In Sweden the breeding organization for the Swedish Warmblood horse uses a traditional scoring system when evaluating horses. The horse is scored subjectively in relation to how good each trait is in relation to the breeding objective. Other countries, for example the Netherlands, instead use a linear scoring system. The linear scoring system evaluates the horse on a scale between two, for the breed, biological extremes which makes the evaluation more objective since the judges personal values does not influence as much. The breeding organization for the Swedish Warmblood is today planning a change towards a linear scoring system.

The aim of this essay is to investigate whether the role of the teacher and the teaching in the classroom is affected when the Ipad is introduced in an one-to-one situation, and if so how these effects occur. Previous research show that the introduction of new technology in education offers hope of a more effective way of learning but that this at the same time leads to challenges for traditional ways of teaching and traditional views on knowledge (Säljö & Linderoth (red.) 2009, Erixon (red.) 2014).The method used is a qualitative interview in combination with observations used as a complement to the interviews. Four teachers working on an upper secondary school have been interviewed and one lesson in English taught as a foreign language and one lesson in social science have been observed.The results show that the use of Ipad changes how the teachers relate to and use the teaching material, as all material can be gathered in the Ipad and accessed at all times and can also be shared with the pupils. The Ipad also makes it easier for the teachers to offer pupils individual instructions which the teachers view as positive. In addition, the Ipad enables a change in regards to the pupils as they switch from being users to becoming producers in the use of the Ipad which in the teachers? opinions offers more profound ways of learning..

The purpose of this Master's thesis is to examine whether a web-based library catalogue is to be considered user-friendly. We have examined this from a user-perspective by interviewing users of a web-based catalogue at a public library. In order to get a picture of the user-friendliness of a catalogue, the thesis is centred upon the following questions: How is a web-based catalogue used? What problems do the users experience? How is the catalogue perceived by its users? Since the producers of these catalogues now are taking into account the research upon human-computer interaction, we are also interested in finding out whether a web-based catalogue is more user-friendly than a more traditional OPAC. We do this by comparing the results of our examination with earlier studies of OPAC use.

The purpose of this essay is to examine the impact on children playing at a preschool yard that is designed with traditional playground equipment, and a nature-like yard without traditional playground equipment. How these respective environments influence children?s play, which other factors in the external environment that affect the game and whether the theories in the literature correspond with the results were important questions for the essay. To answer these questions a case study was applied onto two specific preschool centers, both located in Malmö. Through literature studies, inventories, observations and interviews with staff and children, a picture become clear of how the children use the yard and how their play is affected by the design of it.

This report contains a degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

What is discussed here are the events taking place in Sweden in 1885, a turbulent year in Swedish art history. It is shown how the conception of Swedish art, in creating a Swedish identity in art, was expanded.  Two exhibitions were analyzed, Akademiens för de fria konsterna Jubileumsutställning and Opponenternas utställning. While the artists exhibiting at the Academy were using traditional strategies and thechniques, several artists at Opponenterna, were using modern techniques they had learned outside the Academy, mostly in France. These techniques were: experimenting with perspective and the use of empty spaces in mediating ambiance. The third strategy was that of individualization by moving closer to the motif.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

Principles that guide how a classification system should be structured have existed for more than a century. Traditional classification principles can be of great value for the design of classification schemes directories on the web. However, there are differences between the library context in which these principles originated, and the web. This thesis aims at investigating how changes in the context of classification affect the application of traditional principles of classification on the web. Another purpose is to see what implications this has for the design of classification schemes on the web.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

Uppsats för avläggande av filosofie masterexamen i kulturvård, 30 hp.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

The blog has become a widely discussed subject, but while marketers do invest in blogs, there is little evidence on the how the blog works as a marketing tool. Therefore, we thought it would be interesting to create a greater understanding of the blog's potential communication effects. To demonstrate the potential of the blog in comparison with more traditional media, we decided to compare the communication effects achieved by a blog with those achieved by an online magazine. We pursued an experiment where we exposed an identical text about a brand to respondents in seven blogs and in seven online papers and measured the resulting communication effects in terms of attitudes and intentions towards the exposed brand. The quantitative study showed that the blog in some basic aspects works as a more traditional media; when the consumer forms positive attitudes toward a text in a blog, the attitude spills over to the attitude toward the brand, with higher buying and w-o-m intentions as a consequence.

Generally in Macedonia keeping farm records and farm business planning is not often practiced like an ordinary activity in farming. Therefore one of the crucial things to do it is to comprise and continuously practice record keeping of farm data. The efficient and justified farm business planning should be based on farm records about the previous work of the farm, which will bring a structured approach for planning all the activities, as well as provide a good basis for attracting investors and creditors for the additional expansion of the business.Given that sheep breeding holds an important part of the livestock production in Macedonia, there is a need for adding analytical sheep enterprise budgets to support the farm business planning process at sheep farms.The aim of this research was to develop sheep enterprise budgets created on the best production practice for Macedonian conditions of breeding and test their applicability into the farm business plan model Agriwise Macedonia. The sheep budgets were composed with a process of data collecting consisted of direct farm data (for the cases), expert's consultation and relevant desk research, as well as a literature study. The aim of doing it was to attain more accurate calculations of the enterprise budgets, which will result in a more precise outcome in the farm business plan model Agriwise Macedonia.