The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

Bakgrund: På intensivvårdsavdelningar finns olika rutiner kring huruvida endotrakealtubens position hos intuberade skall skiftas eller bibehållas i samma mungipa, då sidbyten kan leda till allvarliga komplikationer. Rutinen vid CIVA har varit att byta endotrakealtubens position på alla intuberade patienter en gång per dygn. Varken rutinen med skifte samt bibehållen position har utvärderats. Syftet med studien är att undersöka oralt intuberade patienters munhälsa vid bibehållen position av endotrakealtub under vårdtiden. Metod: Studien är en kvantitativ deskriptiv tvärsnittsstudie.

The weather has been extremely rainy the last summers in Sweden. Because of the rain, a lot of harvested straw has been lost since it was too wet to store. When the pig producers couldn?t get enough straw to use as bedding, an alternative was requested. Silage is a realistic alternative to straw but since silage often contains clover, it may not be suitable to use in pig production since clover is rich in phytoestrogens.

Background Calprotectin is a protein expressed in the cytoplasm inside the neutrophile granulocytes. During inflammatory bowel disease (IBD), the neutrophile granulocytes are involved in a complex interaction at the inflammatory area where they die and release their content into the intestinal lumen. Therefore, calprotectin in stool is a suitable marker for diagnosis and measurement of the disease-activity in patients with IBD. The most commonly used method to detect calprotectin in stool is ELISA, but the process of manual preparation of stool samples is time-consuming.Aim The objective of the study was to evaluate an extraction method that could replace manual preparation of fecal samples and to compare different methods for measuring Calprotectin in stool using two ELISA-methods from two manufacturers and one rapidtest.Methods For extraction of calprotectin from stool samples we used sample collector tubes from Epitope Diagnostics and fecal preparation kits from Roche. Two different ELISA-kits for measuring calprotectin concentration in stool were compared.

Trakealkollaps är relativt ovanligt förekommande hos hästar men är något vanligare hos småvuxna ponnyraser. Sjukdomen har ett progressivt förlopp och är ofta långt framskriden innan respirationssymtom som missljud, hosta och dyspné uppkommer. De tillgängliga behandlingsalternativen ger sällan tillfredsställande resultat och prognosen vid höggradig kollaps med grava symtom får anses som dålig. Syftet med den här studien var att undersöka om och i så fall i vilken grad trakealkollaps påverkar hästens användbarhet, detta gjordes genom att undersöka om det fanns någon skillnad i arbetstolerans och lungfunktion mellan en grupp friska shetlandsponnyer och en grupp shetlandsponnyer med trakealkollaps. Den friska gruppen bestod av tio ponnyer och gruppen med kollaps av fyra ponnyer, varav tre hade trakealkollaps av grad 3 och en av grad 2.

I have done a case-study about building a new stable for slaughter pigs at a farm close to Kalmar. The farm is able to supply the breeding with cereals and it has enough area to spread the manure on. The most important factors to gain profit, is the cost for building the stable, the price of the feeding-stuff and the growth of the pigs. The discount from the slaughter-house was less important than I thought from the beginning, and it?s a factor that is hard to influence. With the new production of slaughter-pig and cattle that already exist on the farm, the farm will get a well-functioned rotation of crops with lye and autumn rape as interruption-crop.

When exposed to them, isocyanates can induce serious injuries in the respiratory tract and irritation on the skin and in the eyes. They are therefore interesting from the point of view of occupational health. The purpose of this thesis was to collect isocyanates in air with impinger-filter samplers and solvent free samplers. Furthermore the isocyanates were to be analyzed with liquid chromatography-mass spectrometry. The solvent free sampler consists of a polypropylene tube and filter holder fitted with glass fiber filters impregnated with derivatization reagent, coupled with a pump.

Dairy farmers using artificial insemination (AI) are dependent on effective oestrus detection. In Sweden, AI is used for a majority of all dairy cows and oestrus synchronisation with hormones is not allowed. There are reports of declining ability to express oestrus with higher levels of milk production. This makes oestrus detection more difficult. Several aids for oestrus detection have been developed, for instance pedometers and mounting detectors.

The purpose of this literature review was to investigate how the rearing systems influence the behaviour of dairy calves. Calves are social animals that form groups within the herd where play and social licking between calves are important social activities. Suckling is a complex behaviour and essential for the calf's survival. In the modern rearing systems the calf is usually separated from its mother soon after birth. Calves are then kept in individual pens, group pens or, more rarely, with a foster cow.

The purpose with this study was to find out if tailbiting pigs have a higher or lower daily weight gain than non-tailbiting pigs in the same pen before tailbitingbehaviour occur. The purpose was also to compare the occurrence of tailbiting between different breeds (Swedish Landrace, Yorkshire and Hampshire). Tailbiting among pigs has been a problem for pigfarmers a long time. Tailbiting means reduced animal welfare for the pig and economical loss for the farmer. The results of this study are based on statistical analyses.

The pig industry suffers economical loss due to stillbirths, piglet mortality and low birth weight. This is due to breeding programs that have resulted in larger litters. It has been suggested that these problems are due to the metabolic state of the sow during gestation and the fact that she might not be able to supply her foetuses with enough nutrients for survival and a high and even birth weight. A lot of research has been done to investigate whether body weight and back fat thickness of the sow has any impact on her reproductive traits and if there are any special feed components that improve reproduction. Fibers and unsaturated fatty acids have a positive impact on reproductive traits as long as the sow is fed a sufficient amount of energy and protein during gestation and lactation.

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

Rörfonation och traditionell svensk röstbehandling är två av de vanligaste behandlingsalternativen inom svensk röstlogopedi idag. Som forskare är det viktigt att kontinuerligt utvärdera de behandlingar som erbjuds för att göra vården mer kvalitativ och kostnadseffektiv. Finns det skillnader i behandlingseffekt mellan dessa två röstbehandlingar? Är skillnaderna så tydliga att det går att fastslå att den ena behandlingen är att föredra framför den andra?Med analyser av ett patientmaterial, före och efter behandling, i form av akustisk analys, perceptuella bedömningar av en grupp erfarna logopeder samt patienternas självskattningar syftar föreliggande uppsats till att besvara vad behandlingsformerna har för effekt inom dessa områden.Patientmaterialet bestod av totalt 28 patienter varav 23 fullföljde behandling. Tolv av dessa erhöll behandling med rörfonation medan resterande elva patienter erhöll traditionell svensk röstbehandling..

Automatic milking systems (AMS) are part of a growing trend in Sweden and the number of milk-producing farms is decreasing rapidly. One main reason for the AMS is its ability to facilitate work for the farmer. The effects of introduction prior to calving have not been documented earlier and farmers are not in agreement, however they seldom see a problem with the introduction. The aim of this report is to find differences between two groups of heifers, where one group is trained i.e. introduced to the AMS before calving and the other group is introduced after calving.

Baled silage has become one of the most important conservation methods in Sweden. Because we take our grass as silage we get the quality and the good hygenic that we would like to have. Silage has become a big buisiness also in the horse feeding where many of the breeders have changed from the hay to the hay-silage. The difference between regular silage and haysilage is that the hay silage is dryer (60-70%DM). The hay-silage has also put higher demands on machinery and wrapping material since the grass gets sharper and harder to press together real hard. The main reason for the test was to compare two different systems for wrapping, the new Cross Pac and conventional.