A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

AimThe aim of this study was to map the injury panorama of traumatic injuries related to ice hockey in Sweden 2006-2011. In addition to that the aim was to compare whether there were any gender differences regarding traumatic ice hockey injuries. MethodThe present study was based on data from the Folksam insurance company between 2006 and 2011. The population consisted of ice hockey players in a club affiliated to the Swedish Ice Hockey Federation and that had sustained a traumatic injury related to ice hockey that resulted in medical care and then was reported to Folksam. The results are presented with descriptive statistics such as mean and standard deviation, median range and frequencies. ResultsThe head was the most common injury localization followed by the upper extremity where the shoulder accounted for a high number of injuries. Fracture was the most common type of injury for both male and female players.

Many organizations utilize decision support systems in order to handle different tasks and tosupport the decision-making process. Decision support system is a broad term used to referto several different types of systems. These types of systems can handle a wide range ofoperations within the organization. Consequently this will have an impact on differentoperations within the organization. The main aim of this study was to create a betterunderstanding regarding the impact of decision support systems on the various operationswithin the City Council's procurement units which in turn will increase effectiveness.

This report is a documentation of a Master?s thesis of 20 credits performed at the educational program of Technical Product- and Production Development with Design at Halmstad University. The project is carried out in cooperation with Hafa AB in Halmstad.The purpose of this project was to bring forth a concept of a bathroom cabinet for Hafa?s new selection Young through creative design methods. The selection is supposed to attract the younger purchaser but also a target group that dare to experiment with home furnishing and appreciates new design.

To design new and high tech products the engineers rely more and more on computer based simulations to investigate the properties and behavior for a component or system.To verify these computer based simulations the dynamic properties for the components of the drivetrain needs to be verified. Therefore measurements of the stiffness and vibrations for the rear axle has been performed. This report show how the measurements has been implemented and evaluated, along with some interesting results for the rear axles properties.The static stiffness for the drive shaft along with the axle-gear has been determined. It is found that the stiffness for the whole rear axle is near the stiffness for the drive shaft, which means that the drive shaft becomes the dominant component of the system and affects the rear axle stiffness the most. The measured stiffness of the driveshaft is close to its theoretical stiffness.The stiffness for solely the hypoid-gear have been calculated using the stiffness for the rear axle and driveshaft, and thus has a range for the stiffness of the hypoid gear been determined.The backlash for the whole rear axle and for some individual components has been determined, where the backlash between pinion and crown-wheel has negligible impact on the total backlash.Measurements of the crown-wheel and pinion movements have been conducted, where the direction of movement is consistent with the theoretical direction of the forces.The vibration measurements show that the vibrations are more severe at certain rotational speeds.

This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

This final project discusses renewal and upgrading of the area of Prim. It is discussed how this industrial area can be an attractive neighborhood with a varied range of services and commercial trade. Prim is located 2km north-east of the center of Barcelona. The area boarders to a deep railway valley that historically has separated Prim from its neighboring districts. At present there is almost no housing, services or commercial trade within the area and the industry is discontinued or the existing industrial buildings are derelict. There is also a lack of green recreational areas.

Stockholm is considered as a tourist destination which has a lot of offers to attract tourists and if it utilizes it water better it can give a wonderful and unique experiences and cold baths may become an image to it.The aim of this study is to shed light on the open-air swimming-baths and shores of Stockholm. Also how to use this advantage as it?s a city based on many islands, the purest water in Europe and this makes Stockholm as a destination a very attractive place for tourism. For a better understanding of our study, we have studied the quality and quantity to see how people began to exploit open-air swimming-baths throughout history everywhere in Europe and specifically of Stockholm city sea shore. We did a study on the history traditions of open-air swimming-baths and how it can be a tourist attraction through books and interviews, scientific articles and our personal observation, so that we can analyze how to develop sustainable tourism in the future and how Stockholm city can make development of opportunities for the future.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

The objective of this study was to uncover what aspects of urban plazas and parks that are most important for users? evaluations of places? aesthetics and microclimate (the characteristic climate for a limited space). This was done by investigating people?s general ideas of plazas and parks (the prototypical concepts) and compare these with place users? descriptions of four specific places. Interviews with two groups (31 and 24 persons respectively) were carried out in order to collect this information.

Projektet behandlar utvecklingen av ett handledsskydd anpassat för snowboardåkare. Den primära målsättningen är att med hjälp av optimerad design för komfort och användarvänlighet kunna erbjuda ett högkvalitativt och funktionellt skydd. Det senare uppnås med hjälp av material som med hänsyn till skadebilden hos utövarna här anses vara den bästa lösningen. Val av material gjordes efter en ingående litteraturstudie över handledsskyddets funktion och mekanismerna bakom handledsskador. Studien, i kombination med en rad andra metoder för informationsinhämtning, låg även till grund för designprocessen och den slutgiltiga produkten. Lösningar på befintliga problem hos existerande handledsskydd har applicerats på slutprodukten. Användarvänlighet och passform har tillgodosetts genom att frångå det traditionella systemet med kardborrelås, till produktanpassning av ett etablerat snörsystem.

This essay concerns the osteological cremated skeletal remains from Broe, Halla parish, Gotland of  The Late Iron Age.The focus of this essay is to determine the position of the corpse on the pyre, whether the cremated bones were crushed after or prior to the cremation and if the individual was buried in the pyre. In addition the species, age, sex and skeletal abnormalities of the bones in question will be studied.The result of the research has yielded that the cremated bones did not need to be crushed to result in the small fragment sizes. Crushing of the bones may have happened during the cremation, this conclusion has been drawn through the comparison of a pyre experiment were bone fragmentation is evident with cremated foxes, and dogs in the cremation graves from Broe. The construction of the pyre and the position of the corpse could not be determined through colouring and fragmentation of the bones.The human's were commonly buried in the pyre, and in some cases it is possible that the "grave" in fact is the remainder of a pyre. The species found are dog, horse, cow, sheep/goat and bear.

The Swedish consumption of lamb a increasing, and today we yearly eat a kilo of lamb per person each year. As a consequence the Swedish degree of self production according to lamb is steadily decreasing, and is today about 39 %.Today Swedish Meats is now cooperating with the Swedish lamb breeders organisation to raise that percentage. At the same time the European Union presents a new agricultural reform, the MTR (Mid Term Review). The shape of this new reform is not yet fully known, but the general policy has been more or less outlined. The new reform is split into three propositions: the farm model, the regional model and the mixed model.