This report will show the energy usage of Hotel Princess in Sandviken, Sweden. When the hotel changed owner an examination of the hotels heating, ventilation and sanitary systems were done. The report showed flaws in the ventilation system, and is why the new owner wanted a closer look at the energy use of the hotel. The original building was built in the 1930s and two major extensions have been built, one in the 1950s and the most recent in the 1980s. An assumption made is that the building parts were built to the restrictions during the time. Activities on the hotel include sleep over, conference, night club, massage and swimming in the hotels pool section.

This report is a commission from the Care Unit of Hässleholm municipal. The purpose is to illuminate what is distinguish for contact persons at sheltered housing in the Municipal of Hässleholm? It contains three questions at issue. What are the expectations of the contact men? What information is given? How is communication between the professional categories working out?The report also contains a background with a brief Swedish history in care of older people.

The intent with this paper is to investigate the medieval habitation in central Old Uppsala. This time-period has over the years been neglected. Therefore I wish to summarize and ana-lyze the medieval habitation to see what can be said about its continuity, and also to investi-gate why it is located in certain areas.Due to the amount of source material I have limited my investigation area to the central Old Uppsala. It is possible that this limitation will affect the result of the research but without the limitations the investigation area would have been too large to handle.The source material has been collected from excavation reports and the summarized. My theory is material culture and material agency.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

Environment friendly transports are one of the main topics in the industry and society today.Shell organizes an annual university competition called Shell Eco Marathon. The goal is to buildthe car that consumes the least fuel during a race. KTH participated for the first time in 2006.The engine for this competition, DoubleTwo, has been developed within the school. Theprinciple is a two stroke counter piston HCCI engine with variable compression ratio. HCCIstands for homogenous charge compression ignition.

Abstract Over the years the consciousness of risk has grown. It?s hard to influence risks, therefore there are guidelines stating that significant risk must be included in the annual report. This paper is a case study; the purpose was to examine how four Swedish listed companies chose to disclose their internal and external risks. Risk is initially described in general sense and then it figures to what constitutes an economic risk.Through a case study of four Swedish listed companies? annual reports we have, through qualitative methods found how the companies chose to disclosure their risks.

In recent years there have been many corporate scandals from environmental and social aspects. Corporate irresponsible behavior has led to major public discussions on responsibility and these pressures made that many companies wanting to show that they are working for a sustainable development by voluntarily reporting economic, environmental and social and social issues in the financial statement. They hope this will create credibility for the companies. In the current situation, there are a number of guidelines that companies can use to report sustainability. One of these is the GRI guidelines which is an international framework that covers many accounting areas and allows companies to compare their sustainability reports with other companies.The purpose of this study is to determine if all state-owned companies follows the government?s requirement that these companies must form a sustainability report under the GRI guidelines, and the sustainability report must be audited and certified by an outside party.

This project details the process of converting and transferring a turn-based paper prototype to a digital real-time format. The projects goals were to see how well the original feeling could be transferred to real-time and how the transition itself went. The project have been completed with the help of the programmer Mikael Gullberg. The practical part of the project was executed between the dates of 25/4 ? 2/5.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

Abstract: This report covers primarily the work of documenting electromagnetic fields generated by one of the later parts in the electrical power distribution chain: The electrical substation, wherein 10 kV is transformed to 400 V for use by private consumers. Thus it is one of the most widespread and frequently occurring parts in the Swedish power grid and of particular interest, as electrical substations are found everywhere in populated areas, often in close vicinity to people and animals.The report deals with a number of formulated questions and/or hypothesis? stated at the onset of the work undertaken, theory that is relevant for the topics the report covers, the details of the field work undertaken and the following analysis of the readings, which in term provide answers for the questions stated in the beginning. It also covers what is the currently known short term and long term risks associated with electromagnetic fields in the power frequent spectrum and of varying intensity in the vicinity of humans.The analysis also provides recommendations and identifies several points to carefully consider when planning for new installations or replacements of some parts of existing installations.For enhanced reading comprehension there is, aside from sections with pictures and attached explanatory texts and templates, several graphs, one-line diagram and maps of the power grid among the appendixes to the rapport..

HMS Networks AB develops, produces and sells communication technology for industrial automation. The product handles communication between a variety of protocols. The product treated in this project is an Anybus X-gateway Modbus-TCP Master/Client and this module is currently configured from a web-based interface. In doing so, the flexibility for handling protocols is limited to what the company chooses to add to the interface. Therefore the company had a request that the flexibility should be extended using a script language.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

Long time-series of pressure measurements often have high quality because the early instrumentsare more or less the same as the modern ones. A time-series from Lund consisting of three dailymeasurements from 1780-1997 has been homogenised and is therefore suitable for analysingpossible influences of the enhanced greenhouse effect. According to a two-layer model of theatmosphere one finds a shift in the frequency of baroclinic instability due to an increasedtemperature gradient caused by the increasing CO2. Baroclinic instability over the Atlantic Oceanis the main cause for frontal zone production, causing cyclonic activity over the southern part ofScandinavia. Changes to the baroclinic instability would therefore be traceable in the time seriesfrom Lund.

Mobile application demands a lot of attending to the program code. There are lots of different development platforms that can be used for development. Not only for the specific operating system there are also lots of different cross-platforms that should minimize the amount of program code. This report is comparing the way of creating an android application in the cross platform Xamarin versus in the platform Eclipse using the Android plugin. It contains a part about the architecture of Android and its functions.