There have been, in some rare cases, difficulties with clamping of inserts with U-holesin their tool holder. According to the complaints, the inserts could not be properlyclamped or could fracture when clamped. A study has shown that variations inclamping behaviour are mainly depending by the position of the screw hole in the toolholder and the centering of the screw hole in the insert.The focus of this project has been the centering of screw hole in insert. It has beenshown that the screw holes are not always enough centered in the insert. Theproblem may occur after a certain step in the production, i.e.

The use of vision applications are growing and the demand for integration and connectivity with other industrial automation control devices is increasing. Some businesses that are using vision technology follow US Food and Drugs Administration (FDA) regulation concerning audit trail. This thesis investigates the possibility to use vision technology for counting objects, achieving connectivity and to follow FDAs audit trail regulation. A market survey has been used to select suitable hardware and software to be used in the design of an application that is able to count objects and that uses standard industrial network connection i.e. OPC data access and Microsoft?s .NET components over Ethernet.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Modern agriculture equipment are more computer based today, and many equipments use a terminal in the tractor where the driver have the opportunity to make adjustments to the equipment. This is the reason why ISO developed a new standard called ISOBUS. It is a communication standard based on CAN specially adapted for griculture equipments. The purpose of the standard is that it should be ossible to equip a tractor with a standard terminal called Virtual Terminal that can be used to control the equipment. The use of the terminal should be independent of the manufacturer of the tractor as well as of the equipment.The purpose of this report is to ?nd a solution of how to use CC Systems on-board computer, CCP XS, as a Virtual Terminal.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

The increase in sales of the so called smart phones has meant that there has also been a requirement to determine new applications for which they are suitable. One of the largest platforms for smart phones is Android and the task of this thesis is to develop an application for a company that wishes to create interactive radio for the Internet. In addition to ordinary radio features, the company would like the application to be able to present images and a small web page called Canvas. The overall aim ,of this thesis, is to build a fully functional media player that is compatible with the majority of the commonly used Android based mobile units. To fulfill the overall aim, nine explicit goals were targeted.

This thesis scrutinises the material on post World War II Swedish architecture produced by the Swedish Public diplomacy organisation "Svenska institutet" ("The Swedish Institute") during the period of 1945 through 1976. The outset is the dilemma encountered by every such organisation: how can the projected narrative of the own nation relate to as many countries as possible, without becoming too general? And how can the organisation address specific countries, without excluding others?By employing a two-sided model of interpreting the material, where it on the one hand is interpreted from the universal properties projected on the narrated architecture, and on the other hand from the particular ideological notions related to the same, the thesis suggests that the Swedish Institute continously relates the architecture to a West-European and American context by consistently connecting its universal properties to particular ideological notions orientated towards the West.The results underline the malleability in regard to ideological notions connected to modernist architecture. Earlier research in the Swedish context has focussed on how modernist architecture in Sweden, under the local tag "funktionalism", was established in regard to a Swedish audience as a particular Swedish architecture by relating it to a alleged continuos Swedish tradition, as well as to notions of a a progressive welfare state. By studying a similar material, though aimed towards a foreign audience, the thesis suggests that these allegations constitue an elucidatory example of how national and ideological narratives can form within the framework of technological-ideological dynamics of modernist architecture.

The engine of JAS 39 Gripen, RM12, has recently been equipped with a new flameholder and a new engine inlet. This change has caused an increased noise level from the engine when the afterburner is in use. The noise level reaches its peak when the afterburner is partially used. The problem is thought to be unstable combustion in the regions around the flameholder. A solution to the problem has been proposed by Volvo Aero.

The aim of this study was to describe peripheral vascular patients´experiences of quality of care in connection whith ambulatory care, and to identify if ambulatory treatment responded to patients´expectations..

This paper examines the ideological content of the compulsory school policy of the Swedish Liberal Party. The aim of the study is to investigate whether the Liberal Party does really represent a liberal policy for the compulsory school, or if it is more accurately described as conservative. The analysis is carried through by two separate critical examinations of the Liberal Party motion on school politics to the parliament and the Conservative Party motion on school politics to the parliament respectively. A comparison is then made between the ideological contents of the two documents. The specific party policies are linked to universal definitions of liberalism and conservatism with the help of an analytical tool consistent of a series of educational philosophies.

In many regulated rivers, authorities have stocked hatchery salmon to compensate for loss of wild populations. However, hatchery fish have not always behaved as wild fish do, and stocking them has not always fully compensated for the loss of wild fish. The purpose of this study was to compare swimming behaviour in the river before spawning, the choice of spawning areas and body size between wild and hatchery-reared salmon in the river Klarälven. Salmon behaviour in the river before spawning was analyzed using radio telemetry. The salmon were caught at Forshaga power plant, radio-tagged and returned to Klarälven at Ekshärad, 107 km from the river?s mouth.

Unit testing is a type of testing technique which is becoming quite fashionable to the developers and companies that are in the business of creating and managing software. Alas there are seldom any concrete data to support the positive claims of the authors in unit testing methodology books. These claims are instead based on empirical studies and the experience of the authors. The problem that arises from this situation is that it becomes problematic for managers and also the developers themselves to convince both customers and their own management to use this type of testing as there is no exact return of investment model. This essay examines this problem from two points, the first point is from the literature itself and interviews conducted with a number of developers at a software company located in Umea, Sweden.