An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

I have been inspired by the Do It Yourself movement. DIY builds on the creativity of the individual, one?s capacity for initiative and one?s desire to realise one?s ideas. I have been inspired by sheets of pattern paper used in the manufacture of clothing, and my line of furniture is based on two-dimensional patterns of furniture. The sections of the pieces of furniture are printed on and relate to a standard sheet of plywood.

The consumer of today is bombarded by an increasing number of commercial messages, which makes it harder and harder for brands to cut through the clutter. Because of this, new methods are developed and introduced to the market every day. One of the most widely discussed of these methods is guerrilla advertising. Even though the method has received numerous praises there are not any academic proofs supporting these arguments. The authors, of this thesis, have examined if guerrilla advertising is more or less effective compared to traditional advertising and what the reasons for the result are.

This project includes a small study of Västerås city's housing needs, and a proposal on theuse of the property 1:207, Lantmännens silo in the Eastern Harbour, Västerås.The project intends to produce a basic study of the useful systems for this rebuilding projectwith regards to sustainable development and energy saving light buildings.The end result, which consists of a detailed visualization of the proposal, intends to becomean iconic natural focus for the Eastern port of Västerås and an example of the use andadaptation of existing structures.The property must also link the eastern parts of Västerås with the center through anextension of Mälarleden.The work has been performed through literature studies, site visits, contacts with the City ofVästerås and by calculations.The proposal consists of architectural proposals drawings and visualizations.Furthermore, a suggestion is given of how the property can be used and fitted into theoverall plan for urban density development currently underway in the city of Västerås.Computer programs used have been Microsoft Office Excel, AutoCAD and ArchiCAD..

The tourism industry in Sweden has expanded in recent years and the increasing industry has meant that customers are in need of a reseller for their trips abroad. Today there are three types of retailers available. These are : Traditional travel agencies , tour operators and online travel agencies.Online Travel agencies are the most modern online option for customers. Their existence has made it easier for the customer and reservation can be made anytime and anywhere. The competition has intensified between the three retailers and the traditional alternatives must find new ways to survive.

The goal with my project was to explore what it is that distinguishes Berlin as a city and then translate that into abstract patterns. The patterns are made for wallpaper and are presented in a book as a collection.After spending six months almost constantly abroad visiting many different citys I began to wonder what it is that makes a city unique. Sometimes it feels as though cities are reduced to the sum of their famous sights. But of course a city is more than that. It?s the people who live in it, the history, architecture and culture.

This is a project about learning from an experience, about trying to have fun and not getting overwhelmed and draining your work. The thing that wraps this whole experience together is the making of a book. The purpose of making the book has been to bring two interests together, illustration and graphic design.The content of the book for this graduation project is written by Fredrik Mårtensson. His poetry tells about the unnatural state of the modern society. I have interpreted the poetry in six abstract illustrations that I made digitally, with the intent to maintain the feeling of something organic.The process of making this book is a lot about learning what it actually takes to finish it, about trying to tell something and a lot about experience practical work..

The 1990s were one of the most profitable periods for European airline companies, mainly because of development of world economy and increasing globalisation trends. However, towards the end of the decade, a global economic downturn, high oil prices and new forms of competition turned the industry towards troubled times. The European air-travel industry had to face and accept the new airline business concept, called low-cost or no-frill airlines. In these conditions, traditional airlines had to rethink their strategies and question the old business model. As a response to the competition, European traditional full-service airlines formed alliances or networks to expand the route network and to increase efficiency.

The aim of this study has been to investigate the significance of the newly started project Vimmerbymodellen for unaccompanied young refugees. This regarding to how the unaccompanied young refugees are participating in creating networks and meeting points in the local community. Vimmerbymodellen is described as an integration project where the nonprofit sector collaborates with the municipality. The empirical material has been collected through semi-structured qualitative interviews where five unaccompanied young refugees and four involved adults have been interviewed. The empirical material from these interviews has thereafter been analyzed through the concept of social capital, identity and empowerment.The main result of this study shows that participation in the project is expected to contribute to the creation of networks and meeting points which has significance for unaccompanied young refugees.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

In order to be a good teacher according to preferences from outside the school area, there are many different voices to listen to. The different roles that are assigned for teachers are colliding with the latest research from the pedagogical institutions and therefore the role as a teacher of today is in a complex state of mind. Somewhere, between the traditional role of teaching and the moderating ideal image, reality is revealed in the ambivalent role of the teacher of today. In this pedagogical essay on advanced level we are focusing on obstacles that are hindering the moderating teacher?s role, to be fully developed in the classroom.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

During spring 2007, I Matilda Lindblom, undertook my Bachelor Degree project in Furniture Design. The supervisors were Agneta Stake at Nola in Stockholm and Leo Jóhannsson, teacher and examiner at Carl Malmsten CTD in Stockholm.The project was based on three elements:? Cooperate together with a producer for professional supervision? Learn to work from a given design brief.? To learn more about industrial production? Learn more about furniture for public areasI contacted a furniture producer called Nola AB, in Stockholm, who became my work partner during this project. The asked me to design a piece of furniture where you can sit and work with a laptop on. The target was for public areas, for example in parks, malls, or at airports.In cooperation with Nola, my ambition was to develop this piece of furniture that was the answers on their wishes and demands.

Kulturvårdscentrum was a project that had great significance for local folklore societies in Bohuslän.Bohusläns museum was i charge of the project that lasted from 1987 until about 2001 when most ofthe original staff have retired. The staff was mainly recruited from a large shipyard, Uddevallavarvet,at it's closure due to recession. Financing was largely made by the government to help outthose unemployed who otherwise should have a hard time finding a new job. At start there was about25 employees who where trained for one year by staff from Swedish museums, conservation studios,and teachers the university. The education was aimed at serving local folklore societies, and dealingwith their special problems.

This report is about intranets and SharePoint. It explains how user?s expectations can affect an implementation of an intranet and what companies want to get out of an intranet. It?s also about risks that may occur when an intranet is developed and how to avoid these problems.SharePoint is a collaborative platform and publishing system from Microsoft that assists developers in the implementation of an intranet.