In order for a judgement to be enforceable in another Member State, there is a certain requirement for an "intermediate? court procedure, a so-called exequatur procedure. An exequatur procedure is both expensive and time-consuming. The average cost of the procedure within the EU is 2 200 euro in a case without particular difficulties. In more complex cases, the cost of the procedure can be validated up to 12 700 euro.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This paper analyses the potential extent of labour mobility in the European Union after the eastern enlargement that took place in 2004, but focuses on movements from the 10 new member countries to the old EU -members. In this study, a number of economic models are used to investigate if there is a large potential for labour mobility in the enlarged EU and also if this potential has large effects on mobility in reality. The potential for labour mobility is, to a large extent, discussed in terms of theoretical migrating incitements for workers and different types of labour migration obstacles. Many factors indicate that such large potential for migration actually exists, mainly due to high difference in wages and unemployment and because of the common EU market. At the same time, the presence of natural and constructed obstacles is likely to restrict migration for a long period of time..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The Swedish potential of electricity production from roof mounted solar panels has been determined in three steps: accessing the existing roof top areas, simulating the amount of electricity solar panels can produce on these areas and finally analyzing how large the necessary economical change is to make the solar cells profitable.The total existing amount of roof top areas are 319 square kilometers and the area distribution follows the distribution of people. This leads to an installed power of 47,9 GW which are expected to produce 49,0 TWh electricity per year. If the quality of the electricity is prioritized the highest the power is reduced to 3,7 GW, generating 3,8 TWh yearly, but if the hosting capacity is calculated from Sweden?s total electricity need, the capacity is 42 TWh per year.Today, solar panels are not profitable in Sweden for houses, even though there is a subsidy of 35 % of the investment costs, discounted in 25 years. The profitability is calculated with a cost of capital of 5 %, a price on electricity of 1 SEK/kWh and an investment cost of 20 SEK/Wp.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

This thesis is about new technology in academic libraries in the form of Patron Driven Acquisition. As libraries take part in the digital era, a new model of patron driven acquisition has emerged. This model gives users more influence over the libraries electronic book collection. The collection development model changes libraries traditional role in the collection development process, from collecting for the future to the present.The purpose of this thesis is to gain knowledge of what acquisition librarians think about the effects of PDA on the collection, the acquisitions role and the cost structure. The theoretical framework relies on Christensen?s theory about disruptive technology and was used to interpret outcomes of new technology in libraries and its staff.Five librarians from four different Swedish university libraries were interviewed using a qualitative semi-structured method to carry out the investigative part of this thesis.

En sammanfattning av uppsatsen på maximalt 8000 tecken..

En sammanfattning av uppsatsen p・maximalt 8000 tecken..

Partner in a close company is taxed under special rules for private companies. This is to avoid a fiscal revenue conversion. Partner as having a major influence in the company and take out what is really earned income as dividends and thus be taxed at a significantly lower rate. The purpose of the close company rules is that a partner in labor income is taxed in the same way that an employee?s income.The problem that arises when one partner in a closely held company leave a shareholders contribution to the company which aims to raise the threshold for the shares discussed in this paper.

The aim of this thesis is to investigate the correlation between the price of electric power and investments within the Swedish basic industry. Using regression analysis, the authors test for correlation between the electricity prices and the basic industry, defined as the pulp and paper industry, the mining industry, the steel and metal industry and the basic chemical industry. Moreover, five variables found in the literature on investment decisions are being used as a means of comparison. The results suggest that the electricity price affects the investment decisions within the basic chemical industry as well as the steel and metal industry. On a more abstract level, this thesis contributes to the understanding of one of the properties of the Swedish GDP..

The purpose of the paper is to explore of what importance network relations are to the small fashion company Clemens en August. Clemens en August is a new German fashion label, which has the goal to become established in the high-end segment. The company uses an innovative sales strategy, directly distributing its products to the end costumer. The theories used will serve as a tool to analyze Clemens en August 's strategy from a network perspective. As the Bachelors thesis nr: 12464 ?Clemens en August ? A Network Perspective?, authors; Malin Elmlid, Biancastella De Angelis and Carsten Juldorf, date of approval 2006-01-11, contains delicate data about the studied company we have decided to classify it as secret.

Uppsatsen utreder ifall det finns en möjlighet till kostnadsbesparingar genom att erbjuda en stor andel av den äldre befolkningen hjälpmedel. Dessa hjälpmedel är tänkta att ha i förebyggande syfte för att minska antalet höftfrakturer. Perspektivet för analysen är samhällsekonomiskt, det vill säga alla möjligheter till kostnadsbesparingar antas tillkomma samma aktör. En uppdelning mellan landsting och kommun görs med andra ord inte. I en cost-benefit kalkyl görs en uträkning på vilken nettoeffekt som uppnås på den samhälleliga välfärden genom att antalet höftfrakturer minskar.En makroundersökning ligger till grund för de hjälpmedel som studeras.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.