This master thesis is a study on how a rategyro triad, an accelerometer triad, and a magnetometer triad can be integrated into a navigation system, estimating a vehicle?s attitude, i.e. its roll, tipp, and heading angles. When only a rategyro triad is used to estimate a vehicle?s attitude, a drift in the attitude occurs due to sensor errors.

The purpose of this master thesis is to evaluate how internal vehicle information inScania buses and trucks can be used for evaluation of driver performance regardingfuel economy, vehicle wear, traffic safety, emissions and cargo damage. To someextent it was examined whether this information could be used for training the driverto a better driving style. In addition, a prototype for such a system was developed.By first defining what distinguishes a talented driver and how he/she differs from apoor driver, followed by a study of the internal vehicle communication, a system thatin real-time gathers and interprets vehicle data could be developed.The resulting system can with reasonably high reliability detect a number of trafficevents (such as braking, lane changing or hilltops). At each such event, the driver?sbehaviour can be evaluated.

The challenges facing low voltage grids are rising as an increasing number of domestic houses transition from fossil fueled heating to electricity based heating. Several environmental goals and visions have the same transition from fossil based power to electricity based power in mind for the transportation sector. One of the most important tools for this transformation is widely regarded to be the electric vehicle. With the demands of the electric vehicle pressuring the power grid, several questions arise regarding the growth of the electric vehicle market and what repercussions it may have on the grid. This paper focuses on a typical low voltage grid in southern Sweden and what effects a growing electric vehicle market may have on it. Through computer-assisted simulations based on several future scenarios regarding the EV market, this paper finds that few modifications and reinforcements are needed on this particular grid within the next 10 to 15 years.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Bitcoin is a digital currency that is used by people all around the world. The goal of this paper is to give an idea about how much trust there is in bitcoin among its users. This paper has used an online survey aimed at bitcoinusers and a content analysis to collect data about this trust.The conclusions show that there seems to be some trust in bitcoin as a technology and this is based on that the users have a good understanding about how bitcoin works. They also share their knowledge about bitcoin to people around them. The trust between people in the bitcoin network on the contrary doesn?t seem as high because certain technological properties hurt this trust.

Introduction: Interplay between all the different subsystems of the financial markets is currently considered as an important internal force in the market. In a financially liberalized economy exchange rate stability is a basis for a wellbeing stock market. If these interactions between all the different subsystems of the financial markets are not detected, this means that there is information inefficiency in the markets.Problem: Can we find any correlation between changes in currency, interest rate and bonds with the stock market index? If so, how do these changes affect the Stockholm Stock Exchange?Purpose: The purpose of this study is to examine if there is any linkage between the interest rate, currency and bonds with the stock market. The researchers wanted to find out how these variables affect the stock market index OMX S30 which consists of the 30 largest companies on the Stockholm Stock Exchange.Method: This research has been based on a quantitative approach.

Vehicle simulators are becoming more common in vehicle industries. Company earns lot of money on simulations instead of real tests. Real tests are necessary but not made so extensively as before.In this thesis the building of an vehice simulator will be described and a comparison between three different cruise controls. The three cruise controls are PI-regulator, a regulator who regulates after positions in the terrain and a MPC-regulator. The reason for choosing this three is to see the difference between simple regulation and more complex regulation with respect to fuel consumption, travel time and complexity.The vehicle simulator is made in Matlab/Simulink, Visual Studio and Open Scene Graph.

The capacity to extract information from vehicles has the potential to be very beneficial. Performing analysis on information about fuel usage, emission values and other driving properties of a vehicle can lead to great economic and environmental benefits.This report contains descriptions of two prominent systems for retrieving information of this nature from a vehicle, On-Board Diagnostics and FMS-Standard, and of an implementation of FMS-Standard.The conclusion drawn after this investigation is that these systems do indeed offer access to the benefits mentioned earlier, although to varying degrees and with differing prioritisation..

Today's communication solution between the vehicle and trailer is one many see as anon-viable solution, then breakdowns on both the lights and cables are common. Now, anew innovation enters the market, a system that can transmit wireless control signalsbetween the vehicle and trailer.Parvus and Zap, the two solutions that the projekt group has come up with during thisthesis work carried out over the last year on Utvecklingsingenjörsprogrammet.Technologists Peter Jägevall and Christopher Åberg has developed this project on theirown. The group has developed various concepts and chosen to work on, two of them.The project has resulted in this report and a prototypeThe solution that the group has developed is a wireless communication between vehicleand trailer. The project team has developed new power-efficient LED lighting fixtures inorder to implement an internal power source in the trailer. The result of this has becomea maintenance-free and wireless product to trailers.

This Master of Science thesis project handles issues around managing data from the digital tachographsystem. European legislation states that companies must download the data of the digital tachograph systemand store it for at least one year for control purposes. The system stores data on the vehicle unit located inthe driving compartment and on smart cards personal for each driver.Acquiring data from the previous analogue tachograph was done instantaneously since the data wasphysically printed to a circular paper chart when driving. To acquire data from the digital system one mustperform a download from the vehicle unit and later transfer it to some form of backup solution for longterm storage. Data must also be downloaded from the driver smart cards.Download of data from the vehicle unit is the most time consuming task and may take up to 30minutes pervehicle.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

The purpose of this master thesis is to construct a steering transmission, for a trackedvehicle, containing two hydraulic circuits which are connected. The steeringtransmission should be mechanical to avoid steer-by-wire.BAE Systems Hägglunds has in an earlier study examined a system with two hydraulicpumps and one hydraulic motor, but the safety of the system wasn?t sufficient.To achieve sufficient redundancy there must be two hydraulic motors, which arecontrolled separately. When the two systems are connected in one point, this point is acritical part of the system because it directly affects both circuits. If one of the hydrauliccircuits fails the other should be able to operate independently as a steeringtransmission.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

The subject of this bachelors degree project is an interior layout for road ambulances.Landstinget Västernorrland (LVN) wanted a layout concept that would be used to com- municate their design intentions to the ambulance producers during their purchase process.Designing ambulance interiors is an extremely complex process since there so many fac- tors to take into consideration. It ?s not just about taking the equipment and place it where there is space left in the cabin. You have to start with the user in focus and the tasks that are to be performed in the ambulance environment.It ishard to find design solutions that will fit 100% of the ambulance personnel?s working routines for 100% of the tasks.