This paper is about the facades and the streets impact on theexperience of the city and how architects can create cities forthe human kind with simple tools that makes a hugh difference forthe experience of urban space.As the cities are growing in a faster rate and as more people moveto the cities, they will also affect more people. The differentstructures that can be found in the cities therefore gets moreimportant and giving design to city structures also gets morecomplex because of our higher demands on urban functions andcontent. It?s difficult to evaluate the ultimate city structuresince all people experience their city in different ways, butarchitects still should be able to create urban spaces thatis suited for the human kind, just as we can create differentbiotopes for flora and fauna. Therefore there must be generalideas of what the human being experience as good or bad and theseshould be guidelines when designing urban space.Since urban space is something that most people experience everyday it doesn´t always have a clear impact on them.

A new material model, for the FE-program ADINA, has been verified against twoexperiments. One unreinforced concrete beam and one reinforced concrete beam.The model, DF-concrete, has the possibility to estimate true concrete. However theresults indicate that in order to be sure that the estimations are true, there ought tobe data from the true concrete to verify against.Two FE-models have simulated the behavior of a ring-shaped part of the nuclearcontainment vessel. The results from the first, frictionless, model agree with similarsimulations and hand calculations for high pressures in the containment vessel. Thesimulations of the nuclear containment vessel show cracking in the concrete after10-11 bars of over pressurization.

Shopping malls have been growing in numbers during the last few decades. As an effect, consumers are increasingly placing a greater amount of their purchases under one roof. The problem is that stores within these malls have to fight for the consumers' attention in competition with all the other stores. Thus, making consumers noticing their store is critical for success. Creating attention through floor advertising could be a potential way of doing so.

Problems:How would a decision model that takes into account more aspects and dimensions than just the financial aspect look for smaller service compa-nies? What aspects are important to consider in such a decision model?Purpose:The purpose of this master thesis is to develop a decision model based on previous research, to improve decision making in smaller service com-panies ? by considering perspectives that traditional investment calcula-tions ignore.Method:The study was qualitative and was based on both primary and secondary data. As data collection method for the development of the model we used literature search on previous research. The study?s primary data consisted of responses from five smaller service companies.

The purpose of this thesis was to investigate if Swedish agencies preserve their websites according to the Swedish archival legislations and guidelines. As a theory the OAIS Reference Model (Open Archival Information System, developed by US Consultative Committee for Space Data Systems, CCSDS) has been used as a model to show how important it is to develop strategies for public digital information which has to be preserved for long term. The ingest function in the OAIS Reference Model demands that files are prepared for long term preservation and requires that the digital information fulfils established technical requirements.In the study the Swedish National Archive and their advices about preserving websites to archivists on the Swedish agencies are being studied. To control if the agencies meet the requirements for their management and preservation of their websites a survey was sent out to investigate if Swedish agencies preserve their websites. According to the survey result, 84 of 113 agencies preserve their websites in some way. If the technical requirements really was met could not be verified in this thesis, the results was relied on the responses from the authorities.

The aim of this Master's thesis is to explore how the localisation and the design affect the conditions for a school-media centre. A school-media centre is in this study a place where the students seek, find and evaluate information, discuss and exchange ideas. An active place for generating knowledge. The method applied in this study is "Space Syntax Analysis", a quantitative method with visual representation of the results. In the theoretical framework, space is the voids between walls, doors and ceiling, between furniture and bookshelves.

Through geopolitical theory this thesis explores how conflicts within states can be read and understood according to an analytical model determining one or several possible causes for the conflict.  The model is created by the author and reflects geopolitical theory by giving three possible explanations to an intrastate conflict: culture, economy or territorial construction. The aim of the thesis is testing this model on two selectively chosen case studies ? i.e. two intrastate conflicts ? namely: the upcoming referendum in Scotland and the terror attack at Tiananmen Square in China.

The work with this report has been focused on developing a methodology model for control at purchase. The methodology model covers parts classification, dispatching systems, batch shaping and more. The aim with the methodology model is that it will be used as an aid for a cost effective material planning to increase the value for customer.The work covers also a description of the present situation and the purchase process at Company X. Six parts have been applied, two from each class (A, B and C), in the methodology/model. The parts that have been applied are included in the flow between Company X and their supplier Company Y.Data have been collected trough literature studies, interviews and the company?s business system.

This essay answers the question: How can a manufacturing business fulfill the information demand in the processes; purchasing, production, warehousing, order and delivery?The question has been answered through different kind of studies, such as literature, documents, Internet search, interviews and observations. The essay is written from a hermeneutic point of view and by using qualitative research. The result has been validated by two different manufacturing businesses.A simple information logistic model is the result of a comparison made between theory and empery. The aim of the model is to describe how a manufacturing business can fulfill the information demand by using different methods.

This project is a deepening in how the space in psychiatric care setting can promote and improve thepatient?s well-being. The aim with this study was to create a manual for architects and the care to takepart of. This would consist of different aspects of how the space can be created for a more secure,care taking and healing space. With help of the manual the study would continue by creating a healingpatient room in a psychiatric clinic.The main questions were; can we create an environment which improves the healing process for thementally ill? What are the factors that we need to consider to creating a room for psychiatric care?This study only looks at the patient room, the common room and how the environment can affect theiremotional and physical well-being.By taking part of already made studies in this subject or similar, making my own studies by visitingpsychiatric departments and exploring how the spaces there contribute or not contribute to the healingprocess of the patient.

The aim of this report is to analyse the logistics of a medium sized restaurant and give an overall solution for improvements on the restaurant's logistics. The restaurant of interest belongs to Laponia Hotel and is located in Arvidsjaur, Sweden. Investments for over 100.000 Euros are planned for the hotel, which includes a reconstruction of the restaurant. The details on how the restaurant will be reconstructed are not yet known. I therefore chose to analyse the problemin general terms and find a solution that is focused on the logistic system itself rather than its layout.

Att köpa ekologiskt är ingen ny företeelse, men i takt med att både e-handel och efterfrågan på ekologiska varor konstant ökar så behövs det stöd för designers för att kunna möta dessa utmaningar. För att kunna designa e-handelswebbsidor med ekologiska valmöjligheter krävs förståelse för användaren och dess behov. Genomatt kartlägga målinriktade beteenden går det att påvisa när en användare är mottaglig för ett ekologiskt val på en e-handelswebbsida. En mental modell byggs utifrån användares målinriktade beteende och denna kan användas som stöd av designers för att förstå när en användare är mer mottaglig för ekologiska val på en e-handelswebbsida. Denna studie resulterar i en identifiering och kartläggning över när en användare är mer öppen för ekologiska val..

This master thesis presents a Model for Evaluating and Managing Interruption Risks in connection with Business Continuity Planning (BCP), developed for Swedwood International. The model consists of a template with instructions. The model should be easily understood and useful for establishing a plan for BCP. This is achieved by including the contents and procedure of BCP and the main supplychain risks in the model. The purpose of a BCP plan is to describe how an enterprise will return to business as usual after an interruption, e.g.

An increase interest of new methods and tools has begun to grow in the real estate business, this new trend causes an increase in new programs that aim to simplify processes of energy-efficiency and environmental issues.After consulting with Björn Alsmark from Bjerking AB, an architect and engineering company, we made a decision that the Degree Project is going to examine the program IES (Integrated Environmental Solutions) with some integrations from Revit Architecture application.To be able to examine IES, we got access to a completed project from Bjerking. The project is a nursery school in Uppsala. An application has been handed in from Bjerking to make this project to a Green Building-certificated project. According to Bjerking own calculations (with the energy-calculation program Enorm), the consumption of energy of the nursery school is 48 percent lesser than required by BBR.An evaluation of IES and Enorm has been made with an aim to compare these two programs and find out if IES is an appropriate program to replace Enorm. Does Enorm or IES come up to BBR´s recommendations?The Degree Project cover 15 ECT, that required several adjusting and delimitations, and the study sketch ended with a literature study.After finishing the study sketch the modeling of the nursery school began.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.