En människa har en viss mängd kapacitet för att utföra uppgifter. Om uppgifterna blir för svåra eller för många, det vill säga om den mentala arbetsbelastningen blir för hög, går det inte längre att klara av alla uppgifter och prioritering av de viktigaste uppgifterna blir nödvändigt. Piloter behöver ofta ta in och bearbeta en stor mängd information under instrumentflygning. Ofta måste en del av uppgifterna utföras samtidigt och på begränsad tid. Syftet med examensarbetet är att, med hjälp av en subjektiv mätmetod undersöka vilka moment under instrumentflygövningar som medför störst respektive minst mental arbetsbelastning.

Problem: Den svenska bankmarknaden befinner sig under förändring. Och i takt med att världen med hjälp av tekniska innovationer blir mindre, blir det också lättare för globala storföretag att etablera sig på nya marknader. Konkurrensen tenderar att öka bland Sveriges banker och det kan leda till att det blir enklare för bankkunder att välja en annan bank. Nu är det upp till bankerna själva att erbjuda tjänster och produkter som motsvarar kundernas krav. Syfte: Uppsatsen ska undersöka attityder samt belysa vikten av relationer och förtroende till personliga rådgivare i banker.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

Detta examensarbete behandlar dynamiska vindkraftmodeller i simuleringsprogrammet Power System Simulator for Engineering (PSS/E) som används av Svenska Kraftnät vid analyser av det svenska stamnätet. Syftet med examensarbetet har varit att förenkla Svenska Kraftnäts hantering av vindkraftmodeller vid olika analyser av nya vindkraftparker som ska kopplas in på stamnätet. Detta gjordes genom att undersöka om dagens modellering av vindkraft, bestående av negativa laster och tillverkarspecifika vindkraftmodeller, kan ersättas av en generisk representation med de modeller som finns inbyggda i PSS/E. Rapporten ger en teoretisk beskrivning av vilka tekniker som används i vindkraften idag och hur de vindkraftmodeller som används i PSS/E är utformade. För de inbyggda modellerna i PSS/E har både vindkraftverk med dubbelmatad asynkrongenerator (DFIG) och vindkraftverk med fulleffektomriktare studerats. Resultaten visar att en generisk representation av vindkraftverk med DFIG kan göras med den inbyggda modellen i PSS/E med de parametervärden som finns rekommenderade i denna rapport. I den inbyggda modellen för fulleffektomriktare finns dock begränsningar som gör det olämpligt att använda en generisk representation för denna vindkraftstyp. Övriga slutsatser som dragits är att de inbyggda vindkraftmodellerna i PSS/E inte är tillräckligt flexibla för att fullständigt kunna representera ett dynamiskt beteende från en godtycklig tillverkare i händelse av ett systemfel..

The CASA-paradigm, Computers Are Social Actors, was introduced in the book "TheMedia Equation" by Reeves and Nass. One of their experiments concluded that we tend to be polite to computers in the same way as we are to people. In this study I have replicated Reeves and Nass experiment but instead of a text-based interface I have used a virtual agentin order to find out if we are polite to the agents, or still to the computer. Two experimental setups was conducted. The two setups had a common first part that was carried out on onecomputer with one agent.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

Abstract I have made a Website called ?Art school? for Liljevalchs art Gallery, Culture administration in Stockholm and Culture school in Stockholm. It is with scholarship from these that this Website has been possible. The work whit the ?Art school? started in the autumn of 2005 and ended in May 2006 on distance from Stockholm towards Blekinge technology school in Karlshamn. The Webb place is for the general public, but most for people who have interest in art and for those how want to learn more painting in different mediums. This Websites I name: oil, watercolour, acrylic, coal, gouache, and graphite. On each one of these mediums you?ll get to know about their history, what technique they have, what sort of material you need, practise and tip.

AbstractTrendanalys av rapporterade störningar vid de svenskakärnkraftverkenAnalysis of trends in reported safety-related events atSwedish nuclear power plantsSafdar KargarThis degree project was conducted at the Swedish Radiation Safety Authority (SSM)as part of the bachelors program in Nuclear Engineering at Uppsala University duringthe spring of 2011.The Swedish Radiation Safety Authority (SSM) has developed a Windows baseddatabase called ?ASKEN? during later years. In this database more than 12 000 eventreports are stored sorted in three categories, category 1, 2 and 3. The databasecontains events from the start of Oskarshamn 1 in 1972 till present time.All nuclear power plants in Sweden are obliged to report any deficiency in theirbarriers and/or the defense in depth in obedience to SSMFS 2008:1.When a failure is detected or there is reasonable suspicion of a deficiency, the eventreport should be classified as a deficiency of category -1, 2 or 3 [1].The event reports are logged and archived in the register of SSM. The SSM task forceAnalys av Störningar på elproducerande Kärnkraftverk (the ASK-group), evaluates allincoming event reports and categorizes them according to established criteria.The aim of the project is to study and analyze the event reports in the database andidentity interesting observations and trends which should be investigated morethoroughly by deeper analysis to establish any positive or negative trends of reportedevents. .

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

The IPv6 protocol offers with some new functions, one of them is auto configuration. With auto configuration it is possible for nodes, i.e. hosts and routers, for automatically associated with IPv6 addresses without manual configuration. Auto configuration it is another protocol as it uses Neighbor Discovery protocol (ND) messages (ND is mandatory in the IPv6 stack). The main purpose of ND is that nodes can discover other nodes on the local link, perform address resolution, check that addresses are unique, and check the reachability with active nodes.There are exactly the same vulnerabilities of IPv6 as IPv4 and is now exception, ND if not properly secured.

The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard protocol J1939.Important conclusions: The use of CAN protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.