Our bachelor thesis is a visualisation made in 3D-graphics of how the horserace track in Tingsryd perhaps will look like in the future, complete with a miletrack, steeplechase, and other horserace courses. Today, the race track is only in it?s building phase. The inner field-group in Tingsryd needed presentation material to show their eventual sponsors, so they contacted us at Media Technology, and we instantly decided to give their idea a try..

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

Scania is constantly trying to improve their product development process, the PD-process.The company, along with others, is optimizing their development process in order to gainadvantage in terms of shorter lead times and larger market shares. For this to happen, a wellorganized process is required.The PD-process is divided into three different phases that are linked together by a hand-overprocedure. Scania Bus has experienced problems that stem from a lack of hand-over routines,and as a result the product development process has been slowed down. This has a number ofconsequences, one of them being the complication of new project initiations.The main purpose of this master thesis was to review the hand-over procedure. Within thestudy the project directive was also to be examined, and a recommendation of how the start ofa new project could be made easier was included.To begin with, a detailed literature study was conducted with the intention of obtaining thebasic theoretical knowledge needed for this study.

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.

WPF is a newly introduced graphical system that is a part of Microsoft?s .NET Framework. This report will evaluate WPF and its features. A comparison is made mainly towards the previous version of .NET which is .NET 2.0. The work is partly theoretical and partly implementational.

It is estimated that 22 000 contaminated areas exist in Sweden today. In order to classify the risk of contaminant migration from these areas and to prioritize which of these contaminated areas should first be treated, the Swedish Environmental Protection Agency (EPA) has designed a method, for the investigation of contaminated areas (MIFO). One of these contaminated areas is the landfill Gräsötippen outside Köping. The landfill has been used by both Yara AB and the Köping municipality between the years 1945 and 1975, and both industrial and household waste have been deposited there. The aim of this report is to survey which contaminants that can be found in the soil and water in the landfill Gräsötippen and to evaluate the migration of these contaminants.

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders.

Chemical substances are spread diffusely and uncontrollably as a result of the increased consumption of goods. REVAQ is a certification system that works to reduce the flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

The technological legacy from the early electrification of the Swedish railroads has resulted in a power grid with a lower grid frequency than the national power grid from which it is fed. Energy transfer between these power grids with different frequencies requires substations, adapting the grid frequency for the rail road power grid. For this purpose, a feeding power grid has been built, stretching across the country from Boden in the north to Tälle/Häggvik in the south.Power transfer in the Swedish power grid results in voltage angle differences which increase with increasing loads and transfer distance. These voltage angle differences are transferred from the power feeding substations to the rail road power grid, will in some extent cause loss of energy due to unwanted power flows from north to south.To minimize the losses due to this phenomenon, a power management system called EFS 132 kV has been developed and implemented. The system minimizes the unwanted power flows and controls the desired power flow for a good distribution of loads between the power feeding substations.This thesis investigates the extent of the transmission losses avoided due to the EFS 132 kV that coordinates the idling angles to a common reference point.The results indicate that EFS 132 kV affects the power flow, especially between the northern substations through an improved load distribution.

This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The problem of separating a non-rectangular foreground image from a background image is a classical problem in image processing and analysis, known as matting or keying. A common example is a film frame where an actor is extracted from the background to later be placed on a different background. Compositing of these objects against a new background is one of the most common operations in the creation of visual effects. When the original background is of non-constant color the matting becomes an under determined problem, for which a unique solution cannot be found. This thesis describes a framework for computing mattes from images with backgrounds of non-constant color, using Bayesian statistics.