The purpose of the present study is to investigate mindfulness as a New Age phenomenon in the modern western society. Since a religious phenomenon does not exist in a vacuum, but is dependent on its historical and cultural context, my aim is to give a broad depiction of mindfulness and New Age in its wider context, the historical background and the societal implications of common values, themes and concepts that are frequent in the literature, how mindfulness is presented by the authors of popular literature and also how it is presented in science. In order to bring forward a deeper understanding of New Age and mindfulness? role in the modern western society, my intention is to see how the authors of mindfulness claim validity of their doctrines in the discourse. Mindfulness attracts a wide range of perpetrators and is used in many areas in the society today.

This thesis is about how nationalism is constructed from two competing groups, Kosovo Albanian and Serbs. Kosovo for Serbs is a deep symbolic value that continues to be a Serbian identification. This is one of the main reasons why no Serbian politician has the courage to give it up. On the other side of the coin we have the Kosovo Albanians that only settles for independence. To recognize the independence for Kosovo could jeopardize the security for the Serbian minority living in Kosovo.

Emma Nordin: Emilie Du Châtelets analys av lycka: Upplösning av polemiken mellan illusion och förnuft. Uppsala universitet: inst. för idé- och lärdomshistoria, C-uppsats, höstterminen, 2012. The 18th century is a time period known for its battle with superstition, illusion and falseness. With the Torch of Reason the philosophers of the time were set on vanquishing everything untrue and lead mankind into what they themselves called the Enlightenment. Happiness had moved from Heaven to Earth in science, truth and pleasure.

This thesis was done after a request from the county?s administrative board of Västmanland to provide the board with a better understanding of how green areas have changed within Västerås municipality over time.The purpose and goal of this study was thus to measure and analyze how much of the green areas within Västerås municipality that have disappeared during the past one hundred years as well as to provide a review of previous studies regarding the importance of green areas for humans as well as the biological diversity.In order to answer these questions I have in this study used a combination of a literature study, cartographic analysis as well as a time series analysis. The computer software used to do the measurements of the green areas was ArcGIS which is a geographical information system.In the cartographic and times series anlaysis measurements and analysis was made of the district map of 1911, the economic map of 1950 and the property map of 2011. The measurements show that the municipality has grown with 46,3 km2 over the last one hundred years. New neighborhoods? have emerged and the municipality has expanded.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

This study was carried out in Jordan with the purpose to investigate the bacterial microflora of egg shells from cage systems and from deep litter floor systems. Another aim wasto get a general impression of the hygiene, at farm level, of egg production in Jordan andthe factors affecting it.Eggs from two cage systems and three floor systems were analyzed, regarding bacterialcontamination of the egg shells. Egg samples were taken from the storage room, the eggcradle in the cage system and from the nest and floor in the floor system. To get a generalimpression of the hygiene at the farms, swab tests and air tests were performed. Swab testswere performed with a sterile cotton swab at the same units as the eggs were sampled andair tests were performed by opening petri dishes where the hens were staying.

Background: Vacuum assisted closure, VAC, is a method which can benefit wound closure. There are not many reliable studies about the effects of VAC in different types of wounds. Previous studies have shown that patients have experienced pain during dressing changes.Aim: The aim of the study was to survey in what kind of wounds the vascular surgery ward have been using VAC, to study the treatment process of VAC and how it has been documented and also to investigate if patients with VAC experienced pain during dressing changes.Method: The patients were chosen from a ledger, which contained 77 patients that had been treated with VAC on the vascular surgery ward. Data were collected with a journal survey protocol.Results: The result is based on 67 patients with a total of 79 wounds. VAC was shown to have a good effect on wound healing and infected surgical wounds were the most commonly wound category undergoing treatment with VAC.

It is common knowledge that our horses do occasionally hurt themselves and cause damage to their bodies. They also manage to do it in the most remarkable ways. The problem is not that they hurt themselves, because everybody does so from time to time. The problem is that they often experience difficulties with the healing of the wounds. The cause to that problem is the fact that they often lose a vast amount of tissue, the wound is more often than not extensively contaminated and the wound is often found a long time after the accident occurred.

Advertisements have become a regular part of our everyday lives. We walk past them on the street; we admire them on the subway and even invite them into our living room in between prime time showings. The reality is that in today's modern times there is no escaping the daily bombardment of advertisement. To distinguish themselves from the continuous noise of the industry, advertisers battle to find unique ways to capture the attention of consumers. But is it possible that some advertisers take their techniques to an extreme in the struggle to be remembered This thesis aims at investigating whether it is possible to offend a consumer through an advertisement due to its extreme simplicity.

In some herds it has been observed that extremely short teats have become a problem; with a negative influence on the milking performance. The aim of this study was therefore to investigate to what degree the quality of the teats and the milk in cows with short teats is affected as compared with cows with normal teat length and furthermore if the milking performance could be improved by using a liner adapted to short teats. This study was divided in two parts. In the first part, it was examined if there were any differences between short teats and teats with normal length with reference to the milking performance, udder emptying, teat treatment, milk quality, and udder health. 11 pairs of cows were used and in each pair of cows one cow had teats shorter than 40 mm while the other cow had teats longer than 50 mm.

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

In the last few years people have become more and more aware of how humanity is affecting the climate. In the direction of reducing the greenhouse gases is to design engines with higher tensile properties and reduced weight, in order to achieve lower fuel consumption and cleaner fuel incineration in today's truck engines.In order to achieve these requirements it?s necessary to increase the combustion pressure in the engine. This requires higher tensile properties and high thermal conductivity of the engine material. The department of Component Technology at the University of Jönköping in collaboration with Volvo Powertrain AB, Scania CV AB and DAROS Piston Rings AB has been commissioned to develop this material and to find knowledge of material properties used in truck engines and piston rings used for marine applications.The purpose with this work is to analyze the tensile properties of a series of cast iron, cast under different metallurgical conditions.Four different series of cast irons have been analyzed from four points of view, carbon concentration, nodularity, amount inoculation and cooling rate.After the tensile test all specimen data was analyzed in a mathematic calculation program called Matlab 2006a.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

In the world we live in today the environmental issues has become increasingly important, and we have begun to realize that we can not continue to use fossil fuels at the rate we do. When it comes to generating electricity we are constantly trying to come up with cleaner and more efficient solutions. The fuel celltechnology is one such alternative and has been around for over 100 years. Yet, it is not until now that the world has started to notice this great technology. The fuel cell has been developed in several areas and can today be used for handheld electronics, vehicles and small settlements.

The project was made in cooperation with Coffee Queen AB, Arvika. The task was to develop and design a new cooler for the milk to Jura Impressa X9, an espresso machine. The good assistance with staff at Coffee Queen and engineers in China and at KPA in Karlstad led to a solution to the problem. It was a long road to get there, many different concepts was developed. When the day came to decide which concept to work with, the choice stood between two different technical solutions.