Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

Today there are commercially available databases with active features, i.e. active mechanisms are available for development of information systems. But the usage of active mechanisms is low in practice. This is due to the insufficient methodological support in analysis and design for developing ECA rule based software. It has been proposed that one of the most suitable ways to tackle this problem is not to develop new methods but to extend existing methodologies.In this thesis an extension of the Object Modeling Technique (OMT) is developed, called OMT-A, which is able to model active rules.

Med detta examensarbete vill vi belysa problematiken runt tredimensionell fastighetsbildning. Som objekt har vi använt oss av ett bergrum på Liljeholmskajen i Stockholm..

This masters thesis concerns a modeling project performed at Volvo Technology in Gothenburg, Sweden. The main purpose of the project has been to develop a physical model of the climate in construction vehicles that later on can be used in the development of an electronic climate controller. The focus of the work has been on one type of wheel loader and one type of excavator. The temperature inside the compartment has been set equal to the notion climate. With physical theories about air flow and heat transfer in respect, relations between the components in the climate unit and the compartment has been calculated.

An increase interest of new methods and tools has begun to grow in the real estate business, this new trend causes an increase in new programs that aim to simplify processes of energy-efficiency and environmental issues.After consulting with Björn Alsmark from Bjerking AB, an architect and engineering company, we made a decision that the Degree Project is going to examine the program IES (Integrated Environmental Solutions) with some integrations from Revit Architecture application.To be able to examine IES, we got access to a completed project from Bjerking. The project is a nursery school in Uppsala. An application has been handed in from Bjerking to make this project to a Green Building-certificated project. According to Bjerking own calculations (with the energy-calculation program Enorm), the consumption of energy of the nursery school is 48 percent lesser than required by BBR.An evaluation of IES and Enorm has been made with an aim to compare these two programs and find out if IES is an appropriate program to replace Enorm. Does Enorm or IES come up to BBR´s recommendations?The Degree Project cover 15 ECT, that required several adjusting and delimitations, and the study sketch ended with a literature study.After finishing the study sketch the modeling of the nursery school began.

Detta examensarbete ämnar besvara huruvida Tekla Structures kan fungera som ett lämpligt 3D-modelleringsprogram för konstruktionsgruppen Nyanläggning och Bro inom Grontmij Sverige. Med goda erfarenheter av Building Information Modeling, s.k. BIM, och 3D-modellering inom andra delar av Grontmij så fanns en önskan att optimera gruppens arbetsprocesser med den senaste kunskapen inom området. Arbetet har fokuserat på att praktiskt modellera en fallstudie baserat på ett av Grontmij tidigare genomfört anläggningsprojekt. För att säkerställa fallstudiens representativitet valdes en plattrambro med stor mängd armering som ansågs ha en komplex geometri vilket potentiellt skulle fördelaktigt kunna representeras i 3D.Vid skapandet av 3D-modellen och tillhörande ritningar delades processen in i tre steg; modellering, detaljering samt visualisering.

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

The sea-level is rising due to climate change. This report inquires into the possibleconsequences of sea-level rise in Värmdö and its archipelago with particular focus on roadsand buildings. Four scenarios with a sea-level rise of 0.5, 1.5, 2.5 meter and a worst casescenario of 3.9 meter are analyzed using a geographic information system (GIS) calledarcMap. The report also examines how Värmdö is taking into account future sea-level rise intheir planning today. The report´s findings show that uplift and sea-level rise cancel eachother out in the scenario with a sea-level rise of 0.5 meter, but that a number of more or lessimportant roads and buildings will be affected by a rise of 1.5 meters.

The availability of digital models of real 3D objects is becoming more and more important in many different applications (e-commerce, virtual visits etc). Very often the objects to be represented cannot be modeled by means of the classical 3D modeling tools because of the geometrical complexity or color texture. In these cases, devices for the automatic acquisition of the shape and the color of the objects (3D scanners or range scanners) have to be used. The scanner presented in this work, a Shape from silhouette scanner, is very cheap (it is based on the use of a simple digital camera and a turntable) and easy to use. While maintaining the camera on a tripod and the object on the turntable, the user acquires images with different rotation angles of the table.

This paper aims to shine a light on the challenges connected to the implementation of a process focused way of thinking in a public service organization. To this we have conducted a series of qualitative interviews, primarily from participants of a university driven project. The project aims to teach decision making employees of public service organizations how to use process modeling techniques to increase their efficiency. We have also interviewed the teachers who have taught the courses included in the project. As a final point of view we have also interviewed a researcher and IT consultants to compare novice users with experienced users of process modeling techniques.

When protection zones for wells are delineated, it is important to acquire good knowledge about possible travel time from different points in the catchment area to the well. Often, simple analytical methods are used for estimating travel times and the assumption is made that the hydraulic conductivity is relatively homogenous within the aquifer. Nevertheless, many aquifers are strongly heterogeneous which may lead to differences between estimates and actual travel times. As a part of the process to develop improved methods for delineating protection zones for groundwater supply wells, a tracer experiment was performed in a glaciofluvial esker formation in Järlåsa. On the basis of the experiment, a numerical flow model was created for the test site.The purpose of this master?s thesis was to apply the flow model to an aquifer where the hydraulic conductivity shows great variability and should be described by a stochastic distribution.

The landscape in the interior of Norrland has undergone dramatic changes since the deglaciation as a consequence of faultings, earthquakes and tilting of the landscape westwards. Archaeological investigations along former shorelines by the use of models of isostatic land uplift, have revealed many Mesolitic settlements in northern Sweden. Döudden, in the county of Arjeplog, has been investigated by archaeologists that identified settlements from 5200 BC. The objective of this study was to analyse the history of the vegetation and if the vegetation showed traces of human activity during early Holocene, by pollen analysis. The results indicate that the area had an established vegetation c.

Detta projekt gick ut på att under åtta veckor försöka utveckla en interaktiv tavla, där en karaktär i tavlan med hjälp av en monterad web- kamera skulle kunna interagera med tavlans åskådare. Rapporten handlar om hur man kan gå till väga för att skapa miljön till en sådan tavla, anpassad för realtidsspelgrafik.

BIM, Building information modeling, anses idag som det nästa stora arbetssättet som kommer revolutionera arbetet inom byggnads- och anläggningsbranschen. Det tros att BIM kommer förändra hela branschen med allt från entreprenörer och konsulter till statens beställare. Företagen i Sverige tar ett sort ansvar för att utveckla och implementera BIM som arbetsmetod då de idag ser vinsterna som kommer komma med BIM. För BIM är inte bara ett arbetsredskap eller en teknik utan det är en helt annan arbetsmetod som kommer leda till många fördelar. Denna rapport presenterar översiktligt vad BIM är för den som inte riktigt vet vad det innebär och hur nuläget ser ut idag i Sverige inom byggprojektering och även lite i övriga världen.