The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

Detta arbete har undersökt skillnaderna mellan den nuvarande skogsvårdslagen och den föregående. Undersökningen har bestått av två delar, där ena delen är en litteraturstudie av lagarna och den andra är en fältstudie av metoder för att mäta naturhänsynsförändring. Som komplement till fältstudien har en litteraturstudie av undersökningsparametranas naturvårdsnytta. Litteraturstudien av lagarna gick till på följande sätt, inledningen av båda lagarna och hänsynsparagraferna har lästs och jämförts. Fältstudie har gjorts efter metoder som har arbetats fram och sedan testats i fält.

Detta examensarbete har utförts i samarbete med arkitektkontoret Equator, som ärbeläget i Stockholm. Syftet med vårt uppdrag har varit att ta fram ett intresseväckandebildmaterial för receptionsmiljöer. Vårt fokus låg i att förstå hur man bäst förmedlar rumi bilder. Den övergripande frågeställningen var; hur får man i en bild, information omrummet och dess rymd?Metoder vi använde oss av för att nå vårt mål var litteraturstudier, enkätundersökningoch utprovningar.

Planet rendering plays an important role in universe visualization and geographic visualization. The recent tools and methods allow better data acquisition, usually with very high resolution. However in computer graphics, there is always the limitation on the resolution of geometry and texture due to numerical imprecision. Not many applications can handle high resolution data effectively.This thesis introduces, Implicit Surface Scene, a level of detail scene management inspired by dynamic coordinate system and SCALEGRAPH? which change over time depending on the current camera position relative to the planet surface.

Forestry and forest products are vital components of the Swedish economy but the forest is also important for recreation, hunting, out-door life and conserving biodiversity. The Swedish Forest Act has two equally important objectives, production and environmental protection. Polytax is the Swedish Forest Agency´s inventory programme which monitors progress toward the two objectives in connection with regeneration fellings. It includes data on environmental protection measures taken in connection with regeneration fellings. 30 § of the Swedish Forestry Act and related regulations specify the demands for conserva-tion of nature.

Urban trees have very little in common with trees on natural sites, such as forests or pastures. Trees in urban environments are often planted in packed soil and in small volumes. This can lead to decreased availability of water and oxygen, as well as deteriorated ability for the soil to store nutritional elements. Also above ground the tree usually have limited space in cities. Regulations on free height over roads and cycle tracks demands high stems at an early stage of their development.

A secondary and a pioneer tree species can with advantage be included in a mixed stand to increase the use of sunlight. Nitrogen-fixing plants have been shown to increase the supply of nitrogen in the soil by, for example, litter fall. This deposition acts as a biological fertilization, which may be used by non-fixing plants. Alder is a nitrogen-fixing, pioneer tree species that loses its nitrogen-rich leaves late in the autumn. The aim of this study was to examine the effect on the total volume of production, when different proportions of nitrogen-fixing Alder were part of spruce stands.

The current state of knowledge indicates that there is more than one factor that initiates heartwood transition. This study supports its hypothesis on the theory that heartwood is formed by a fixed fraction of the annual growthring, 0,5 to 0,8 rings. To calculate heartwood volume modelings were carried out in four different pine stands with different spacings, 0,75, 1,25, 1,5 and three meters. The model indicates heartwood diameter (HWD) and is based on four explanatory variables, height (H), crown ratio (CR%), diameter breast height (DBH) and tree height (TH). The shifting plant spacing results in varying growth rate in the juvenile stage.

This study is made on assignment by the local board of forestry in Skåne, Blekinge and Halland. The change of the forest law 1994 brought a new type of management plan. A more active planning was introduced in order to equate the environment goal with the production goal. The purpose with this study is to give a better picture of how planning for nature conservation in production forest is made and to develop support for selection of silviculture methods for stands with combined goals. With combined goals means production forestry with a reinforced consideration to both nature and culture, called PF-classified stands. This was done by: ? Describing silviculture models from the literature that are possible to use for stands with combined goals. ? Describing silviculture models that is used in practice in stands with combined goals. ? Describing how the classification of stands with combined goals is used. Which means, were in the terrain, with which frequency and in which type of forest PF-classification is used. ? Comparing differences and similarities of theoretical and practical used models. The study was done partly as a literature study and partly as an interview study of forest planners.

This thesis includes a review of scientific studies of tree injuries following mechanized thinning. Interviews have been made with drivers of single grip harvesters and forwarders in forest thinning and a number of essential factors have been identified as the most important to take into account in order to minimize and/orprevent injuries to stems and roots of remaining trees..

A common problem in forestry is plant death caused by frost. The risk of frost is highest on wind protected, flat or low-lying areas in the terrain. Here you often have regeneration problems with Norwegian spruce which is especially sensitive to spring frost. Swedish tree experiments have shown that the black spruce can be a suitable alternative on these areas, for example on moisture frost prone areas. The species originates from North America and its pioneer tree characteristics make it more frost hardy than Norwegian spruce.

In recent years the arts institutions? role in society have changed. With increased demands on attracting greater number of visitors they use concepts from corporate marketing to communicate with greater success. Theories from museum studies show that the importance of rendering authenticity now has become the new imperative in order to retain the status of a reputable institution. This thesis aims to discuss the development of a new visual identity for the public and non-profit institution Malmö konsthall.

The understanding of the role of nature for rehabilitation of both physical and psychological afflictions has greatly increased in the last few years. There?s a lot of science that describes the healing effects of nature. The rehabilitation garden in Alnarp has contributed with very positive results from the treatments of patients with burnout syndrome. In the first stages of rehabilitation, the need for calm is very important and a demand-less and stress-free environment is of essence.