The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

New technological innovations like tablets and smartphones have a taken significant market share on the web and puts new demands on webpages, the user interface and compatibility among different client devices. The full test of a web-based system prior to the publication is often regarded as an important part of the process to create a complete and successful website. This bachelor thesis investigates the possibility to analyze mobile-adapted web sites using a system that first records the visitor's activities and then replays them for an expert analyst to provide valuable information to developers about how their site can be improved.The essay begins with a litterature study on today's most common web development tools and then examines the possibility to apply them during the development of the analysis tool. The work also describes two methods, pair programming and waterfall method used during the project. Three different evaluation methods are presented and one of the models is applied on the finished system.The project results in a web-based analysis tool written mainly in JavaScript using the jQuery library.

When rubber equipment in a milking system ages, physical and chemical deterioration occurs and cracks, crevices, as well as deposits of organic and inorganic material is formed on the surface. Bacterial colonization can accumulate, especially on ageing rubber equipment and if the cleaning procedure is not functioning properly. Formation of biofilm in milking equipment could in turn cause bacterial contamination of bulk tank milk. ATP bioluminescence is a fast and easy way to determine the hygienic status of a surface based on its ATP content, and results are given in relative light units (RLU). The method measures both bacterial contamination as well as residues from other organic material.

This thesis work resulted in a template for how the thermal spray process can be controlled through robot programs. The robots today and their programs need to be replaced, therefore a new structure which can be matched with the new robot systems is needed. The work is limited to only concern structured programming on the new robots on Thermal Spray Centre (TC) with the programming language Rapid. The basic data for the program was retrieved from interviews with concerned personnel at TC, from studies on process parameters for thermal spray and from existing specifications at Volvo Aero Corporation (VAC). The thesis work briefly describes the process thermal spray and the four methods used at VAC.

This study examines the use of building modeling and energy simulations in the design process  of  a  building.  The  take-off  point  is  the  notion  of  energy  simulations  being needed early and throughout the building design process, and that the lack of energy simulations may be explained by the fact that they are time consuming and therefore often too expensive. A greater interoperability between software tools used by relevant disciplines,  such  as  the  architect  and  the  energy  specialist,  would  create  smoother workflows, which would reduce this cost and open up for more frequent and iterative energy  simulation  processes.  The  study  is  an  assessment  of  the  modeling  tool  Revit and  the  simulation  tool  Virtual  Environment  and  whether  they  can  create  smoother workflows, and make leeway for a more frequent use of energy simulations throughout the  design  process.  It  also  investigates  the  limitations  of  what  can  be  examined  by simulations in Virtual Environment. This will hopefully help clarify the future role of energy  simulations  in  design  processes.  The  method  is  a  trial  by  error  approach  of testing the two software tools by building and simulating a model. The results of these tests  show  that  the  workflow  is  not  optimal  (and  therefore  time  consuming)  for frequent  and  iterative simulations  throughout the  design  process,  but  it  also  reveals some  great  possibilities  of  what  can  be  performed  with  these  two  powerful  tools  at hand.  Further  development  with  regards  on  platform  independency  of  the  building information  model,  including  seamless  exporting  and  importing,  seems  necessary  to strengthen the future role of energy simulations..

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test data compression method based on a modified facsimile code.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

Enligt Socialstyrelsens föreskrifter om ledningssystem för kvalitet och patientsäkerhet i hälso- och sjukvården, SOSFS 2005:12, krävs det av vårdgivaren att denne arbetar efter mål. Att formulera mål inom hälso- och sjukvården kräver eftertanke. Målen måste vara mätbara och inkludera flera olika delar av verksamheten. Varje förbättringsprojekt är unikt och bör relateras till de resurser som avsatts. Ett stort problem vid kontinuerlig uppföljning är att välja ut parametrar som ger tillräcklig information och är lätta att skapa.

This essay examines pull-out strength of threaded rods fixed into glulam timber. The technology is intended to be used in hidden joints between glulam components. The work began with a study of literature focusing on current research within the topic, mainly to create a base of knowledge before the testing was initiated. Studies of scientific articles reveals a lack of research within this area, which makes it difficult to develop standards and calculation models for these joints. The drill holes in the tests have a diameter of 7 mm.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

ABSTRACTThe aim of the observation study was to examine the dental hygienists working tasks and the time they used carrying them out. Four dental hygienists where observed during four days each. The total time the dental hygienists used with patients during sixteen fulltime days come to a sum of 89 hours of the possible 111 hours. Twelve hours was late cancels and time when patients didn?t come to their appointment and ten hours were used for meetings.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

This report presents the development process of a mobile interface for the C2-monitor. A monitoring tool used to support the operations for the broadcasting services of Ericsson Broadcasting and Media Services (EBMS). With the support of the C2-monitor, operators can monitor hundreds of channels and services produced from EBMS. To enhance a more flexible working environment, the C2-monitor needs to be developed further to support mobile devices with a customized design to take advantage of mobile phones features and functionality. Established and well-recognized design methods and principles have been applied in the development process and user testing have been made iteratively throughout the project.