The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.

Sweden adopted a new anti-discrimination legislation 2009, DiskL, which aim to prevent direct and indirect discrimination in matters of employment and occupation.According to directives and practices from EU, pregnant workers are entitled a special protection from discrimination during employment situations. The purpose of this essay is to study the legal protection for pregnant workers in employment situations and also analyze whether male workers have similar protection when they plan parental leave. Both regulations from the EU-law and the Swedish law are presented and discussed. This because Swedish discrimination legislation is largely influenced by the EU-law.The study confirms that pregnant workers have a strong legal protection against discrimination through directives from the EU and DiskL. Employers must include this protection in employment situations.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

Climate change is the modern society?s common issue. The developed countries areconsuming more than what is sustainable, and the climate change due to the use offossil fuels can be seen clearly. EU has specified goals, in order to stop furtherdamage, which demand that every member state have to reduce its energyconsumption by 20 % before 2020 and 50 % before 2050, relative to 1995.The Swedish government uses a number of instruments to encourage reduction in theusage of energy, but every individual has to contribute to reach the goals.With increasing energy price the cost of living is going up. A lot of people are lookingfor ways to save energy and not be affected as much by the increasing price.Investments for insulation, replacement of windows and replacing old heating systemfor a new efficient heat pump is getting more and more common.This thesis is about investigating the possibilities in becoming independent from buyingenergy for households.

Over the past one hundred years, there has been an increasing globalization and industrialization of the food systems. As a result, the distance between the production and the consumption of food has increased, both in time and space and in the minds of people. There is also an increasing concern for the environmental effects of industrial farming and the long distance transportation of food. Sustainable agriculture and efforts to build more sustainable food systems has emerged in opposition to the global food market. The definitions of sustainability usually include environmental, social and economical aspects. To build more localized food systems is seen as one way towards increased sustainability.

These studies are done in behalf of Saab AB AVITRONICS in Järfälla in the form of a thesis atthe Royal Institute of Technology in Stockholm.The task was to examine the parameters that plays a role in the construction of modern radomesoperating in broadband applications.This was interesting for Saab to get an indication of which way they should go at the newdevelopment of radomes for the next generation of equipment for electronic warfare.After a thorough analysis of the influencing parameters, a optimization application was made toget a automated way to get a radome design by specifying data on the radome size, airloads,materials, etc.This is to minimise the time of the laborious work that radome development.inply.This was solved by letting ANSYS calculate the strength of the radome structure and MATLABcalculate electromagnetic data and cost models of different sizes and materials.All these parameters woven together with the optimization tool modeFrontier picks data from therespective program and perform an optimization algorithm and then iterate a step and sends thisdata to calculation programs for the new input data. In the end, we have received a convergedpoint with our optimal solution.For the presumptions and limitations for which applied for this thesis, the result was prettyintuitive. That is to say that the smaller radome - the less materal is needed and lowermanufacturing costs results in the cheapest solution possible. The reality is not so simple. Whereyou have to take more of the electrical details such as the effect on the transmitter as a majorfactor..

The purpose of this study is to shed light on and describe Kramfors travel centers function and relationship to the surrounding urban environment, and how this core is experienced by residents and visitors. To do this, the use of the travel center, its relationship to Kramfors city center and the perception of it, as well as possible improvement areas has been studied.This has been examined using a quantitative method by designing a questionnaire and the usage of a research strategy through the implementation of a small-scale survey. Within this a cluster sampling was applied.The result shows that Kramfors travel centers is primarily used for traveling and is used most frequently by the visitors within the study. It is also shown that residents 'primary reason for traveling from the travel center is friends and family, followed by shopping, and that the visitors' primary motive for traveling is friends and family as well, followed by work. The mode of transportation between the travel center and destinations are mainly walking, while the mode of transport between homes and the travel center proves to be the car.

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

In today's society, the availability of energy plays an integral part in our everyday lives. Unfortunately, the price of energy in Sweden has increased in recent decades. A large part of our energy consumption goes to heating modules for houses, where heating methods that depend on energy sources such as electricity, district heating, fuel oil, gas and biofuels are the most common ones. During the winter period, the increase in energy costs becomes significantly evident, especially for small property owners. This increase in energy cost is most noticeable for home owners with electric heating.This thesis is written at the Halmstad University, in cooperation with a company, which makes parts of this thesis confidential.

The concept of large paintings includes panoramas, cycloramas and other paintings thatin size exceeds the normal magnitude of wall hung paintings. When these large paintingsare mounted in the ceiling, they are referred to as plafonds. When they are performedon canvas, certain kinds of structural distortions and stress occurs. In addition, becauseof their size and mounting high up in the ceiling, plafond paintings are often difficult tohandle, which leads to less or no maintenance. A plafond may therefore be left withoutattendance for many decades.This thesis has its focus on what happens with plafond paintings on canvas when they areexposed to gravitational forces, and the problems involved in restoring large paintingsmounted in the ceiling.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

Abstract: The purpose of this thesis is to study the importance of having a website for traditional service companies as well as the factors that might influence its importance. This is done by answering three research questions that all contribute to the answer of the main purpose. A qualitative study has been performed including eight interviews with respondents from eight different service companies presenting four different types of businesses. The empirical findings of the study are analyzed with the help of the theoretical frame of references in order to identify the most interesting conclusions. The results of the thesis state that the main purpose of the website among the studied companies is to rationalize and save costs.

Background: The increasing competition on the market demand both companies and supply chains to find optimal solutions. The edeavour to reduce inventory levels is a part of this. Earlier, inventory was seen upon as valuable assets, but today they tend to be more and more negative in the eyes of the companies. Inventory demands capital, handling, and space. Therefore inventory creates unnecessary costs.

Syfte: Studiens syfte är att undersöka ?venture capital?-branschen och hur omfattande problemen med asymmetrisk information och ?moral hazard? är samt hur risk hanteras. Syftet är också att arbeta fram en hypotes för framtida kvantitativ forskning. Ansats/metod: Med en deduktiv ansats har en kvalitativ studie genomförts. Datainsamling av empirisk primärdata har skett genom semi-strukturerade intervjuer. Teoretisk referensram: Det teoretiska kapitlet tar upp grundläggande teorier kring asymmetrisk information, ?moral hazard?, ?agency costs? och riskhantering.