Glulam?s position at the Swedish market for building constructions has been established over the past decades. Factors affecting glulam demand are found both in global and national contexts as well in customer attitudes and knowledge of the material. Arguments for environmentally friendly and sustainable construction processes and energy-efficient designs are nowadays common, which is something that should motivate increased usage of wood as a renewable material. For the glulam industry to increase its sales, improve profitability and thereby gain market share in present competitive climate, reliable market information and updated market intelligence is required.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

Background: Infectious Diseases Institute points out that the potential of various viraldiseases possibly can block each other. It is said that the virus that causes common cold,Rhinovirus, may have saved many people from the flu. If this assumption proves true, itwould explain why some viral diseases in some countries have been slow to take off and pointto a new way to struggle influenza. Objective: The main purpose of this study, based onreported cases of RSV and influenza type A, type B and H1N1, investigate whether viraldiseases can block each other, i.e. difficult season of flu may delay and / or mitigate thespread of RSV in Sweden.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

The purpose of this thesis has been to assess whether leaching from one particular Swedishlandfill site, Skörbytippen, is contributing to elevated levels of heavy metals in a ditch runningfrom the landfill site to the lake Mälaren in the communal region of Håbo kommun. Since theditch is stretching approximately five km downstream from the landfill site, in situ observationsand maps with known points of inflow was utilized to determine appropriate test points for thecollection of samples.Soil, water and sediment samples were collected and analyzed for content of organic material, pHand conductivity. Data on plant-available elements and total amounts of heavy metals wasacquired through ICP-analysis.The results show that the Skörby landfill is currently in the methane-forming anaerobedevelopment phase, which indicates that the concentration of free and complex-bound metals inthe leachate water should be low due to chemical binding with other landfill compounds. The pHof the sediment samples was generally one unit higher than the soil samples and some of themeasured data, such as pH and conductivity, show that an environmentally disturbing dischargeof some kind of strongly alkaline chemical(s) has been made from Benders? takpanneindustri inclose proximity to the landfill.

Energy is an important issue in the current world which significantly affects sustainability and development. Energy generation and use are major sources of CO2 emissions which is one of the most important driving factors in global climate changes. The amount of energy used in house hold section can lead to estimation of the amount of CO2 emitted within this section which subsequently would be a ground to better management and maintaining a sustainable society. This study which is a bachelor?s project in sustainable energy, deals with estimation of CO2 emission from different types of residential houses in Sweden. An extensive literature review on energy use in Sweden by different residential sectors has been conducted.

The purpose of this paper is to present and analyze the yearly expenses for Swedish rental apartments during the period 1999 to 2007. At the end, it will give the reader a general picture of how the cost-level has fluctuated depending on the production year when the apartment building was finished, and where the same building is located. This paper has the following questions as a starting point:- Can there be an identification of regions depending on where people tend to favor renting an apartment?- How are those regions distributed? That is, where are the cost-levels of the yearly rental expenses highest and where are the levels lowest?Nine statistical surveys from the Swedish government agency Statistics Sweden (Statistiska Centralbyrån) have been used as primary sources for this paper. These surveys deal with price pictures of housing in general, but for this paper the only information that has been used is the one about rental apartments.

There is currently no activity or behavior meters validated for sows under Swedish conditions where the sows are loose-housed during farrowing and nursing. An activity meter could in particular be used to detect sows that are getting ready for farrowing. Assistive technology in order to register different behaviors would be extremely useful in research and breeding. In this study, a HOBO Pendant G data logger was validated for two different functions. First, the function as a pure activity meter in which the accelerometer's ability to detect an upcoming farrowing was evaluated, and second, the accelerometer's ability to distinguish between the behaviors standing up, sitting down, lying ventrally and lying laterally on the right and left sides was evaluated. The accelerometer was attached to a collar around the sow's neck, and was recording its location every two seconds for six hours a day for ten days on a total of twelve sows.

The globalization that has occurred during the last few years has made it more important for companies to have a well-functioning logistics system. Customers demand more options, which lead to an increased flow that creates greater demand regarding packaging and transports. Diverse logistics costs are nowadays a substantial cost for many companies. Therefore, more effort is aimed at optimizing transportation to lower these costs.The purpose of this project is to create a user-friendly calculation of logistics costs that illustrates how the costs vary, depending on how the flow is structured. This is done by examining which aspects that affect the total logistics costs and by mapping which aspects that should be included in a calculation of the logistics costs.Literature studies have been carried out parallel with empirical studies at Scania's production unit, MC, in Oskarshamn.

Frigoscandia Freezer AB have seen themselves as an entrepreneur company for a long time, but have lately begun to realise that they have to go against a more administrative era. With that insight they have begun to examine their enterprise in order to achieve this. The division Team Spare Parts has started a project with the intention of checking-up the inventory management, and improving it for the future. To get support for this and other point of views, they decided to let us do our exam thesis as a part of the project.The first part of the thesis deals with the appropriate inventory theory. All calculations in the other parts of the thesis have been based upon this.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

The Swedish model for developing the national infrastructure is based on increasing the cooperation between municipalities, government and businesses. The method to establish the infrastructure in Sweden is the geodatastrategin. The effort to implement the geodatastrategin has resulted in an interaction model, Geodatasamverkan. The purpose of this study is to alert municipalities and to investigate the usefulness of their participation in Geodatasamverkan. The study also presents examples of different applications where geodata can be used within a municipality. The report is based on literature reviews, surveys and interviews. Online Surveys were sent to some of Sweden's municipalities to get an overall idea of ??how they make use of geodata and their general attitude towards Geodatasamverkan.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

This project investigated how elevation and vegetation type influences variation in plant litter phenolic content and protein precipitation capacity among and within common plant species for two different vegetation types, heath and meadow, in a subarctic ecosystem in the Abisko region of northern Sweden. As nutrient availability generally decreases with increasing elevation as a result of decreasing temperature, I hypothesised that phenolic content would increase with elevation and be higher on the heath than the meadow. To test this, the total phenolic content and protein precipitation capacity was estimated in leaf litter from 13 species in both heath and meadow vegetation across an elevational gradient ranging from 500 to 1000 meters above sea level (m.a.s.l.) in the study region. The results showed that elevation and vegetation type both had a strong impact on both variables. Total phenolic concentrations decreased with elevation for the meadow, and were greater for the heath than the meadow.