This report presents the results of the tests of data rate and signal strength that I have conducted. The tests have been performed in the municipality of Arvidsjaur, Sweden. The report also contains the conclusions I have drawn from the results as well as an introduction to radio and the technology used in the nets that have been testedThe equipment used is:LG G2 cellphone used to test Telias 3GHuawei b593s-22 3G/4G router used to test Tele2s 3G/4GMobile Broadband Gateway R-90 used to test Net1s CDMAThe data rate has been tested with bredbandskollen (www.bredbandskollen.se). The signal strength(RSSI) has been read in the configuration menu of the broadband routers as well as in the cellphone.The conclussions drawn:Net1s net appears to be more used compared to its capacity than the other netsTele2s net has a high and even data rate where it?s signal strength is sufficient.

The purpose of this thesis was to study managers in the tourism market who works with internal marketing towards their personnel. A case study with two tourism providers, Hotel La-ponia and Mix Ranch, was performed. The cases were based on personal interviews with the hotel manager at Hotel Laponia and with the owner of Mix Ranch. The research questions were based on why tourist providers use internal marketing and how tourist providers use internal marketing. The findings were that it was regarded as very important to have moti-vated, satisfied, and properly trained personnel in this business because they are the ones who have direct communication with the clients and they are an important issue to help the com-pany to success.

Landscape architects has many ways of transforming our cities and landscapes. Traditionally, most attention has been put to visual qualities. Pen and paper are well established as the way to present proposals and to analyse in the landscape architects profession and training. But are we perhaps missing out on other ways of seeing the landscape? The purpose of this paper is to present sound as a tool of transformation. Sound in public spaces has long been treated just as noise and therefore unwanted.

I made this examination essay to investigate the possibilities and problems with machinery import. The rules intend to loaders and agriculture machines are still pretty flexible. It is today rather simple to make a registration or inspect those machines. There are still some practical problems to be aware of. It is very important to have the right contacts abroad, it is not always that you have time or moment to inspect the machines before purchase. In that case you have to trust your contact or partner about condition, equipment or working hours of the machine. Another important thing is payment before delivery: There is a huge risk that you do not get the machines that you paid for. If problems come up, you need to know the laws, your rights and your duties. A Swedish company does not pay any value-added taxes when it buys from another member of the European union. On the other hand must the machine be sold included value-added tax, if the buyer is a Swedish company.

The aim of this master thesis is to study if the websites of the Swedish public libraries are accessible to all people. According to the library law all people must have access to the public libraries and their information services. Today, when the Internet is one of the largest sources of information, it is important that all people, including those with different kind of disabilities, children, elderly, immigrants and people with old technical equipment, have access to the public libraries websites.We have in this study considered the graphic user interface, the language, the structure and the navigation possibilities at ten public library websites. We have from a checklist of our own, based upon the opinion of different experts such as Jacob Nielsen and Tommy Sundström, investigated the websites.The main finding of our study is that the websites are generally accessible even thou we found a lack of accessible for immigrants. Most of the websites had some pages in English, but none hade all pages in this language.

The purpose of this study was to investigate the teacher?s situation in the correctionaltreatment?s client education. The paper examined teachers? experiences of their professionalroles as well as their perception of the students? situation. The study wasbased on telephone interviews that were recorded and analyzed afterwards as well asan analysis of texts that affect the teachers? work.

Skådespelaryrket kräver mycket av en människa både intellektuellt, färdighetsmässigt och fysiskt. Det förväntas också ofta av en skådespelare att vara musikalisk. Musikalitet kan yttra sig på olika sätt. I skådespelarsammanhang vill jag påstå att musikalitet kan finnas i allt från texthantering till hur man rör sin kropp. Jag är rytmikpedagog, men har också arbetat som skådespelare.

Statistics of occupational injuries show that bricklayers are among the most exposed, with heavy lifting by far the most common cause of long-term sick leave. Prefabricated brick beams create yet another risk of injuries that can be prevented by auxiliary equipment or alternative solutions. From articles, interviews with masons and from a survey carried out in conjunction with this report, it appears that there are frequently difficulties in the use of available means for lifting and handling. Previous studies on the subject of transverse reinforcement in masonry beams indicate a viable method for bridging large openings in masonry walls. This bachelor thesis delves into whether the idea could be realized in today's brick construction with a view to improving occupational health and safety.

Arbetet är ett utredningsarbete som går ut på att försöka lokalisera felkällor och göra förbättringar på en testutrustning som mäter rodervinklar på akterdelen på en robot. Rapporten innehåller en översiktlig bild över den tidigare metoden och dess felkällor som hittas vid test av den tidigare metoden. Utredningen utmanar också många utav antagandena som är gjorda för beräkningarna av den tidigare metoden. Detta utförs för att kunna bekräfta eller dementera antagandena. Detta görs i form av matematiska modeller som testar olika delar av metoden.

In 2010 there will be a political resolution to ensure that the Swedish society is accessible to all citizens including people with disabilities. For this purpose a national action plan for disability policy "From patient to citizen" (Govt. Bill 1999/2000:79) has been set out with the aim of ensuring that the disability perspective will permeate every sector of society and that the approach and response to people with disabilities will be improved. The Swedish National Council for Cultural Affairs is responsible for implementing the disability policy in the cultural sector.Since public libraries in Sweden are a part of the public cultural sector, they will also be affected by the political resolution regarding accessibility. The concept underpinning library services for disabled people must be that of equality of access.

The study concerns the unloading of pigs at the slaughter house, both from the pigs view and from the transporters view. The study has been carried out at the slaughter house (SLP) in Helsingborg, Sweden. It includes a questionnaire to all transporters (65 % response) and a direct observation of the unloading. The transporters handling of the pigs, their use of different equipment and the response of the pigs has been studied. The pigs behaviour at unloading and their reactions to environmental factors has also been studied.

To make your company change from a conventional workflow to an ICC-based workflow you need tomake investments in time and money. On the other hand you get your reward in terms of a stable andquality safe production. To choose this way of adjusting your company to new routines requires accuracyas well as a great deal of commitment. It is not only about having the right equipment. There area lot of factors that affect the quality of production.Our ambition with this report is to bring out the importance of general thinking when it comes toICC-profiling and to discuss on which basis printing profiles should be created.

The purpose of this report is to evaluate different methods for identifying states in robot models. Both linear and non-linear filters exist among these methods and are compared to each other. Advantages, disadvantages and problems that can occur during tuning and running are presented. Additional measurements from accelerometers are added and their use with above mentioned methods for state estimation is evaluated. The evaluation of methods in this report is mainly based on simulations in Matlab, even though some experiments have been performed on laboratory equipment.The conclusion indicates that simple non-linear models with few states can be more accurately estimated with a Kalman filter than with an extended Kalman filter, as long as only linear measurements are used.

This report presents the results of the tests of data rate and signal strength that I have conducted. The tests have been performed in the municipality of Arvidsjaur, Sweden. The report also contains the conclusions I have drawn from the results as well as an introduction to radio and the technology used in the nets that have been testedThe equipment used is:LG G2 cellphone used to test Telias 3GHuawei b593s-22 3G/4G router used to test Tele2s 3G/4GMobile Broadband Gateway R-90 used to test Net1s CDMAThe data rate has been tested with bredbandskollen (www.bredbandskollen.se). The signal strength(RSSI) has been read in the configuration menu of the broadband routers as well as in the cellphone.The conclussions drawn:Net1s net appears to be more used compared to its capacity than the other netsTele2s net has a high and even data rate where it?s signal strength is sufficient.

This thesis aims to develop proposals and models for a modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.