Sökresultat:
5990 Uppsatser om Vehicle electronic control systems - Sida 9 av 400
Konceptarbete om skidbalk i kompositutförande till BVS10
This thesis has been performed at BAE Systems Hägglunds, which is located in Örnsköldsvik. Hägglunds has a wide background of engineering, where they have manufactured all from airplanes to lifting cranes. Currently they only produce track vehicles at Hägglunds, where they manufacture the CV90 and BVS10 models. This thesis concerns the BVS10 which is an all-terrain-vehicle. The main purpose with the BVS10 is to enable transportation of material and personnel thru tough terrain.
Lane Keeping Aid : ett förarstödjande system för bilar
Many traffic incidents are due to the driver?s lack of attention, resulting in dangerous lane departures, either sliding off theroad or into the oppose lane. These kinds of incidents often have serious outcomes, which has led to much effort being concentrated on preventing or lessening the damages when the incident is already a fact, for example by installing safety belts and air bags. These measures may be considered to be acts of so-called passive safety. Active safety on the other hand, means that the safety systems intervene before the incidents have occurred.
Belöningssystem i heterogena organisationer -I teori och praktik
The purpose of this master thesis is to, with the strategies of the organization and the preferences of the co-workers in mind, explore how reward systems can be designed in heterogeneous organizations. This is done by interviewing store managers and sales personnel in a heterogeneous organization. The frame of reference deals with theoretical approaches on reward systems and is divided in the following sections, individual or group based, differentiated or not differentiated rewards systems and goals, measurements and rewards. These sections are highlighted from the following aspects, equity, implementation possibilities and finally environment. The theoretical discussion ends in the conclusion that heterogeneous organizations should have several different reward systems, but not if a restructuring process is in progress or the system becomes too costly.
Tryckt eller elektroniskt? Bibliotekariers användning av referensverk på svenska folkbibliotek.
The main purpose of this Masters thesis was to examine how the Internet and other electronic sources have affected public librarians use of printed reference sources. During the last couple of years the use of the electronic sources - in particular the Internet has become more established in the Swedish public libraries. Our aim was to examine if and how this has affected the use of the printed reference sources. This has been examined on the basis of the following factors: the gender and age of the librarians and how long they have served in the library. We also examined if the size of the library affects the use of the printed and the electronic reference sources and also which factors that are most important when librarians acquire reference sources.
Tillämpning av Unified Process och Design Patterns vid integrering av system
The computer consultant company Create in Lund AB wishes to facilitate their invoice routines, as it at present is required that the administration finds and compares information from two different systems.The purpose of this thesis is to develop an invoice management system that simplifies the invoice management process for the administration at Create. During the development of the system, I have chosen to follow the software development process Unified Process and also tried to find design patterns that can be applied to the integration.The result of my project is a self-contained application developed using the Java programming language that communicates with the databases of the other two systems and presents relevant information to the user as a set of invoices. Of the 23 design patterns I studied, I used four of them in the invoice management system. However I couldn?t find any connection between any design pattern and the integration of systems.
Elektronisk mobbning : En kvantitativ studie om elektronisk mobbning med fokus på genus, anonymitet och konsekvenser
Abstract:Today many adolescents have access to computers and mobile phones. They prefer to socialize through these means which has led to a new kind of bullying, the electronic bullying. The purpose of this study has been to examine the electronic bullying from the perspective of gender, anonymity and the consequences that it may lead to. We have chosen a quantitative approach by using a questionnaire survey targeting young people between the ages of 15-16 years in Kalmar county. 163 respondents took part in the survey, 78 girls and 85 boys. The gathered material is presented by means of contingency tables and has been interpreted by gender socialization, deindividuation and dehumanization.
Ultraljudsmätare för bubbelfälla
This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.
Elektronisk mobbning: ur ett professionellt perspektiv
The purpose of this study was to examine how professional workers understand the bullying problem among Swedish youth in the age of 13-15 years. The main focus was to examine the new phenomena electronic bullying, from a professional point of view.The biggest question to answer was: "How does the school and organizations understand the bullying situation among Swedish youth today?" Individual interviews with professional social workers within the school and nationwide organizations have been used to fulfill the purpose of this work. Two different respondent types were used in order to get a wide perspective and a dynamic view.Electronic bullying had increased, but the school yard was still the most common arena for bullying, according to the respondents. The schools tried to prevent bullying, but the social workers felt that they lacked some knowledge of electronic bullying, because it was relative new.
Interorganisatoriska relationer i filmbranschen: En fallstudie i samproduktioners påverkan på svenska
This paper investigates and explains the existence of different governance structures in the Swedish film industry. Using a theoretical framework of transaction cost economics, it is shown that trust follows from frequent production projects, affecting the distributors? control of producers, cinemas, video retailers and television. Control becomes more flexible, informal and less time consuming. Furthermore, the control of the distributors? relationship with television and cinemas proves to be multidimensional and affected by transaction activities, as well as by demands from previous parties in the value chain.
Installation av övervakningssytem ombord på fartyget M/S Andromeda
This report is regarding an electrical installation of an alarm system on a post fishingboat called Andromeda. The background of the installation was an earlier andinadequate alarm system that led to a motor failure. The ship was taken out of serviceand was sold to Björn Magndahl who rebuilt it to a yacht.The project was conducted partly by developing the existing systems, partly bydocumenting the work by means of electrical blue prints. Except the alarm systems, aninstallation of the frequency control unit for the bow thruster was installed.The installation was working fine and the outcome of the documentation was handedover in a form of a binder during the test drive of the systems and the assignment wasapproved..
Från "Word of Mouth" till "Electronic Word of Mouth" En studie i hur begreppets innebörd förändras över tiden
Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2012:20.
Automatisk trimning av drivsystemreglering från MATLAB
This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..
Uppföljning inom ett vårdvalssystem - En fallstudie av uppföljningen av husläkaruppdraget i Stockholms Läns Landsting
This study aims to examine the effect the evaluation system used by the Stockholm County Council, has on how the healthcare providers themselves conduct the evaluation regarding their own operations. This is done through a qualitative case study of the evaluation systems of the Stockholm County Council and of four primary healthcare producers concerning one primary healthcare contract. The evaluation systems were analysed using Merchant and Ver der Stede's (2007) framework for different types of control. In order to give a more detailed picture this framework was complemented with different types of performance measurement. The evaluation that the Stockholm County Council conducts was found to have little influence on the providers own evaluation with the exception of the quality indicators that are rewarded with a monetary bonus..
Smart Control : En reaktion på EU:s ekodesignkrav
The purpose of this thesis is to assist the Swedish energy company NIBE Energy Systems in their studies of adaptive regulation applicable to electrical water heaters. Due to coming energy classifications of these appliances in the European Union, NIBE Energy Systems needs to use adaptive regulation, called Smart Control, to keep their products in the best possible energy class and remain competitive to the market. By using this Smart Control regulation a 2-3 % improve-ment of efficiency can be credited the system. This is a small number, but heavily needed, since the energy classes are based on the idea that the European Union is provided with electricity from coal condensate power resulting in a 40 % maximum efficiency. Furthermore, doing noth-ing will result in some water heaters not being approved to use on the market from 2015 due to low efficiency.
Läkemedelssökning i vårddokumentationssystem : En användarcentrerad utveckling av läkemedelssökning i vårddokumentationssystem
This thesis examines the problems related to IT in the Swedish healthcare system, specifically the drug searching part of the electronic healthcare systems used in Sweden. The question formulation is divided into two questions: What parameters and functions are of greatest importance when performing a search on drugs, and how should these be presented in a graphical user interface? Thus the purpose is to answer these questions through developing a design concept, in the form of a prototype, which describes how a drug search can be carried out.The entry point is a central quality checked drug database that is managed and owned by Swedish county councils and regions. The problem is attacked through user-centered methods where interviews of physicians and developers, in conjunction with observations, are used to give an overview of the problem area as well as to specify a requirements specification for the prototype that this thesis aims to develop. The thesis result is a requirements specification in combination with a prototype that exemplifies how drug searching can be performed, the prototype is based the requirements gathered from the interviews with the user group of physicians..