This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

This degree project includes both a theoretic component and a practical component within the graphicprofiling domain. Literature on graphic design has been studied for the theoretical part and the achievedknowledge has been used for the practical part. The project has been to produce graphic materialfor ?Rookiefestivalen? in Hultsfred.In modern society it is important for a corporation to distinguish itself from others by using a graphicprofile. Through using a graphic profile the company can have an affect on how it is perceived byothers.

The connection between fluorescence and color management still is a relatively unexplored area. Thefollowing composition analyses the theory that when printing on fluorescent ink jet paper using ICCprofilesa more yellow print will appear. In theory the ICC-profile compensate for blue light that fluorescefrom the paper with the complementary color, yellow. The human eye apprehands this fluorescentlight as white.When categorizing a number of ink jet qualities some tests to indicate change of color in the final printwere made. Five qualities were chosen for further analyses, each with different white point.

Using a qualitative research method to get the empiricism for analysis, we have analyzed advisors and job seekers experience of management meetings at the job center in Halmstad. We used a semi-structured interview form when we collected the empiricism from four advisors, four job seekers and one complementary actor in the form of a job coach, with a hermeneutic approach to interpreting the informants? subjective experience. We also chose to analyze our results using theories by Asplund, Von Wright, Mead, Scheff, Barth and MalténsThe results presented have shown that time is what they all described as lacking. It was found that the job seekers had a reasonable degree of common experience in both the management meetings and the working role of the advisors, while the advisors themselves were divided on how their role would be applied.

We investigate the effects of various types of word-of-mouth (WOM) messages on consumer bahavior. The message is varied along two dimensions where one is valence and the other is whether or not it contains an explicit call for certain behavior or attitude change. We use an experiment in the form of a web-based survey. Five different scenarios were designed to represent neutral, positive, and negative WOM. The latter two came in two different versions - one with a recommendation and one without.

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

AbstractThe purpose of our study is to reach an understanding of the situation of unaccompanied refugee minors in school. Thus the study aims to investigate what sort of possibilities and limits they encounter when going through their school education. We have chosen a qualitative method and conducted interviews with four persons between the ages of 18 and 21 years.The result of the study shows that unaccompanied refugee minors experience numerous limitations and lesser possibilities than other students, which prevents their educational and social development. The limitations partly depend on the school personnels lack of knowledge about this target group, and partly on the difficulty of dealing with a new culture which is different from the students original culture.  An important conclusion that our study has shown is that the educational system has a great impact on how well the students manage to function in the new society later on.  Therefore it is of great importance that the teachers have access to competence development , since this is of substantial importance for the  unaccompanied refugee minors development and socialization. .

Värmekollektor in Sunne is a company whose main occupation is to collect the gas produced inlandfills. The gas contains about 50 % of Methane which is a greenhouse gas 20 times worse than CO2and should therefore not be allowed to leak into the atmosphere. The Methane is in as large amount aspossible used in different plants for example heating of households. But there are occasions when aflare is needed to burn the excess gas at standstills or testing of new landfills. The Flare only burns themethane to reduce the hazarder?s effect of the environment, it does not take advantage of the energy inthe gasThe goal of this master thesis was for me to create a foundation for an in-house production offlares for Värmekollektor.

AbstractCommunication and information has become a large industry in today?s society. More and more organisations use these means as tools of influence. Non-profit organization?s campaigns, which aim to change a behavior, often have a political responsibility and it is therefore important that these are carefully planned and carried through.

AssiDomän Frövi board mill has in cooperation with students from Graphic Technologyat the University of Dalarna a degree project that involves developing package solutionsin carton material from AssiDomän Frövi. This year the basic condition was to use theweights 270g/m2, 300g/m2 and 330g/m2 and choose between Frövi Bright, Frövi Lightand Frövi Carry.The packages were supposed to be in the segments industrial products,chocolate/sweets and beauty products/cosmetics. Two packages were produced in thesegments industrial products and beauty products/cosmetics.The first package, produced in the industrial segment, contains textile color and templatesand the second package is a gift package and contains nail polish.The investigation part of the project deals with how the packages today are fit forrheumatics in opening purpose..

This is a study of why Japanese comics, so-called manga, in such a high degree make Swedish readers eager to write and draw comics themselves, and what didactic implications this might have for teachers working in Sweden. To answer this, the author has put together a focus group of Swedish artists influenced by manga, and also used a questionnaire at two Swedish art schools, where young artists are taught how to draw in a manga style. The results show that it is the compelling storytelling and the focus on the characters that enthral readers about Japanese comics, but that it is the seemingly simple style that makes the readers think they themselves can master it. The fact that the interest in both reading and creating manga, almost completely overlap with the so-called period of oppression (between the ages of 11 and 14) when most students lose interest in creating art, is something that could and should be used in the Swedish educational system..

Engineers are a group of individuals who are attractive when companies are in need for competence in technology. Today it is a shortage of these competences in the labor market. Because of this there has grown a competition among companies when they strive to recruit the best engineers. Therefore companies spend more resources on marketing themselves as an attractive employer. This study was set out to find what engineers think is an attractive employer through a demographic perspective.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Oral intake of green tea and its effect on the appearance of UV-induced erythema, erythema solare ? A systematic literature reviewAuthors: Ernita Antoni Mulliqi and Pernilla GustafssonSupervisor: Sofia KlingbergExaminer: Ingrid LarssonProgramme: Dietetics programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: April 10, 2013Background: UV irradiation of the skin can cause erythema, clinically called erythema solare. The condition can exert pain as well as discomfort and may in the long term lead to negative effects including skin cancer. Green tea contains catechins which are substances with anti-inflammatory effect that may have positive effects on the skin. The intake of green tea is believed to have a protective effect against UV irradiation, since green tea extracts in lotions in previous studies have shown to increase the skin tolerance level against UV irradiation.Objective: To examine the scientific basis and determine whether an oral intake of green tea has a protective effect against UV-induced erythema.Search strategy: Searches in the scientific databases PubMed and Scopus were made to find suitable articles.

A degree thesis about quality control and assurance in construction. Made in cooperation with Wästbygg. An analysis was made of the self-monitoring control that is conducted during the construction. The data was collected from interviews from personnel employed by Wäsbygg as either work-leader, project-manager or quality- and environmental-coordinator. During the study there was also a review of the literature in the subject.

A woman is dying of cancer, she refuses to use her walking aid. Because she is embarrassed. This means she can?t leave her house, and her last days become very limited.Why do we act like this?Can the view we have of products adapted for disabled be changed by working with colour, texture, form and materials?There are many products adapted for disabled, the products often have a good function and well developed ergonomic aspects but the visual aspect leaves a lot to wish for. There is neither effort nor money put in to the exterior design of most of these products.A lot of the solutions that are invented for adapted products can be used in design of ?regular? products.Why should we then divide products in to adapted and non-adapted.