A rhetorical analysis of the educational interactive film ?Riskprofilen?, produced by the Swedish Civil Contingencies Agency (Swedish: Myndigheten för Samhällsskydd och Beredskap). This essay uses the theories and methods of Procedural Rhetoric, as described by Professor Ian Bogost, and Visual Rhetoric, as described by Professor Brigitte Mral to analyse the interactive and visual component parts of the artefact, and compares them to the intended purposes of the artefact as stated by documents pertaining to its creation, found to be those of educating the public; marketing the agency; and driving traffic to its webpage. The artefact is through analysis found to fulfil the purposes of marketing the Agency and of likely increasing traffic to the website upon which it is hosted. Regarding the primary, educational purpose this analysis finds that the artefact does not teach a user the accident-avoidance strategies it claims to do, but is dependent upon further materials..

The public interest in central living in today?s cities has led to an increasing effect of traffic noise pollution, and today 20% of the inhabitants in Sweden suffer from noise a level that exceeds the limits. At the same time the traffic keeps increasing, and recent researches shows that traffic noise pollution and several of today?s most common health issues are connected, for example, reduction of performance, sleeping issues and cardiovascular diseases. For this cause rules, guidelines and environmental goals has been developed, as well as software?s which calculates the levels of pollution, all this to investigate and improve the environment.

Detta arbete har utförts för att undersöka frågeställningen ?Hur bör ett dataspels tutorial designas för att spelaren ska lära sig samtidigt som den främjar uppkomsten av flow??. För att besvara detta har teorier inom pedagogik, lärande av spel, användbarhet och flow samt mer generella teorier kring spel studerats för att skapa en teoribildning inom området. För att testa detta har ett spel med två olika tutorials skapats. Detta spel har sedan använts för att, med hjälp av två testgrupper, samla data om hur spelare lär sig samt deras flowupplevelse.

Detta arbete syftar till att undersöka hur Csikszentmihalyis teorier kring optimala upplevelser, eller flow-upplevelser, kan appliceras på praktisk speldesign. I arbetet kombineras Csikszentmihalyis definition av begreppet flow med Jenova Chens riktlinjer för flow-uppmuntrande design i singleplayerspel för att ge underlag för framtagandet av ett brädspel i vilket applicerbarheten hos deras teorier och riktlinjer på multiplayerspel undersökts. För att teorierna och riktlinjerna effektivt skulle kunna undersökas utvecklades det tre olika versioner av brädspelet som alla innehåller olika element som, enligt Csikszentmihaly och Chen, bör alstra flow. Ett flertal spelgrupper fick spela dessa tre versioner och via enkätundersökningar och intervjuer förmedla hur de upplevde de olika versionerna, både som individuella produkter och i jämförelse med varandra. De data som erhålldes från dessa undersökningar indikerade på att nivån av kontroll spelaren har över sin spelsituation spelar en väldigt avgörande roll i hur han eller hon upplever spelaktiviteten i sin helhet..

Logistics is an important concept in the organizational context in which the planning of flows, services and products are treated. Logistics handles supplier management, supply of materials, production and distribution. The distribution of goods can be managed with different types of transportation depending on price and time aspects. The lowest transport cost for larger amount of goods is by maritime shipping. A common carrier used in transportation of goods is a standardized ISO- container.

Emhart Glass is the world?s leading manufacturer of equipment, controls and components to the glass container industry. The goal of this project has been to identify improvements and propose cost saving solutions when moving one of Emhart Glass work cells in Sundsvall. The changes shall result in improved work environment and increased product quality. The method contains value stream mapping, concept selection and P-FMEA and complies with Emhart Glass goal to become a more Lean focused business.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

The purpose of this essay is to study and compare the air traffic with the train traffic between Gothenburg ? Stockholm. The study is based on three different perspectives: travelling time, travelling cost and the environmental effects. With those three factors included in the study, it will be more useful to determine if the unnecessary travel exist.This essay is based on quantitative information which has been gathered from the booking system of the train- and airline company?s websites.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

There are two groups of haulage contractors in roundwood transport , those who are contracted direct by the transport buyer and those who are connected to a freight company which in its turn is contracted by the transport buyer. Today the roundwood haulage is dominated by contractors with one to two lorries. The effort of coordinating transportation for a transport buyer is dependent on how many communication contacts that must be managed (how many individual haulage contractors the transport buyer has to work with). A structural change in the sector that leads to a decrease in the number of haulage contractors but an increase in the capacity of each contractor, makes it possible for a transport buyer to coordinate transports with fewer communication contacts. The reason why a company reaches a certain size can be explained by the number of contracts it makes and manages.

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

This project investigates how team sports can be used to include young women in public space aswell as how through the addition of a sporting facility adjacent to three schools can be used as a stepping stone for the young people of Dharavi to have a chance at a brighter future..