include four major goals to be fulfilled; Maximizing Value of thePortfolio, Achieving a Balanced Portfolio, Achieving a Strategic Alignment and Running the RightNumber of Projects.The purpose of the thesis was to develop a more visual and formal PPM process for the early stages inproduct development in one department at St Jude Medical AB, Sweden.The thesis was conducted by following a methodology known as Process Modules. The methodology isan approach for developing a PPM process that fits a specific company.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

Buffer zones play an important role for the water quality in our watercourses. When harvesting a forest close to a watercourse a buffer zone should be left. When it's not left, it will lead to radical changes in the environment for the water organisms. The overall purpose of this thesis was to illuminate the production- and environmental thinking when establishing new buffer zones in south of Värmland. The partials goals were to determine choice of tree species, ways of regenerate, occurrence of soil scarification and the occurrence of machine tracks in newly established buffer zones.