The physical map that has been used until now can in the modern days be replaced with digital maps available in smart phones and tablets. One disadvantage of both is that the digital maps require the user to have a fully functional sight. The problem with the research done so far is that it provides little explanation as to why developers have decided to design the maps in a specific way. This thesis has been designed to address this problem.In order to provide the knowledge needed, a literature study was done to construct interview questions to an employee from SG Access AB. These answers and the literature study were used to construct interview questions to members and employees from Synskadades Riksförbund  (SRF).

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

Det här arbetet preciserar ett problem utifrån ett problemområde som faller inom ramen för användarcentrerad design. Den preciserade problemformuleringen är: I vilken utsträckning kan ett gränssnitt göras användbart genom prototyping, aktiv användarmedverkan och iterativ utveckling genom användningen av en modifierad version av ISO 13407 standarden som ett utvecklingsramverk? Den här frågeställningen har tillämpats och avgränsats till ett pekskärmsgränssnitt vid namn Navigator som är utvecklat av Asko. Resultaten visar att de gränssnittsprototyper som har skapats är användbara. Vidare visar resultaten även att det inte är tillräckligt att enbart använda tre nyckelprinciper för användarcentrerad design i syfte att uppnå användbarhet..

Denna rapport är resultatet av mitt examensarbete i informationsdesign vid Mälardalens Högskola. Rapporten behandlar utvärdering och utveckling av ett gränssnitt som används på charkuterimaskinen Handtmann VF 300. Målgruppen är nyanställda personer på charkuteriföretaget ?Ingemar Johansson i Sverige AB?.Rapporten beskriver det tillvägagångssätt som använts för att utveckla gränssnittet och målet har varit att göra det lättare för nyanställda att förstå hur det fungerar. Det nya gränssnittet skulle också minska olycksrisken och göra användarna tryggare.

The purpose of this essay is to examine the relationship between visual communication and female homosexuality within the field of magazine design. As the creative part of the project I have chosen to make a redesign of Lotus magazine, the very first Swedish magazine with lesbian and bisexual girls as the target audience. The questions of which the project is based on are: Which stereotypes, differences and similarities can be found in visual communication addressed to a heterosexual versus a homosexual target audience? What kind of design attracts non-heterosexual girls and how can I create a design for Lotus magazine that is appealing to lesbian and bisexual girls and yet still makes it possible to compete with traditional girls? magazines? In order to examine my research questions I have done literature studies within the field of gender and sexual identity in relation to visual communication. Additionally, I have analysed the design of competing magazines on the market and conducted a survey among representatives of the target audience of Lotus magazine..

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Trädgårdens hantverk och design 21 hp.

Ett mönster är uppbyggt av ett motiv som upprepas. Denna upprepning kan fortsätta i all oändlighet. Hållbar antyder långsiktighet. Mönstrets övergripande egenskap är oändlighet. Hur kan denna egenskap hos mönstret nyttjas inom mönsterdesign för att främja hållbar utveckling? Det här kandidatarbetet undersöker mönsterdesignens möjlighet att verka för hållbar utveckling genom att se till begreppet mönster ur ett bredare perspektiv, samt i relation till design för hållbar utveckling.

In this work a new design for S:t Erik?s square in Uppsala is being proposed. The square is situated in the middle of the city, surrounded by historical buildings. Today the square is a parking lot. The aim of the design proposal is to promote life and activity of pedestrians and cyclists.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

Under våren år 2013 har Emilia Andersson, en designingenjörsstudent på Högskolan i Skövde, utfört ett produktutvecklingsprojekt i samarbete med HAGS Aneby AB. Syftet med projektet var att utveckla en vippgunga vars storlek skulle vara anpassad för barn i åldrarna 1-3 år. Målet var att vippgungan ska kunna säljas över hela världen samt uppfylla den amerikanska standarden och europastandarden för lekredskap.Projektet inleddes med en förstudie och teori-fas, där bland annat litteraturstudie och konkurrentanalys genomfördes och annan information samlades in för att få djupare kunskaper inom ämnet. Därefter började idéer och koncept genereras, som sedan genomgick utvärderingar, så som användartester, vilket ledde till ett slutkoncept. Konceptet utvärderades med hjälp av bland annat hållfasthetsberäkningar och en antropometrisk analys.Den slutgiltiga vippgungan kan trots anpassningen för åldersgruppen, inte bara användas av 1-3-åringar utan också av äldre barn, tack vare att konstruktion och framförallt handtag ger extra lekvärden.

The communication with government and municipality through Internet has in-creased during the last couple of years. Therefore we have chosen to focus our bachelor thesis in this particularly area and the needs for usable web services for the citizens. In this bachelor thesis we are studying a increasing group users, namely elderly citizens. During the study we have analysed E-governments ser-vices usability through usability tests. The combination of conversations and meetings with individuals, observations of interactions and literature studies give us the opportunity to explore the users needs.