Salome is the myth of the Oriental princess who dances for her stepfather, Herod the tetrark at his banquet. He becomes so enchanted by Salome's dance that he allows her to wish for what she wants. On the advice of Queen Herodias, Salome's mother, she asks the head of prophet John on a platter. Herod is horrified, but grants Salome's desire.This is the first in a series of Salome petitions as Mark and Matthew in the New Testament. Salome has since then never ceased to fascinate artists and writers through the ages.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

Sätten att titta på TV-serier har utökats de senaste åren i och med Internets allt mer centrala rolli vår mediekonsumtion. Sverige har gått ifrån att vara ett land med en enda public service-kanaltill ett med ett stort utbud av kommersiella TV-kanaler med syfte att locka tittare och annonsörer.I vår studie har vi undersökt aspekter av TV-serier som ligger utanför själva texten. GerardGenette (1997) var den som myntade uttrycket paratext som består av de två delarna peritextoch epitext. Dock är det Jonathan Gray (2010) som pratar om paratexter i relation till TV-serier,medan Genette (1997) endast beskriver paratexter i samband med litteratur. Eftersom det finnsså många olika TV-serier och TV-kanaler är det viktigt för en ny TV-serie att sticka ut blandmängden, samt att skapa en bild av vilken typ av TV-serie den är innan den faktiskt börjat sändas.Vi har använt oss av tre olika metoder för att kunna besvara våra två frågeställningar som rörvilka epitexter TV-kanaler använder sig av och hurvida det finns ett intresse hos tittare att kunnaengagera sig vidare i en TV-serie.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

Title: Crisis communication strategy and brand ? A case study of Swedish Red Crossthrough dialog analysisAuthor: Anneli SaarelaPresented: 01.06.2010Purpose: The study addresses the subjects of crisis communication and organisational brand, in relation to stakeholders and brand reputation. The purpose of this essay is to study the dialog regarding the crisis of remunerations with the Swedish Red Cross and how the organisation responds to the criticism. An identification and analysis of the discourse regarding the brand are also included in the study. Part of the empirical material will also be used in relation to Situational Crisis Communication Theory (SCCT).

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The quality of a design can improve essentially through a participatory designprocess. Initially, The Mulberry School project was supposed to be finished in two months but the involvement of artist Scott G Burnham extended the work and brought a new dimension into the project. In the beginning, Scott and I both worked on the project unaware of each other. I was appointed by the architect to design the external areas of the school and based on a site survey and analysis of the factors infl uencing the site I created a design proposal with the concept form and function. At the same time Scott performed a series of workshops initiated by the school. The purpose and goal was to include the students in the redevelopment of the school and to produce a design based on the thoughts and wishes of the students.

Drawing from the theoretical foundations of the ?critical theory? of the Frankfurt School and the media ethnographic ?cultural studies? approach of the british Birmingham School, this study attempts to sketch out a media theoretical overview of the contemporary state of media culture. Using the term convergence culture as the foundation, this study offers a theoretical background to the two contemporary streams that are the significant and distinct tendencies of convergence culture: intermedial convergence, its contemporary state and historical tendencies that can be traced back using the past media theoretical approach of the Frankfurt School, and cultural convergence, its contemporary state and historical tendencies, which lineage in a media theoretical context can be traced back to the british ethographic ?cultural studies? field. Using contemporary drama serials to identify and pinpoint these two stream, this study shows how intermedial convergence expresses itself today through media conglomeration in terms of branding, product placement and marketing as the result of the ?completed? convergence between screen culture and popular music as the current defining state of commodity culture.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

The largest project at the AICG lab at Linköping University, Cognitive models for virtual characters, focuses on creating an agent architecture for intelligent, virtual characters. The goal is to create an agent that acts naturally and gives a realistic user experience. The purpose of this thesis is to develop and implement an appropriate learning model that fits the existing agent architecture using an agile project methodology. The model developed can be seen as an online unsupervised reinforcement learning model that enhances experiences through reward. The model is based on Maes model where new effects are created depending on whether the agent is fulfilling its goals or not.The model we have developed is based on constant monitoring of the system.