Sustainability and the traffics impact on the environment have become increasingly central within spatial planning. For many years, planning has been focusing on building new roads - this has resulted in increased use of automobiles, which many believe is unsustainable in the longer term. Therefore, authorities at national, regional and local level want to increase the use of alternative transport modes ? such as walking, cycling and traveling by bus.The thesis intends to study if the Municipality of Umeå?s policies for sustainable development have led to an increased use of public transportation. The use of public transport in Umeå is also compared with developments at national level, in order to see if there are differences in the level and trend.

The research in this paper aims to producing a home version machine thatcan dry and make biological waste into compact pellets. This product ismade primarily for those who want to improve the environment and reducethe energy consuming process of separating the biological leftovers fromother waste in the large processing plants and save money due to reducedpickups of waste. Since there is no commercially available product thatdoes what we want to achieve we had to start from the beginning with boththe design and the mechanical aspects. The result is a machine, that fits inour homes, and in an easy and inexpensive way reduces the amount ofbiological waste that needs to be collected by the public wastetransportation system. This is done without reducing any of the energy inthe waste and it can still be used to compost or by large-scale plants that usethe waste to make electricity.

This thesis examines the relationship between the marginalization of ornamentation during functionalist modernism and the effect it had on female graphic design practice. By examining the historiography from a gender and feminist theory of history I present a different way of interpreting, not only the history of graphic design but also the concept of graphic design. This thesis does not reach a conclusive result, instead it sets the foundation for further research and illustrates the opportunities that we as graphic designers have to benefit contemporary graphic design by critically reviewing and redefining our history through a diverse historiography..

This degree project contains a theoretical and a practical part about magazine design. Literature aboutthe subject?s typography and magazine design has been studied and put into practice on the professionaljournal Ingenjören. Besides of that a study about the history of magazine typography for the lastfifty years has been done.Typography and other design factors are important for the magazine to be readable and gives at thesame time the magazine an identity of its own, which has become more and more important throughoutthe last decades.The result of this degree project is a new design for Ingenjören, a design that agrees more with howthe journal want to be considered. A new template, a dummy and a manual have been produced.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Research is a time-consuming endeavor which requires appropriate tools to manage often vast amounts of information. Militarization 2.0 is a research project aiming to explore Militarization in social media. The aim of this project is to design a user interface for supporting researchers in projects involving large amounts of data in qualitative studies. The project will follow the design process of the first version of the Militarization 2.0 research database interface. The design process involves user studies, interviews and design and testing of paper and digital prototypes.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Responsiv design syftar till att en webbsida ska anpassa sig efter anva?ndarens enhet, oavsett enhetens ska?rmstorlek. Arbetet har ga?tt ut pa? att ta reda pa? om man kan utveckla en framga?ngsrik responsiv design som fungerar pa? ma?nga typer av enheter enbart med en persondator som utvecklingsplattform, och pa? sa? sa?tt undvika att beho?va genomga? en stor process med testning. Resultaten visar att det a?r fullt mo?jligt. .

The purpose of current paper is to identify the differences (ifany) between Swedish and Turkish consumers in terms ofproduct design perception and to identify the differences toproduct design in relating the four dimensions / characteristics:1.Aesthetical attractiveness, 2.Functionality, 3.Value and4.Quality.The findings of the study indicate the existence of a universal perception of design. Despite the culturally different countries that are examined the empirical material consistently display similarities between the two countries. Both the quantitative and qualitative data point to a very similar perception in terms of design. The possibilities of global design are discussed for companies as well as managerial implications and future research..

Transcending sound design is possible. There are unseen possibilities and a great potential for improvement and development in sound and music design ? but there is a great difficulty penetrating the obstacles that lies in the way for such development to take place and to exist. The difficulties in being negotiable and productive lies more within the limits of the audience it has to gain, than in itself. It is as though music and sound design has to evolve very slowly, in an almost evolutionary style; one step at a time, to be accepted.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Graphic design is an integrated part of the public spaces we move through in our daily lives. This thesis explores the emotional aspects of graphic design, with a focus on environmental graphics for the public space. The goal is to find ways in which the emotional aspects of a design solution can be varied without compromising the practical aspects, i.e. affect the conveyance of information. This goal is pursued through an analysis of historical and contemporary literature as well as by design practise.

New technologies and new consumer behaviors are having a large impact on mediacompanies. The biggest change is in the behavior of the younger demographic whereold platforms like television are abandoned for new online platforms. In this newworld, media companies and organizations need new tools and business models tostay competitive. One such tool is Design Thinking, a term used to describe a cognitivedesign-specific set of activities used during a design process. It has been popularizedin commercial areas and there the term is used to describe an applicable workflowused to promote the skills required to use Design Thinking.

This report describes how the process has evolved during the creation of a new web page forthe company Scandinavian Travel Agent DMC. The design methods that have been used aredescribed and also how parts of the webpage have been created by using the design methodresults. Our reflections around design and functionality are explained and how usability hasbeen our main focus during the master thesis. We also describe how it has been to work withan external costumer and how the tasks constantly have changed and been added as theprocess has continued.The background to this work is that AB Scandinavian Travel Agent DMC need to improve theircurrent web page. This to give the clients better needed information about destinations, butalso to stand out in the competitive travel business.