The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .

In today?s competitive market, design is an important element for the companies. They must succeed with delivering an increased value and an experience for the consumer to be able to survive. The Swedish company?s have become better in the design area, the higher standards the consumer?s demands forces the company to invest more in design.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design, 22,5 hp, 2014.

This diploma work was conducted in collaboration with the Swedish civil engineeringconstruction company Skanska Construction in Stockholm. Their interest is todevelop a number of type approved form constructions which can be used during theconstruction of concrete walls. Skanska focuses on improving safety on their projectsand both supervisors and workers have a need for approved form constructions inthe current situation.The study is focused on safety and the purpose is to facilitate the preparation beforethe form work can begin. By studying the literature of the subject and conductinterviews with employees at Skanska Construction, the understanding of the issueand knowledge will be increased.Literature studies, interviews together with production and design have been thebasis for a successful study. The work has resulted in three types of approved formconstructions to Skanska Construction and the drawings can be used of employees atthe company.

Free Space Optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. The main issue is that severe weather can have a detrimental impact on the performance, which may result in an inadequate availability. This report contains a feasibility study for an all-optical free-space link intended for short-range communication (200-500 m). Laboratory tests have been performed to evaluate the link design. Field tests were made to investigate availability and error performance under the influence of different weather conditions.

Title: The internal attractiveness of the sales position within ABB SwedenProblem: What is the cause of the low internal applicants for the sales position at ABB?Purpose: To identify why there are so few internal applicants for the sales position at ABB.Method: In order to achieve the purpose of the study, a survey was conducted amongst the employees of ABB. The target groups were sales managers, sellers and other employees. The result from the survey where then analyzed based on the theory chapter. Conclusion: A GAP-analysis showed a difference in the attitude towards the sales position at ABB.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The high feeding value of red clover makes it into an important species in Swedish agriculture. There are three different maturity types grown in Sweden, early, medium late and late. The time for heading, regrowth and winter hardiness is affected by the maturity type, but there can also be other factors that are affected by the maturity type, for instance fiber content. In a greenhouse experiment three red clover varieties of different maturity types were compared; early Titus, middle late SW Nancy and late SW Torun. The features compared were fiber content and differences in development rates.

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

Detta examensarbete är en undersökning i kommunikation genom konst och design.Det är ett gränsöverskridande samarbetsprojekt vars syfte är att skapa en diskussion kring ett fortfarande tabubelagt ämne. Genom ett gestaltande arbete i textila material undersöks hur vi på ett kreativt sätt kan bidra till samhällsdebatten runt övervikt och fetma. Projektet resulterade i två textila verk som gestaltar den nya svenska kroppen. En textil skulptur i form av en överviktig dalahäst och en folkdräkt för den nya svenska kroppen. I vår gestaltning använder vi oss av dalahästen och folkdräkten som symboler för svensken.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

This report is about the current outdoor environment in the housing area Brunnsbacken in the city of Eskilstuna. The report examines the various factors in the outdoor environment that can affect the physical and psychic well being of the elderly people through availability and inclusion. The research methods that are affected are qualitative and has been implemented in order to give insight and knowledge about the way elderly people view the outdoor stay in their neighborhood, but also through analysis produce an informed design suggestion..

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

The mission was to create a prototype of a menu system for the companySystem Andersson AB. The instructions were that it has to be as interesting andmodern now as in 20 years. We had to look at technology from the cutting edgeof development to make our prototype survive in the future. WindowsPresentation Foundation (WPF) was the technique we focused on. There areonly a few applications that take advantage of WPF today, but it is predictedthat WPF will be the next generation method for developing applications to theWindows platform.To make our menu visually appealing, easy to use and at the same timefunctional, we followed the clear path and guidelines that are available ininteraction design.

Det finns idag behov till en undervisningsform som på ett roligt och enkelt sätt engagerar studenter till att lära sig om design. Studenter är olika och behöver olika undervisningsformer.Problemet löses via ett brädspel som är kunskapsgivande vilket får studenter engagerade. Under tio veckor har jag arbetat med ett testbrädspel för designstudenter som ett komplement till designundervisningen. Jag har intervjuat folk om design och skaffat mig kunskaper om hur en yrkesverksam designers tillvaro kan se ut. Tester av spelet har ägts rum för att se om det är underhållande och hjälp har tagits av yrkesverksamma brädspelsutvecklare och lärare för speldesign.Resultatet blev ett koncept till ett brädspel där det går att rulla ihop planen i en papperscylinder eller vika planen till en låda för att lösa förpackningsproblemet.