During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

During the last couple of years it has been more important to reduce the driving on the field to prepair the soil after ploughing. The machine costs are high so it is necessary to be effective. To reach a pleasant soilbed directly after ploughing is sometimes possible on easier soils but heavier clay soils always need more tillages. There is a lot of equipment mounted on the ploughs on the market, for example Furrow Cracker and Furrow presses, which makes a pleasant soilbed on easier soils. The last year Överum and Kverneland have presented knives which are mounted on the wing or moulboard.

I sta?der byggs va?gtunnlar fo?r att ge rum a?t bosta?der och kontor, i dessa trafikplatser fa?rdas a?rligen miljontals fordon. Bra?nder i dessa insta?ngda utrymmen kan fa? allvarliga konsekvenser och arbetas aktivt med att fo?rhindras. I Va?rtahamnen i Stockholm projekteras mellan 2011 och 2013 en kortare va?gtunnel i slutet av E20.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The upstream spawning migration of Atlantic salmon (Salmo salar) at the confluence area between the power-station outlet and the bypass-channel in river Umeälven (flow 430 m3s-1) was compared in 2004 and 2005, two years with different experimental flow-regimes. In 2004 the water flow in the bypass-channel was altered during the day with increased flows during the nights while the water flow in 2005 mainly was altered between the weekdays and weekends. Salmon showed altered migratory behaviour in this confluence area, assessed with telemetry (n=116) and echo-sounding, with up- or downstream responses depending on flow-changes in both the bypass and the power station outlet. Increased turbine flow through the power-station generally attracted salmon into the tunnel outlet area while increased spill-flows facilitated salmon to enter the bypass. Echo-sounding in the confluence area showed an increased swimming activity up- and downstream due to time in the day and flow-rates through the tunnel outlet. No changes in activity could be detected due to increasing or decreasing flow through the hydro-power facility.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

Vid kontursprängning i en tunnel uppstår med jämna mellanrum fenomenet med kvarstående bergmassor i konturen, dessa bergmassor kallas glasögon. Resterna som blir kvar bidrar till ett stort bekymmer, eftersom det blir tvunget att spränga bort dem. Dessa glasögon kostar företaget tid och pengar som skulle kunna användas till bättre ändamål. Studierna i denna rapport berör två olika sprängämnessorter som laddas i konturen, SSE 7000P samt Cord 80g/m..

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

This thesis presents the results of the implementation and evaluation of two machine learning algorithms [Baz98, GB97]based on notions from Rough Set theory [Paw82]. Both algorithms were implemented and tested using the Weka [WF00]software framework. The main purpose for doing this was to investigate whether the experimental results obtained in [Baz98]could be reproduced, by implementing both algorithms in a framework that provided common functionalities needed by both. As a result of this thesis, a Rough Set framework accompanying the Weka system was designed and implemented, as well as three methods for discretization and three classi cation methods. The results of the evaluation did not match those obtained by the original authors.

To guarantee the customers a job satisfactory executed Sydved has been certified by the ISO 14001 standard. One part of the certification is the standards of soil damages. The soil damages were over represented during 1999 and 2000. It was therefore a need to study the problem in order to see what could be done to reduces these damages. A filed study was carried out on 21 subjectively selected stands from the following five districts: Vänersborg, Falköping, Borås, Jönköping and Åseda. As the study is a descriptive study of the soil damages, their character and extension, only stands were tracks were reported were considered.

The purpose of this paper is to examine how seams in an interactive system should be managed. Seamsin this study refer to the boundaries that arise when users move between for example differentsoftware, products or positioning systems. These seams are a cornerstone of the relatively unexploredarea called seamful design, which is based on that users can avail highlighted seams through activeparticipation in the use of a system. To analyze this area, seamful design is applied to the developmentof an interface of a smoothie vending machine. This smoothie machine thus provides the analyzedinteractive system, which the research questions are applied to as well as answered by.

NMD 100 is a notes and media dispensing machine, manufactured by De La Rue Ltd, located in Flen, Sweden. The customers, mainly bank offices, have expressed a need for a more comprehensive description of errors occurring from time to time in their machines. In order to acquire a BSc-degree in Computer and Electronics Technology at the University of Linköping I have carried out a diploma work, regarding new computer programs to fulfil the customers? wishes. The machine NMD 100 is connected to its PC through handshaking.