Issue of study: The development of technology and society is closely linked. Mutual dependency and complex interrelationships make straightforward analysis of issues regarding the future of technology and society hard to perform. Therefore, the study addresses the question of how organizations should describe and analyze the interactions of technology and society in order to gain a better understanding of what the future may bring. Purpose: ? To develop a method for analysis of the future course of issues regarding technology and society in interaction.? To apply and test the developed method through a case study, where it is used to analyze the future of the Russian fuel market.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.

Syftet med detta examensarbete är att sammanställa maskinkostnader för etableringsmetoderna plöjningsfritt och konventionellt. Vi vill även titta på hur stor kapacitet som behövs på maskinparken för den tänkta gården på 600 ha åker, detta för att hinna etablera grödan inom ett rimligt tidsspektra. Anledningen till att vi valt ett företag på 600 ha är att det är den areal tröskan klarar av att avverka inom rimlig tid. Det medför att vi måste ta en del hänsyn till lägligheten och hur mycket av tiden som är så kallat ?tjänligt väder?.

Storage of biomass is associated with problems like heat development, biomasslosses, and reduction of the fuel quality. Certain processes such as biological- andchemical degradation are responsible for these storage problems. This master?sthesis was carried out at Vattenfall Research and Development AB and is alignedtowards quantifying the biomass losses from short-term storage (1-2 months) ofbark and recovered wood. The biomass was stored in outdoor piles during differentseasons, campaign 1 (summer) and campaign 2 (autumn).

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

The transportation sector is the only sector of the Swedish society that is still increasing the emissions of carbon dioxide and other green house gases. Diesel fuel represents one of the fuels that contributes to these emissions and the use of diesel fuels is increasing every year. The main purpose of this study was to make an estimation of the current business situation for producers of liquid diesel biofuels in Sweden such as biodiesel, synthetic diesel and crude tall diesel and examine the forces of competition of the industry today and its future prospects. The study revealed that the rivalry among the existing firms was low mainly due to the geographical spread of the companies. Moreover the success of the biodiesel industry was influenced by a long-term guarantee of the tax exempt for biofuels and by the price level of petroleum diesel.

Car usage is determined by several facts, e.g. living conditions determined by geographical matters. There is a political will to control car usage with different kinds of incentives since car usage generates environmental problems. This essay analyses the differences between car usage in urban areas as opposed to thinly populated areas in Sweden and their significance on governmental incentives. By using statistics differences in car ownership during ten years between thinly populated areas, areas in the countryside and urban areas is studied.

This is a graduation project in Innovation Management, which seeks to enlighten new theories within the major subject ? the multi?faceted innovation process.The reader is hereby invited to an insight in the more complex perspectives of these types of theories than what has previously been explained in simplified ways.We have conducted research on a company within the cleantech market; Cellkraft AB. The company develops and produces fuel cells amongst other products, which have emerged during their research and development in the fuel cell technology. Cellkraft works in a high?tech frontline market where innovation is key.

The cost for forestry logistics in Sweden is about 25 percent of the total cost of getting the raw material to industry (Anon., 2010). There might be much to gain by taking a look at your supply chains on the logistic side in your company. In this report the logistic chains by Mellanskog for ENA Energi AB in Enköping has been looked in to. ENA Energis plant is a combined power and heating plant and about 99, 5 percent of their fuel consisted of bio energy in year 2009 (ENA Energi, 2011, länk A). The main purpose with this report is to look at three questions: 1. How does the supply chain look today? From forest to industry. 2.

The aim for the study was to examine a harwarder´s (combined harvester-forwarder) productivity when harvesting forest fuel in first thinning stands that contains Lodgepole pine and calculate the economy of the harvesting work and estimate the quality of the thinning . The field study area where located near Arvån, about 15 kilometres south ?east from the city of Lycksele. The field studies were taken place in three different stands. All tree stands had the same tree age, but the tree species combination and the density varied.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

A recommendation for stand treatment of lodgepole pine (Pinus contorta) is, in a scientific point of view, lacking when it comes to harvesting for biomass energy. Within the next decades it is expected that 280 000 hectares of lodgepole pine will have reached thinning age on the domains of Svenska Cellulosa Aktiebolaget (SCA). Due to this the interest has grown rapidly for studying the possibilities of harvesting biofuel assortments already in the first thinning. In this study the distribution of the biomass within lodgepole pine trees has been studied and taken into account for estimating the proportions of harvested assortments when using different methods of thinning. The methods studied were conventional biofuel-harvesting (with delimbed branches gathered separately from the round wood) and thinning with cutting of round wood and long tops (incl.