This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

Today automotive manufacturers are facing a crisis with increased pressure to strengthen their brands. To prevent declining results many automakers have chosen to extend its brand to other industries i.e. various forms of brand extensions. Automotive manufacturers have developed an international strategy for what merchandise to offer. The strategy has received an overall positive response, however, it does not apply well within the Swedish market where merchandise is sold in less quantity than abroad.

Lots of choices are to be made by a company who enters a new market with a new businessidea. Common questions that show up when a company is making it´s businessplan are how to target the market and how to use marketing as a tool to reach a specific customer or segment. It is difficult to know wether to target the market in different ways and what processes that can be used in the choice how to select the most potential and profitable customer. Another important question is how a company can positioning themself in a way so the customer will get a positive understanding of the company and what different positive abilities to mention in a possible businessproposal. This study is made on a small company in Sweden called AYEN Technology.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

While the call for regulations against greenhouse gas emissions are louder then ever before, demand for oil is also at an all time high. Oil companies face the dilemma of making sound business without being perceived as environmental villains. In this essay I will examine how BP, one of the largest companies in the world, broke rank with the industry and devoted itself to being an environmental friendly oil company. The actions and motives of this change will be evaluated through up-to-date theories about company motivation to environmental adaptation. We see that BP:s transformation can be well explained through Simone Pulvers theory about the socially embedded company.

Every year the Swedish government invests capital in different projects. In recent years the Swedish government has chosen to invest in design. The reason for this is that the government wants industry to use design as a competitive source. Two organizations, Svensk Form and Stiftelsen Svensk Indistridesign, have been assigned to improve industry and society?s under¬standing of design.

The purpose of this thesis is to examine whether Swedish, Internet-based travel agencies, acting on a consumer market are working towards creating added value for their customers. If that is the case, how and why do they use such a mode of operation.The theoretical framework was based on Grönroos´ ?Augmented service offering?, which treats added value as an addition to the core service. The services offered on five of the larger companies´ websites on the market were examined and 3 representatives of the five companies were interviewed.The study shows that 2 of the examined companies did not produce any added value, while 3 of the companies did produce added value for the customer. The added value was generated through packaging of core-, facilitating- and supporting services for the purpose of differentiating the company towards competitors and generating service fees..

As the football industry develops into a highly competitive commercialized industry, football clubs must step up and improve their business strategy. This study focuses on the famous Italian club AC Milan, a club with many international titles but with declining revenues. The purpose of this thesis is to study how AC Milan can generate higher revenues by comparing its marketing and business strategy with the most profitable clubs in the world, the benchmarking partners Real Madrid and Manchester United. By using a benchmarking model, following the five steps of this process, conducting observation studies, an interview and examining secondhand information, gaps between the clubs were evaluated and analyzed. These evaluations became together with chosen theoretical references, the basis for the improvement suggestions and conclusions shown by the authors.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

In the construction industry today there is a significant technological revolution goingon. New methods for automated processes and information management are developedcontinuously. Intense studies are currently taking place to ensure ways and means toembrace the new technology of BIM.At the present, environmental certification systems are considered cumbersome andchallenging. However, the increasing demands of sustainable development in the constructionindustry imply that the environmental certifications will not disappear. ThisMaster Thesis examines the possibilities to apply BIM technology within the field ofenvironmental certifications to streamline the processes.The applications that provide the best opportunities are:- To use BIM to be able to, during the design stage, dynamically evaluate the resultor score a certain building will achieve.- To avoid unnecessary work through collection of data for calculations directlyfrom a BIM-model.- To be able to automate certain time consuming calculations that are currentlyperformed manually.- To automatically examine the completed model to ensure that the demands arefulfilled.The possibilities to use BIM within these areas are however limited by the technologyitself.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

Background: The global responsibility for multinational companies is a current matter of subject. Now when the world increasingly is getting globalized, economic growth is created, which brings a bigger demand of responsibility on companies. The leading companies from every industry is often becoming the frame for how the production process works and is therefore exposed to outer pressure which, for example, is coming from consumers and the media. Since consumers at present are more aware of what they are buying and where it comes from, it is important that the companies take social responsibility. We have therefore studied three big companies within the clothing industry to see in witch way they are taking their social responsibility.Purpose: Our purpose was to explore how companies within the clothing industry describe their work with Corporate Social Responsibility, code of conducts and where the incentive behind this work is coming from.Method: We have, through a qualitative study, examined how three large companies work with Corporate Social Responsibility.

Tourism is often being viewed as one of the worlds largest sectors and a great contribution to growth and development. There is a large motivation amongst developing countries to promote themselves as a tourist destination, since they expect the tourism to generate economic growth. The government of Thailand has been promoting tourism since 1960, and the number of foreign visitors has increased from 100 000 back then to 13.5 million in 2006. The purpose of this paper was to investigate weather the increasing tourism industry in Thailand has pulled resources away from other sectors of the economy towards the tourism sector, and in that way harming Thailand?s international competitiveness and causing deindustrialization.