Energy is an important issue in the current world which significantly affects sustainability and development. Energy generation and use are major sources of CO2 emissions which is one of the most important driving factors in global climate changes. The amount of energy used in house hold section can lead to estimation of the amount of CO2 emitted within this section which subsequently would be a ground to better management and maintaining a sustainable society. This study which is a bachelor?s project in sustainable energy, deals with estimation of CO2 emission from different types of residential houses in Sweden. An extensive literature review on energy use in Sweden by different residential sectors has been conducted.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.

Finnhamn is a group of islands that are located in the middle north part of Stockholm?s archipelagos. On the main island Stora Jolpan there is a camp called Sommargården, which consists of eleven different buildings in various sizes. The assignment given by the Archipelago foundation (Skärgårdsstiftelsen) is to analyze if it?s benefited to replace Sommargårdens current heating system that consists of electricity radiators, with a more energy efficient heating system. This research is done with help of the literature review and a visit to Finnhamn in order to map Sommargården?s current state and its energy usage.

AbstractThe future of ethanol is depending on good solutions for the production. ENA energy power plant produces electrical power and district heating by heating biofuel. By building an integrated bioenergy plant surplus steam could be used to produce ethanol as fuel to vehicle.This would mean that ethanol is produced renewable energy and the energy for the process derives from the surplus of power.  ENA energy, MDH (the University of Mälardalen) and the energy authority has initiated a research project were different bioenergy combinations integrate with existing power plant.  As a part of the project which size an integrated factory should be to gain the best efficiency for the plant was investigated. Consideration will be taken to the cost of the production in order to be competitive to the price of imported ethanol.  Etanolens framtid vilar på bra lösningar för framställning.  I ENA energi kraftverk i Enköping produceras el och fjärrvärme genom eldning av biobränsle.  Genom att bygga ett integrerat bioenergikraftverk där skulle man kunna använda överskottsånga till att framställa etanol som fordonsbränsle.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

The automotive market is currently undergoing a historical change where stricter emission legislations and ever increasing fuel costs have intensified the search for effective alternatives to the conventional internal combustion engine, which has resulted in a substantial trend towards electrification of powertrains. Storage of electrical energy is the fundamental component in this technology where the lithium-ion batteries are currently considered as the most appropriate solution. Lithium-ion batteries, however, as other types of batteries, can only be used efficiently and durably within a specific temperature range.This Master thesis has been carried out in collaboration with Electroengine in Sweden AB, situated in Uppsala, which has an ongoing project regarding development of a modular battery system for electric powertrains. The project is at a stage where an initial prototype has been developed which provides the foundation for this thesis. The study has addressed the battery system performance from a thermal perspective, in order to validate the ability of the system to create a thermally serviceable environment for the lithium-ion battery cells.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

During the last decades the housing sector has increased continuously, and housings and services accounted for 40 % of the energy usage in Sweden during 2011. The expansion in number of buildings in society has resulted in an increase in both energy usage and emissions of greenhouse gases. It is crucial to enable a sustainable development of society and as a result, the demand to reduce the emissions of carbon dioxide is a current question. In this study, the carbon dioxide emitted from the housing sector in Stockholm is estimated. The housing sector can be divided into different types of houses such as apartment blocks, single-family houses and holiday houses. By collecting information of the energy purchased in respective households, a computational model is generated that calculates the total emission of carbon dioxide.

Energy supply in Sweden year 2011 amounted to 577 TWh. The final energy consumption for industrial, residential and service was 379 TWh. Sweden has energy policy goals to reduce energy use in buildings. One of these goals is to reduce the energy use by 20 % in 2020 compared to the year 1995. An important step to achieve this goal is to target energy efficiency measures in existing buildings.

The moisture content in 10 deliveries of tree parts and 10 deliveries of wood residues were measured with different methods to analyze the quality of procedure used at Dåvamyran today. At the same time a survey was made on the measure procedures used at heating plants in Sweden The majority of the heating plants in Sweden use weight and moisture content as base for payment but at some plants only volume. The moisture content is usually estimated by drying wood chips in an oven but few plants a visual estimation is used. At few plants moisture content is estimated spectroscopicily. The techniques using near infra read light and other electromagnetic are still at a test stage. The methods of measurement used today are quit unreliable for the individual deliveries and there is a risk for systematic mistakes.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

In today?s society a large focus is put on energy systems and how our energy systems are built up. In order to make sure that we in the future still can enjoy the living standards that we are used to today, Sweden and EU have made a number of decisions on making our energy system more energy efficient and consequently reduce the usage of energy resources. By 2020 the European Union should have reduced its energy consumption by 20 % compared to 1990?s level, and by 2050, 50%.

Fast pyrolysis is a method for converting biomass into three energy rich products: char, gas and bio-oil, where the latter is most interesting.  Pyrolysis is an endothermic process where biomass is heated in an anaerobic environment and, with the right operating conditions, up to 80 %wt bio-oil can be extracted. Key parameters for fast pyrolysis are: stable reactor temperature (~500°C), short residue time for gas in the reactor (<2 s) and a very high heating rate for the biomass. Today there are several different process solutions for fast pyrolysis, where fluidized beds and rotating cones are most developed. Bio-oil has compared to fossil oil: lower heating value, low pH and also polymerizes with time. Because of this upgrading is desirable for increasing competitiveness.

This study will identify the environmental impact in terms of carbon dioxide for a boiler house on behalf of Kvänum energi. The boiler central consists of a main building, which in turn contains multiple components such as boilers, pipes, etc, the boiler central uses pellets fuel. It also includes a silo and an ash container. The total weight of the boiler is about 63 tons. Each boiler has an output of 600 kW; the central includes three boilers with room for a fourth if necessary.