Firewalls protect network traffic and decide witch traffic to send further and witch traffic will be blocked. All this depends on the rules in the firewall. The firewall is installed between the internal network and the Internet. It is difficult to find a firewall that can protect us against different threats. Firewalls have both advantages and disadvantages and all this make them vulnerable.

Computational techniques have transformed the journalistic approach. Journalists now have the opportunity to integrate user-statistics from the news website with their work. Singer (2011) argues that journalists seem particularly afraid of items, which they perceive as trivial or otherwise unsavory, will prove popular - potentially creating management pressures to produce more of those stories. She describes this practice as ??traffic whoring??.

The main environmental problem for aviation is the great amount of exhaust gases, mainly nitrogen oxides, carbon monoxide, carbon dioxide and hydrocarbons - mostly "greenhouse gases" leading to climate changes. I decided to sort out what is being done to decrease these problems and what regulations there are concerning air pollution by the means of searching the internet and using publications from aviation authorities for current figures. I chose to scrutinize authorities on political, authority and company level, resulting in summarizing the work of UN and EU respectively, ICAO (International Civil Aviation Organization), JAA (Joint Aviation Authorities) and LFV (Swedish Civil Aviation Authority), and finally SAS, representing the airline companies. Conclusion that I have drawn are thatthere are regulations for air pollution, written down in ICAO's Annex 16, that are to be followed. Secondly, LFV are environmentally controlling their nineteen airports and since economy is an important reason for not giving priority to environmental issues in aviation emission charge and noise charge are added to the landing fees.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Automatic milking systems (AMS) provide the opportunity for less manual labour and an increased milking frequency. But in order to reach an optimal milking frequency a well-functioning cow traffic is crucial. There are many factors affecting cow traffic but one factor that has not been studied thoroughly yet is the effect of different light intensities during the night, 22.00 h to 05.00 h. Therefore the aim of this study was to determine the effect of different light intensities during the night on number of selection gate passages (GP), milking frequency and milk yield. The study was conducted as a Latin square were three light intensities were applied: LOW (11 ± 3 lux), INT (33 ± 1 lux) and HIGH (74 ± 6 lux), in three different herds.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

The purpose of this essay is to study and compare the air traffic with the train traffic between Gothenburg ? Stockholm. The study is based on three different perspectives: travelling time, travelling cost and the environmental effects. With those three factors included in the study, it will be more useful to determine if the unnecessary travel exist.This essay is based on quantitative information which has been gathered from the booking system of the train- and airline company?s websites.

Two of the main approach roads into the city of Enköping are Salavägen and Stockholmsvägen. They are connected to each other through the street Bangårdsgatan in the roundabout Salatullen and crossing Fannakorset, respectively. These crossings are from time to time heavily loaded, which is why the municipality plan for a new street in parallel to Bangårdsgatan. The traffic will then be spread out and is thereby reducing the density. The new street is actually an extension of the existing Mästergatan, a side street to Salavägen, to the east and connecting it to Stockholmsvägen or a street nearby.The purpose of this Master thesis is to show how the new street can be drawn in order to discharge the traffic in the area between the roundabout Salatullen and the crossing Fannakorset.

There is always a need for more effective ways to store energy in order to reduce the human impact on the environment. One step on the way can be the use of flywheels as kinetic energy storage devices. Low frictional losses are essential for a flywheel to be effective. To minimize these losses active magnetic bearings (AMB) can be used to keep the shaft centered instead of the more conventional ball-bearings. AMBs use actuators and a fast control system that needs correct and noise-free measurement data of the shaft position and the current in the actuators to work properly.This thesis explains the process of constructing power electronics and a current measurement system for active magnetic bearings (AMB).

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

In Sweden the most common type of road traffic accidents involving passenger cars are single accidents (where only one vehicle is involved). The aim of this thesis is to analyse how these accidents occur, and present recommendations on how to reduce the number of deaths. Data has been collected from the Swedish Transport Administration?s in-depth studies of fatal accidents. Road traffic accidents with fatal outcome that happened on public roads during the years 2007 to 2009 have been studied.

Tycho Hedéns Väg in Uppsala has evolved from being a through fare passage and highwayto the oversized road frame running through the city it is today. At the present time, dueto the relocation of the E4 highway east of Uppsala, Tycho Hedéns road creates a barrierbetween the north eastern area of Uppsala and the remaining parts of the city centre. Theroad is designed to endure heavy traffic and high speed limits, generating a surrounding urbanarea were inhabitants are complied to follow the standards set for a high traffic-accessibleenvironment. Furthermore, the heavy traffic has led to the turning of both urban roadsidesaway from the actual road. The aim of this project and proposal is to show the possibilities ofhow the innate features of Tycho Hedéns road can be used more advantageously to mend thecity area of Uppsala.

Performance of an intersection affects the total travel time in a traffic network. An intersection with good performance can easily be described by its contribution to lower travel time than in a comparable intersection. The travel time is of importance in the cost calculations when a specific intersection is to be chosen and designed. It is important to be able to make correct and precise performance calculations so that the cost calculations will not be incorrect. For that purpose the software Capcal, which is a traffic model for intersection analysis on performance, is used in Sweden.