This thesis seeks to investigate the relationship between municipal policy for housing supply and the planning of new housing in Sweden. Through a case study of Göteborg municipality and a comparative content analysis of Göteborgs policy for housing supply and a number of plans featuring housing the analysis seeks to investigate the effect of policy for housing supply as a tool for securing the demand for housing in the Swedish municipalities. The thesis also seeks to discuss its findings using theory concerning the implementation of policy and the general planning situation for Swedish municipalities today. The result of the analysis shows that most plans fail to regulate most of the content suggested in the policy for housing supply, particularly regarding aspects such as pricing, type of housing and type of ownership. The result also points towards a relationship regarding the prevalence of municipal land contracts and compatibility to policy for housing supply as well as a connection between how extensive the plans are in their proposed land use and their compatibility with policy for housing supply. Using theories of policy implementation and the municipal planning situation, possible explanations for the findings of the analysis could be a split in responsibility between the formulating and implementation of the policy for housing supply and its contents, a lack of resources of means for implementing or the prevalence of special interests when attempting to convert policy to plans..

There is an awareness of the importance of gender equality in most western societies, both at the political level and in everyday life. In academia, for instance, gender is nowadays a scientific field which indicates that there is a lot of knowledge about the subject. What we do not have much knowledge about is whether gender knowledge leads to changes in gender relations in practice. The aim of this study is to explore how gender scholars relate to using ? practicing ? gender knowledge.

A new type of chartered holiday, fitness holiday, has evolved during the last years and has also been mentioned in different media channels. Despite this, fitness holiday is a relatively new and unexplored phenomenon, which caught our interest to further explore this. The desire to travel on a holiday of this type has also increased. Therefore, a study about this particular phenomenon with focus on the traveler?s motives behind the choice to go has been done.It?s a qualitative study and most part of the data has been collected during a field study to Playitas Resort, Canary Islands.

Bakgrund: Förutom de diagnostiska fördelarna med jodkontrastmedel finns det samtidigt risker. Nedsatt njurfunktion, diabetes och hjärtsvikt är några av de riskfaktorer som kan leda till att patienten drabbas av en kontrastmedelsinducerad njurskada. Allergi och astma utgör riskfaktorer för en akut överkänslighetsreaktion. Tyreoideafunktion, graviditet och läkemedel är andra faktorer som är viktigt att ta reda på för att undvika negativa effekter av jodkontrastmedel. I Sverige finns nationella rekommendationer samt utarbetade frågeformulär som ska förebygga de negativa effekterna.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

In this study a case study was conducted at the Transport Agency. The government agency is seeking better alternatives to its current ways of keeping track of important dates stated in legal documents. The agency wants to explore the possibility for an IT-solution for keeping track on those dates. In the case study change analysis was conducted on the vehicle type approval process. Qualitative interviews were conducted with a section manager, vehicle type and component approvers, and with a system administrator and a system manager at the Transport Agency in Borlänge.

Swedish forests are dominated by just two conifer species Norway spruce and Scotch pine. They are not able to achieve the highest possible production or fulfill industry demands for raw materials. The introduction of exotic conifers can potentially meet these shortcomings and present a relevant solution. This study was conducted in a block experiment with ten blocks planted in 1987 by SCA in North Sweden. The objective of the block experiment was to study if Black spruce is an appropriate alternative to Lodgepole pine, Norway spruce and Scotch pine on different site classes.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

The choice of harvest date for leys is one of the most important factors affecting the size and quality of the harvest. An early harvest gives a high nutritive value while a late harvest gives larger quantity. Today?s aim to produce high nutritive leys gives early harvest dates both in primary growth and regrowth in northern part of Sweden. The consequence is a growth in the autumn, a "third harvest".The aim of this master thesis was to study the effects of different harvesting systems and their effect on size, feed quality, wintering and economy for conditions in the northern part of Sweden.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.

Unit testing is a type of testing technique which is becoming quite fashionable to the developers and companies that are in the business of creating and managing software. Alas there are seldom any concrete data to support the positive claims of the authors in unit testing methodology books. These claims are instead based on empirical studies and the experience of the authors. The problem that arises from this situation is that it becomes problematic for managers and also the developers themselves to convince both customers and their own management to use this type of testing as there is no exact return of investment model. This essay examines this problem from two points, the first point is from the literature itself and interviews conducted with a number of developers at a software company located in Umea, Sweden.

Large amounts of birch-timber are imported to Sweden, from particularly the Baltic States, since the domestic production can?t support the pulp industry. The goal of this study was to show the potential of birch and the area?s most suitable for birch production. The study was limited to Gävleborg County. Using site characteristics, site index (SI) for birch was estimated on all National Forest Inventory plots in Gävleborg County.

Root rot is a big hurter and a huge economic problem for the Swedish and European forestry. The severest hurter is Heterobasidion annosum (Fr.) Bref and it occurs as two different species in Sweden. Commonly referred to as the P-type (Heterobasidion annosum s.s. (Fr.) Bref.) and the S-type (Heterobasidion parviporum Niemelä & Korhonen). Therefore a lot of research has been carried out in this topic to find a solution and reduce this problem, one alternative that have shown to be profitable is stump treatment in thinnings.