Cardiac troponin I (cTnI) is considered a specific and a sensitive biomarker of cardiac disease, and due to a high inter-species sequence homology; human cTnI assays can often be used in veterinary medicine. The main aim of this study was to perform an initial evaluation of a human cTnI test, the Meritas Troponin I test, for measurement of equine plasma cTnI, in order to investigate whether the test could be a possible subject for a more comprehensive Validation. The hypothesis was that the test could measure equine cTnI, as there is a good homology between equine cTnI and human cTnI. The evaluation included a dilution parallelism, an intra-assay precision study and measurement of plasma cTnI healthy horses. In the dilution parallelism and the intra-assay precision study, equine plasma with previously established high cTnI concentration, according to another cTnI assay, was used. In addition, cTnI concentration was measured in plasma, collected from 19 horses, without signs of disease at physical and ECG examinations. The obtained curve in the dilution parallelism was linear, indicating that the Meritas Troponin I test can be used to measure different concentrations of equine cTnI in plasma.

A distributed hydrological rainfall-runoff model has been developed using a GIS integrated with a dynamic programming module (PCRaster). The model has been developed within the framework of the EU-project TWINBAS at IVL Swedish Environmental Research Institute, and is intended for use in WATSHMAN ? a tool for watershed management developed at IVL. The model simulates runoff from a catchment based on daily mean values of temperature and precipitation. The GIS input data consist of maps with soil type, land-use, lakes, rivers and a digital elevation model.

Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.

Honey is a product that may contain pesticide residues due to contamination from bees pollinating various plants as well as elimination of vermin inside the hive. Different methods are needed for analysis of pesticides, since the term includes a wide range of different substances. National Food Administration lacks a validated method for determination and quantification of pesticides in honey using liquid chromatography tandem mass spectrometry, LC-MS/MS. The technique is especially important in analysis of polar and non-volatile pesticides, where gas chromatography is not functioning optimally. After investigating what pesticides could be found in honey produced in Sweden, a number of four pesticides suitable for analysis with LC-MS/MS was compiled; boscalid, impidacloprid, tau-fluvalinate and thiacloprid.

In today?s constantly changing market place most organizations need to reorganize. Reorganization carries risks that could jeopardize the organization's well-being and profitability. To minimize these risks, companies need a tool to help them analyze how the reorganization will affect the business before they make major changes. Such tool has now been developed by researchers at KTH.

The aim of this study was to evaluate different types of volume and taper equations that can be used to predict single-tree stem volume and stem diameter at any given height along the tree stem for plantation grown Sitka spruce (Picea sitchensis (Bong.) Carr.), Norway spruce (Picea abies (L.) Karst) and White spruce (Picea glauca (Mounch) Voss) in Iceland. A number of published tree volume equations were tested and modified to predict the total stem volumes over bark but three logarithmic equations were taken for more in-depth analysis. Three taper equations were tested. Two variable-exponent equations (Kozak 1997, Kozak 2004) and one exponential equation described by Biging (1984). Data from a total of 617 sample trees were used in this study, collected from stands in various parts of the country and present different types of stands growing in different soil types and cover most of the site conditions suitable for forestry in Iceland.

Because of new emission and on board diagnostics legislations, heavy truck manufacturers are facing new challenges when it comes to improving the engines and the control software. Accurate and real time executable engine models are essential in this work. One successful way of lowering the NOx emissions is to use Exhaust Gas Recirculation (EGR). The objective of this thesis is to create a mean value model for Scania's next generation EGR system consisting of a poppet valve and a two stage cooler. The model will be used to extend an existing mean value engine model.

Denna studie behandlar hur lärare undervisar i naturvetenskap och vilken didaktik de använder. Det finns många synpunkter kring hur den naturvetenskaplig undervisning bör vara utformad, men fungerar teorierna i praktiken? Vad tror pedagogerna på fältet, som vi talat med? Vad är en effektiv inlärningsmetod? Hur formar man som pedagog sin undervisning efter sina elevers erfarenheter och hur utvecklar kan de hjälpa eleverna att få en djupare förståelse för naturvetenskapliga fenomen? Det är vad denna studie kommer att handla om.Vårt syfte är att belysa att det finns många olika sätt och perspektiv på den naturvetenskapliga didaktiken. Vi har använt oss av kvalitativa intervjuer av pedagoger ute i verksamheterna som alla har något att delge av hur de praktiserar sin didaktik och hur de ser på elevers lärande inom de naturvetenskapliga områdena..

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and Validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

This thesis is an evaluation of a new design concept for statorfeets in Gallejaur hydro power plant. Founder of the work is Vattenfall AB Vattenkraft. During the 70- and 80´s nuclear power began to be phased in to the Swedish grid, which meant that hydropower became an important source of rules. The generators began running in so called intermittent operations instead of basic operations, which meant 300-600 start/stop per year instead of one-ten numbers start/stop per year. In order to deal with the thermal forces that arise at every start and stop suppliers began to mount so called sliding joints, which is to take advantage of these forces and maintain the stator shape.

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for calibration and Validation of stationary groundwater models is discussed. The time dependency between surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the surface water levels. Hence the use of such long-term means for calibration and Validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

Kort Upprepad Skattning av Ätstörningssymptom- Patientversion(KUS-P) är ett självskattningsformulär, avsett att mäta de vanligastesymptomen hos personer med ätstörningar. Formuläret har använts iforskningssammanhang samt i kliniska sammanhang. Depsykometriska egenskaperna har inte tidigare undersökts. Syftet medföreliggande studie var att validera och normera formuläret.Självskattningar från en normalpopulation bestående av 945gymnasie- och universitetsstuderande samlades in för studiensanalyser. Data på 270 patienter från en ätstörningsenhet fungeradesom klinisk jämförelsegrupp.

Föreliggande uppsats har som främsta syfte att skapa en prognosmodell för bruttoregionalprodukten (BRP) för Sveriges 21 län. Behovet av en prognosmodell motiveras av att Statistiska centralbyrån (SCB) i dagsläget redovisar de definitiva siffrorna av BRP med två års fördröjning. Det kan därmed finnas ett intresse hos regionala beslutsfattare att få en uppfattning om hur BRP utvecklats under de två senaste åren. Metoden som används är bayesian model averaging (BMA), vilken kommer att utvärderas samt jämföras med två andra metoder: En multipel linjär modell som skattas med minsta kvadratmetoden där variabelselektion utförs med best subset selection (BSS). Den andra metoden är en tidsseriemodell och kallas här för en longitudinell modell (LM).