This study was an assignment for the company Holmen which is located in the region of Örnsköldsvik, Sweden. The study was focusing on the responsibilities of a forestry planner during the planning season. The study was investigating about how much time the planner spent in the office, in the car and out in the forest. Any other issues that would cause delays were also identified. To be more effective and to increase the number of objects to a district bank, a better preparation in the planning stage (for thinning?s or clear cuts) is needed as well as faster transition on to the next area.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

In almost every workplace today IT-systems have strong and significant roll in theeveryday work. It is therefore important that the systems have a good functionalityand that they work as an aid for the users. This thesis aims to study the systems atthe company Telge Nät and to analyse them from a usability perspective. By using thisperspective it has been obvious how difficult it is to make improvements on usability,once the system is in place. Even other larger improvements of the systems aredifficult to make at this stage and this is something that the users are aware of.

My purpose with this thesis has been to find out how to choreograph a fight sequence in ananimated movie. With the help of professional stuntmen and dancers, I have tried to findmethods and techniques used on stage and in live-action film and apply those to animatedfilms. To successfully identify the techniques used, I conducted a number of interviews andanalyzed literature that deals with the subject of fight choreography. By the analysis of themethods provided by the choreographers and selected parts of the literature, I have compiled anumber of steps I recommend 3D animators should to take in their efforts to create their ownfight choreography..

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Evaluations of open Ditch status and function, with an assessment of suitability of a conversion to a two stage ditch as a low maintenance alternative. To illustrate Swedish drainage problems this work focused on two agricultural drainage associations assessed in detail with a new method called MADRAS (Minnesota Agricultural Ditch Reach Assessment for Stability). With the assessment of the MADRAS method estimates were made to conclude the ditches operating problems. This was made through measurements of sediment depths, mass bank failures etc. in order to quantify ditch problems and propose practical actions for improved ditch stability and water quality. The MADRAS surveys were conducted in two main ditches that drains 2900 hectares of land on the northern shores of Mälaren. In the study measurements of the ditch cross-sections were also conducted to compare actual profiles with the original map profiles. The evaluation showed that parts of the studied ditch sections were operatively poor; main reason was mass bank failure, undercut channel banks, sediment aggregations and narrowed ditches. The profile survey shows that a majority of the profiles 80 % has sediment accumulations there remains only 64 % of the original profile from the map.

This study was made to compare and distinguish any differences in olfactory recognition and host plant adaptation between two strains of cotton leaf worm, Spodoptera littoralis. The populations used were established in Egypt and Benin, Africa. The documentation consisted of information about (1) each of the strains development through the larval stage up to pupation on diets of cotton, clover and cowpea. (2) Their oviposition preferences as adults between cotton, clover, cowpea, maize and cabbage. (3) Electroantennographic recordings to quantify any possible responses to plant volatiles. Throughout the diet experiments the larvae from the Benin strain showed significantly a better development between artificial, clover, cowpea and cotton respectively, while the Egypt strain had significance between artificial, cotton and cowpea/clover as diet. Also noted was how the strains substantial development of weight differentiated if fed the cotton diet, followed by the cowpea diet showing that the Benin strain would develop a higher body mass on a cotton diet as well as on a cowpea diet. This trend was however switched once the pupal stage was reached, where the Egyptian strain contained a significantly greater body mass than the Benin strain on the artificial and the Benin strain a greater on cowpea, which suggests that in the end, the Benin strain develops significantly better on cowpea while the Egypt strain develops better on an artificial diet. During the oviposition experiment that both stains showed a clear difference in hierarchy of host plants considered suitable for oviposition, where the Egyptian strain is significantly more attracted to clover than the Benin strain. Also showed with electroantennographic recordings and significant values was the higher sensitivity the Egypt strain had towards (E)2-hexenal, (E/Z)-b-ocimene, (Z)-3-hexenyl acetate, Nonanal, (-)-linalool and ?-myrcene when compared to the responses from the Benin strain..

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

Läpp-, käk och gomspalt (LKG) kan medföra svårigheter med tal, artikulation och röst. Enligt tidigare forskning har vuxna individer behandlade för LKG liknande förekomst av röstavvikelser som kontrollpersoner utan spalt. Syftet med denna studie var att undersöka grad av röstavvikelser hos vuxna patienter behandlade för enkelsidig LKG och kartlägga eventuella samband mellan röstavvikelser och kirurgiska metoder för gomslutning, kön och operation med eller utan svalglambå samt jämföra röstresultat med data från individer utan LKG. Sjuttio patienter behandlade för enkelsidig genomgående LKG deltog i studien, varav 45 patienter hade opererats med gomslutning i en seans och 25 patienter hade opererats i två seanser. Elva av patienterna i patientgruppen hade genomgått svalglambåoperation.

I work on a lighting design for a dance performance to be on tour. A lighting design adapted for three different conditions was made: - One comprehensive where I allow myself a great deal of creative freedom, adapted for the stages with major technical conditions. - One smaller version for stages with less equipment and with less time for preparation on site. - One design for very simple conditions. I also examine the specific differences between typical theatrical lighting design and typical dance lighting design, and the best way to prepare for the hands-on stage design phase..

Rotskärsskolan is located in Skutskär, Älvkarleby municipality and the school conducted today consists of lower secondary. The school was built in the early 1960s and contains three buildings. Today there is a great need for reconstruction of Rotskärsskolan, when the premises are worn out and not suitable for today's education. It must therefore be a phased change involving all the school buildings, starting in the winter of 2008/2009.Our degree project involves one of these buildings, called house F. This building will, by a recent decision, be adjusted for classes from preschool up to grade five, special school and leisure activities when some of the municipality's schools will consolidate.

Denna uppsats syftar till att studera hur könslönegapet, med kontroll för sedvanliga humankapitalvariabler samt sektortillhörighet, påverkas av matchningsprocessen på den svenska arbetsmarknaden. Detta har gjorts med hjälp av linjär regression och metoden minstakvadratskattningen, även kallad OLS (ordinary least squares). Den data som ligger till grund för undersökningen är tvärsnittsdata från Levnadsnivåundersökningen år 2010. Det teoretiska ramverk som studien tar avstamp i är den klassiska humankapitalteorin vars antagande är att utbildning är en investering för individen som höjer dennes produktivitet och därigenom leder till en högre framtida lön. Dock har tidigare forskning visat att utbildningens avkastning står i relation till arbetets utbildningskrav, där en överutbildad person får avsevärt lägre avkastning för de år som dennes utbildning överskrider arbetskravet i jämförelse med en rätt matchad person.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.