This report is about the impact climate change has on the water and sewage systems in general, and the situation in the municipality of Karlstad in particular. Which vulnerabilities are linked to water and sewage systems with regard to climate change and extreme weather situations, what are the possibilities to adapt the system to this and what significance does climate adaptation of the water and sewage systems have in relation to sustainable development?To answer these questions I have studied literature on the subject and interviewed several people who work with these types of questions. The answers I have received state that there are a multitude of vulnerabilities linked to the water- and sewage systems, but that there are also many strong interests which strive to take measures and adapt to a changed climate. I have also come to the conclusion that the starting points and views of the possibilities to act differs between the people that I have interviewed, but that theses problems are built into the concept of democracy..

Transfer pricing including internal loans have increased in recent years, making it easier for companies to minimize their taxable income. After the Swedish court case Diligentia, there have been discussions regarding the influence of a parent company's transparency and control of the subsidiary with regards to the interest rates on internal loans. In court cases that followed Diligentia, the Swedish Tax Agency argued that a parent company always could be assumed to have sufficient transparency and control of the operations in the subsidiary, and therefore reduce the risk on their debt obligations. This thesis seeks to analyze the effects of the transparency and control a parent company has with regards to interest rates on internal loans. The analysis is conducted by analyzing court cases similar to Diligentia.

The purpose of this study was to increase the understanding of how patients following cerebral vascular attacks percieve personal Control and their ability to influence the course of their rehabilitation. Specific questions relating to the concept of Health Locus of Control such as perception of personal responsibility and own influences as well as the recognition of the influence of outside phenomena such as faith, luck and divine power were asked for. The empirical findings of this study were based upon semistrucutural interviews with five respondents. The results showed that the respondents efforts, together with the efforts of others were a necessity in successful rehabilitation. The influence of faith or luck on the other hand, was not percieved as a factor for success.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.

Agencies towards Sustainable Development ? A Study of Environmental Management Systems in Governmental Agencies 2005A vision of the Swedish government is to build an ecologically sustainable society. A tool in this effort is to implement environmental management systems (EMS). The aim of the thesis is to present in which phase of the implementation of EMS Swedish governmental agencies are. This will be done by compilation and evaluation of agencies? yearly environmental reports.The thesis is written in co-operation with the Swedish Environmental Protection Agency (Swedish EPA).

In order to reduce the price for, and improve the performance of automatic control systems for magnetization of synchronus generators, the possibilities of using a PC based software PLC system, Programmable Logic Controller, has been investigated. The result is a system based on the CoDeSys software PLC with runtime environment from 3S-Software, communicating with external units via Modbus fieldbus. System price is reduced from ?5000 to ?2000 and system processing speed is reduced from 10 ms for a Siemens S7 PLC to 4 ms with the CoDeSys PLC system though unsolved problems with runtime seizure caused by improper settings in the PC BIOS..

The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard protocol J1939.Important conclusions: The use of CAN protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.

The purpose of the thesis is to increase the knowledge of the deregulation of the mobile telecom market in Sweden, with focus on the time after the Electronic Communications Act (EkomL), by: (1) Describing the thought behind the Electronic Communications Act. (2) Assess how the National Post and Telecom Agency (PTS) has acted. (3) Assess how the operators have reacted. (4) Investigate the regulation?s effects upon competition.

The purpose of this study was to investigate the relationship between Health Locus of Control, Exercise habits, Food habits and Self-esteem (Personal self and Physical self) between two groups of student teachers at a university in the south of Sweden. Is health such as exercise, eating and self-esteem something that is controlled by internal or external factors? Student teachers that participated in Physical and Health programme and student teachers that participeted in other programme were investigeted. The participants (N = 160) answered the questionnaire. The Health Locus of Control scale and Tennessee Self-Concept Scale were used.

Organisationspsykologi kan ibland upplevas allt fo?r problemorienterad med stort fokus pa? just problem och konflikter i organisationer. Det finns dock en inriktning pa? de fo?rha?llanden och processer som bidrar till att ma?nniskor, grupper och organisationer kan frodas och fungera optimalt. Denna studie syftade da?rfo?r till att underso?ka eventuella samband mellan positiv feedback, self-efficacy, locus of control och socialt sto?d.

During the last decades the Swedish local party systems have gone through some considerable changes. The number of parties present in local party systems have increased and in some cases even doubled. This makes coalition building between parties complex and parties will be forced to rethink their coalition strategies and adjust to the new circumstances. Theoretically, coalition building has often been considered and applied to national data and there have been just a few attempts to develop and theoretically explain coalitions on a local level. Thus the aim of this paper is to use different theoretical approaches to local data to test the significance of traditional coalition theories.

The work with this report has been focused on developing a methodology model for control at purchase. The methodology model covers parts classification, dispatching systems, batch shaping and more. The aim with the methodology model is that it will be used as an aid for a cost effective material planning to increase the value for customer.The work covers also a description of the present situation and the purchase process at Company X. Six parts have been applied, two from each class (A, B and C), in the methodology/model. The parts that have been applied are included in the flow between Company X and their supplier Company Y.Data have been collected trough literature studies, interviews and the company?s business system.

Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network.  An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS.

Since feeding fodder crops to dairy cows is a heavy and time-consuming but often disregarded line of work, this study wishes to view the different possibilities that are currently available to decrease the time to feed and apply this knowledge on an existing farm. For this purpose, four farms have been studied due to what feeding systems that are currently used and how long time the feeding required. The occurring systems are either mobile, i.e. a feed mixer operated by a tractor witch feeds the cattle via a drivable fodder table, or a stationery mixer, i.e. an electrically powered mixer which fills an automatic feeder.