Damages have four main functions: reparation, placing of the costs, distribution of the losses and prevention. The rules about damages evolved before liability insurance had the extension it has today, 97 % of the Swedish populations is covered by liability insurance, since it is included in the comprehensive household insurance. Liability insurance should be looked at in the light of the damage rules, but the rules about damages are adapted to the insurance possibilities.The Law of damages contains, though the general adjustment article 6:2, the adjustment article 2:4 about children and the adjustment article 2:5 about the mentally ill, a possibility to adjust a non reasonable damage claim. If the liability insurance covers the damages no adjustment is made. Even when the adjustment articles are being used the damages is a heavy burden for the person who is liable for the damages.

I have chosen to work with drag hose system and try to find an alternative to spread manure with a usually tank system, see if you can make a profit and what advantage and disadvantage the system has. The purpose whith the project has been to try to make a system that can spread manure at better occasions than farmers do today and above everything make a financial addition. Today it is just a heavy work and takes a lot of time. I have counted on investment costs and carefully examined what equipment you need. I have not the technical details in my project, I have just tried to understand how it is to spread manure with drag hose system today. What is drag hose system? You put a hose in your manuretank, connect it to a pump that is driven by a traktor or stationary engine. You place a hose that reach the field were you are going to spread.

The EU Council adopted in 2007, environmental and energy goals with the aim of them must be met by 2050. This, in combination with those of the Swedish government 15 enacted environmental goals is supposed to lead the way for the Swedish environmental work.This report has examined measures in properties in the Swedish Cooperative Housing Society (SKB) stocks.The report discusses a range of measures that might be appropriate to apply on the properties to make them more energy efficient.One of the measures discussed, the vent whose primary purpose is to create a good indoor environment for the residents but is also where the most energy is lost.Another measure discussed is insulation of the building envelope on the estate to make it more energy efficient. To put extra insulation on the building envelope is important because of the large amount of energy that is lost through the walls, ceilings and floors.Future actions that may be implemented is individual billing of heating and hot water. This system has been used in European countries since the 70's and today the EU wants to increase the own individuals control over their electricity costs. This has led to a discussion whether to implement the system in Sweden or not.However, there are a number of equitable measures to be sorted out before the system can be used in any great scale.Finally, it is important to remember that environmental measures should be the primary and the pursuit of cost reductions the secondary otherwise you risk the environmental work to be counterproductive..

This thesis examines the tendering process from the point of view of Swedish building contractors. The purpose with the study is to chart the decision process for the contractors during the tendering process. The study is designed as a survey study. This made it possible to reach a wide base of respondents, not letting such factors as geography being an issue. The survey itself was characterised by a very high response rate compared to other similar studies. The result from this study shows that former experience from similar projects, current workload and the clients economic condition are very important factors for both whether or not the contractor will bid for a project as well as the cost estimation and tendering price. Former experience from similar projects is also an important factor for the determination of the indirect costs.

In the beginning of the 1990?s ratite breeding for meat production was introduced in many European countries, including Sweden. The knowledge of ostrich farming and diseases of ratites is increasing internationally but is still often limited among veterinarians. This report consists of a literature study and a summary of pathology findings from ratites submitted for necropsy to the National Veterinary Institute (SVA) in Uppsala, during 1995 to 2001. The purpose is to give a general introduction to ostrich and ratite breeding and to give an overview of the most common diseases. The necropsy data from 1995 to 2001, indicate that many of the diseases are management related rather than caused by infectious agents. Due to cold climate ostrich breeders in Sweden need to supply well designed buildings and good care of the animal.

The aim of the study was to compare productivity in first thinning of birch stands, when either energy- or pulpwood was harvested. The systems total profitability was also compared by including forwarding and chipping costs. A Gremo 950 HPVR harvester was used and the same driver was used under the entire study. During the pulpwood harvest a Logmax 4000b harvester head was used and a feller buncher head made by Silvatec was used during the energy wood harvest. Six study unit pairs were located in a birch dominated stand outside Ängelholm in Skåne.

Sweden has a natural gas grid extending along the west coast, from Trelleborg to Stenungsund. There are also several smaller local networks where a planned natural gas pipeline from Skutskär to Hofors prompted the need for a comprehensive study. This study examines the linkages that exist in terms of technology and market of natural gas and biogas in Sweden. Sweden has set high targets for the future with ambition to become independent of coal and oil as energy sources. Since 1985, a part of the solution has been import of Danish natural gas.

Swedish biogas is currently produced mainly by anaerobic digestion of sewage sludgeat sewage treatment plants, landfills and anaerobic digestion of household or industrialwaste. Also cattle ma-nure from farms can be used to produce biogas. Upgradingbiogas represents an increase in methane concentration from about 65 % to about 97%. In addition, particles and contaminants must be sepa-rated from the upgradedbiogas. There are various methods for upgrading and this report compares sixdifferent methods with respect to environment and economy: water scrubber,Biosling, cryo technology, chemical absorption, Pressure Swing Adsorption (PSA) andmembrane separation.According to the used ORWARE model, chemical adsorption with amine has the leastenvironmen-tal impact (methane emissions) and the lowest costs.

Children are a group of patients that require special knowledge from the anesthesia staff, both general and specific. Theoretical knowledge and practical experience is necessary to adequately care for the child as it anatomically, physiologically and mentally may differ from adult patients.A growing problem in the pediatric population is overweight and obesity. From a stagnation in the early 2000s the prevalence of overweight and obesity among children in the world are again increasing.The purpose of this study was to examine peri-operative care of overweight and obese children.Systematic searches were done in PubMed, CINAHL and Scopus. After the quality audit according to SBU, twelve articles were included for analysis.Results suggest that overweight and obese children have a higher risk of respiratory peri-operative complications. The risk of hospital admission after outpatient surgery was also greater in this group as well as higher costs for health care.Overweight and obese children are complex subjects with more frequent peri-operative risk factors than normal-weight children.

The situation that one can discern on the Swedish real estate market is that while there are several offices vacant, the need for apartments is high ? the vacancy rate for apartments is non-existent. According to the rebuilding of Skatteskrapan one will realise that the project requires a lot of money, even though it promotes the residential situation. The real estate owner experiences a risk in rebuilding real estates ? whether it will generate good yield or not.

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

Research issue: The transition from Basel II to Basel III becomes consuming for banks, financially. But Basel III should be profitably for financial market economy. Risks in the financial world is very complex. Is Basel III is sufficient to manage risk and future crisesPurpose: The purpose of this paper is to examine the application of Basel II and the transition to Basel III in Sweden with the banking system in focus.Method: The study has a qualitative research methodology for the collection of empirical data. The study is based on interviews with four large banks of Sweden (Swedbank, SEB, Nordea, Handelsbanken) and with Finansinspektionen.

This report aims to suggest recommendations that will increase the efficien¬cy in theconstruction process of a construction project. Through interviews, studies of budgetcalculations and examples given by the project management at the construction sightsan understanding of some complications have been gained. These complications havebeen tracked back in an attempt to find the source of the problem, and at the end ofthe report some suggestions have been presented with the pur-pose of preventingthese complications. Through the interviews it is suggested that many complications re-late to lack ofcommunication and motivation due to poor planning be-fore and during theconstruction process, a suggestion that is supported by the study of the budgetcalculations. The examples from the project management also points out someshortages in planning, but also coordi-nation related complications due to lack ofcommunication. To prevent these problems the recommendations suggested at the end of thisreport aims to improve the planning process through a properly fulfilledwalkthrough-planning of all of the construction activi¬ties during the time needed todo so. It is also suggested that the company uses experience from previous projects inorder to reduce costs, and that the qualifications of the employees is being appliedwhere it is needed.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.