To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

Along with the rapid expansion of wind power in Sweden during the last decades the competition about favorable areas has hardened. This among other reasons has caused the projectors to look into development of wind power in forests. There are several aspects regarding fatigue loads on the constructions that are severe in complex terrain, among which turbulence is one. The levels of turbulence which are accepted in order for the Turbines to face a life length exceeding 20 years are regulated by the International Electrotechnical Commission, (IEC). In order to keep the turbulence below these levels there are three major steering tools to use: The ambient turbulence decreases with height and can therefore be regulated by the hub height of the Turbines.

The upstream spawning migration of Atlantic salmon (Salmo salar) at the confluence area between the power-station outlet and the bypass-channel in river Umeälven (flow 430 m3s-1) was compared in 2004 and 2005, two years with different experimental flow-regimes. In 2004 the water flow in the bypass-channel was altered during the day with increased flows during the nights while the water flow in 2005 mainly was altered between the weekdays and weekends. Salmon showed altered migratory behaviour in this confluence area, assessed with telemetry (n=116) and echo-sounding, with up- or downstream responses depending on flow-changes in both the bypass and the power station outlet. Increased Turbine flow through the power-station generally attracted salmon into the tunnel outlet area while increased spill-flows facilitated salmon to enter the bypass. Echo-sounding in the confluence area showed an increased swimming activity up- and downstream due to time in the day and flow-rates through the tunnel outlet. No changes in activity could be detected due to increasing or decreasing flow through the hydro-power facility.

This thesis work has been performed at Volvo Aero Corporation in Trollhättan, at the department of ?hot structures? involving aircraft engine GP7000. The purpose with the study was to investigate the possibility to reduce size of the forging of flanges on the rear Turbine frame when purchasing. Thereto examine the parameters that affect the flanges motion during the manufacturing process. The goal was to provide Volvo Aero with foundation to later bring in slimmed forgings.

Detta examensarbete har gjorts i syfte att få fram förankringslängder till ett bergförankrat vindkraftverk.Målet med examensarbetet har varit att få fram längder på förankringstag och en prövning av flera olika stagvarianter har gjorts.Det dimensionerande momentet och egentyngden på vindkraftverket har tagits från ett tidigare projekt beläget i Solberg. Dessa krafter har fördelats ut till stagen och förankringslängder har tagits fram. De delar som har hanterats i rapporten utöver dimensioneringen är stagvarianter, borrning av stag, injekteringsbruk och provdragning. En bottenplatta i form av en oktogon har använts i dimensioneringsprocessen. Stagen har placerats i en cirkulär form i ett lager.

This master thesis has been performed at Solvina in Gothenburg for Skellefteå Kraftand Vattenfall Eldistribution. The aim of it is to investigate the consequences of theinstallation of a wind power plant on the mountain Uljabuouda in the vicinity ofArjeplog. Especially the impacts on voltage and transient stability are examined.Furthermore, the amount of extra strain on the voltage regulation equipment and theneeds for increased regulation capabilities are looked into.The wind power plant is planned to be built by Skellefteå Kraft and connected to a130 kV grid owned by Vattenfall Eldistribution. The work comprehends the followingmain parts:- Theoretical studies aimed at wind Turbines and power system stability issues.- Modelling of the type of wind Turbines assumed to be built on Uljabuouda.- Simulations of different operation cases and analysis of the simulation results.The results from the simulations show that, as far as voltage stability and extraworkload on tap-changers are concerned, the wind power plant does not, in anysignificant manner, worsen the present conditions. The problem of overloading theline between Arvidsjaur and Vargfors is also minor.

The current debate about environment and climate change has contributed to more andmore investment in alternative energy sources such as wind, solar and biogas. The Swedish Parliament has set the target that wind power should supply 10 TWh in 2015.In Sweden, wind power establishment began in the early 1980s. Since then the development has gained a tremendous momentum. The purpose of this study was to find out what problems wind power brings and what power relations that exists in connection with wind power establishment and how the landscape is affected by windpower construction, focusing on some cases in Falkenberg and Varberg. This study shows that wind power establishment is a very complicated process.

The wind power increase of Gotland as well as other parts of Sweden during the last ten year period has meant that this renewable energy source has increased its share over other fossil sources. The year of 2011 became the first when the wind power produced more energy than an average nuclear reactor. Now that wind power is in an expansive phase, the land issue will be of great interest. Land with good wind resources will be of interest to wind energy developers. The problems that this essay is based on are; how can landowners altering the economic conditions at a wind power establishment? What opportunities and obstacles exist for landowners who choose to set up wind power on their land? The purpose of this essay is to highlight the economic conditions that exist for landowners for the establishment of wind farms, with regard to compensation for the leasing and return on invested capital.

With growing economies and better living standards in many parts of the world today, there is a need of expanding the capacity of generating electricity. The alternatives for renewable energy technologies are not fully developed and have still some problems to conquer.The company Minesto has developed a technology that is called Deep Green. It is designed to gain electricity from tidal currents. Deep Green works in a similar way as a kite that is attached to the seafloor with a moving wire. It contains of a wing that moves due to the water current.

When planning new wind farms, the cost for the internal electrical grid is estimated to account for 8-9 % of the total investment cost. On top of that, the cost for accumulated reduced income over several years (due to electrical losses), has to be added. The economic lifespan is relatively long (about 20 years) which means that an error in the loss calculation could lead to a bad decision basis. The accumulated reduced incomes due to electrical losses can be higher than the initial investment cost for the internal electrical grid.Today, Statkraft Sweden is using a template number when estimating the electrical losses in a wind farm. The actual losses are probably lower than the template number which could lead to an unnecessary high loss cost when planning a new wind farm.The aim of this M.Sc.

Examensarbetet utfördes på University of Florida vid Department of Mechanical and AerospaceEngineering i deras Energy and Gas Dynamics Systems Laboratory. Laboratoriet forskar på enny gasturbincykel som producerar kraft, värme, kyla och vatten. Cykeln är kallad High PressureRegenerative Turbine Engine (HPRTE) och kombinerat med gasturbincykeln är ettabsorptionskylsystem (VARS). Kylsystemet drivs av spillvärme från avgaser som cirkuleras igasTurbinen, den producerade kylan används för att kyla ned högtryckskompressorinloppet.Syftet med det här examensarbetet är att undersöka möjligheten till att kyla ned inloppet tillkompressorn till temperaturer långt under fryspunkten för vattnet i den fuktiga gasen. Om gasenskall kylas till nivåer under fryspunkten måste vattnet föras bort från gasen.

In this thesis a method for evaluating investments in small scale hydro power is presented. An analysis of the future position that small scale hydro production will have on the Nordic electricity market is also carried out. This is done by an inventory of technology and economic and environmental aspects. The inventory is also a guide as to how the project should be implemented.Hydrolyzer is the name of the Excel tool developed to evaluate investments. The tool requests input data from the user and then evaluates the investment and generates a sensitivity analysis.

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind Turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

ABSTRACTThis project thesis has been written at the request of Mälardalens University, Västerås.The aeronautical engineering students at Mälardalens University and the pupils of Hässlö upper secondary school, all gets the opportunity to perform a computation lab with a real turbojet engine during their study. The goal of the lab from the University is that it should give the students applied experience from the theory part of which has been tought in the course ?Aircraft Engine Technology?.                      The pupils of the Hässlö upper secondary school are performing simpler calculations from the measured values of the equipment. This turbojet engine is located at Hässlö airport in the premises of Hässlö upper seconday school.Since the installation 1989, the engine has lost both thrust and reliability. This makes the theoretical computations made by the students inaccurate.

Visualization plays a key role in the concept of Lean. Lean was developed in Japan as a business philosophy in order to lead to an activity, where only steps that contribute to customer value of the final product are being performed. By defining the customer value and establish visualized standards, it is possible to see when situations differ from the standard. Then it?s possible to lead the process back on track.