This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

Active work to increase the efficiency of energy use is taking place in Sweden and throughout all of Europe. Electricity is an important part in our society?s energy system which means that the electrical grid operators and associated therewith has a central role in this work. Monitoring and controlling the electrical grids are managed from the distribution system operator?s DC, dispatch center.The aim of this report is to examine how the operations in a typical DC on the Swedish electricity distribution network will look like in five to ten years.

This study investigates whether auditors affect the tendency to report correct taxes for small companies. Since November 2010 the smallest companies in Sweden are no longer obliged by law to have an appointed auditor to perform the former yearly audit. The auditor shall during the audit, amongst other tasks, investigate whether the audited companies follow Swedish law, and report them if they do not. The presence of the auditor might influence the actions of companies to act according to law, and reduce errors in the reporting. Errors regarding tax reporting will result in a revised tax decision if detected by The Swedish Tax Agency.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.

This report, written by Ma?ns Ridze?n and Jonas Stenberg, presents the thesis carried out the spring of 2012. The authors met the first time in 2008, when they started their studies at Uppsala University. Since then they have completed various projects, both within and without the university. This study is based on a theory that was first conceived when Jonas Stenberg did his internship in the summer of 2010.

The aim of this Master's thesis is to discuss and analyse co-operation between public and academic libraries. The political changes that were initiated during 2004 have come to alter the conditions for Swedish libraries. The Swedish library law was changed at the 1st of January 2005 and co-operation between libraries is now statuary even if there is no description of how the new mission is to be executed. At the same time an extensive report about the Royal Library and its role as the Swedish National Library was presented. This report also recommended an increased co-operation between different types of libraries.

This report describes honey, its origin, properties and effects on human health. Honey has been used for a long time in most civilizations and apiculture is an important activity sector in many parts of the world. The trend is an increase in honey production but a decrease in the number of beekeepers in Sweden. Honeybees live in a highly developed society with a strong hierarchy and a well organized distribution of the tasks. They visit a broad spectrum of plants and collect nectar to store it as honey.

The purpose of this study is to explore active after-school teacher?s perceptions of the concept of meaningful leisure time. The purpose of the study is also to investigate if the interpretations of meaningful leisure time affect the perception of their work roles and after-school teacher?s actual work in a leisure activity. The study also provides an insight into how afterschool teachers perceive their roles in general.

The construction industries are relatively conservative type of business that takes a longtime to adjust for new methods and embrace new ideas. It dose not matter if the newmethod seems to be an improved method as long as it is new and untried. Constructioncompanies are reluctant to change form a longtime working method to a relativelyunknown method.The purpose with our report is to perform an evaluation of BeWi construction method.Our goal are to present the generally opinion about BeWi from the contractors that hasbeen in contact/worked with the method. We also want to know from the contractor?spoint of view if BeWi and the method measure up to the standards that are presented byBeWi and if they believe that improvements need to be done.Our progress up to the final report has consisted of three parts[1]Field studies[2]Interviews[3]Literary studiesWe started out with field studies where we took notes and observed all the includedworking phases on the construction site when using the BeWi method.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

This report documents the development of a software system for automaticscheduling called Hazel. This system is comprised of a server where an automaticscheduler has been implemented, as well as a web and mobile applicationthat allows users to interact with the system. The scheduler hasbeen developed with the functional programming language Haskell and usesa SAT-solver.Manual scheduling has long been the bane of managers everywhere, asmatching the needs of the employer with those of the employee is often adifficult and time-consuming task. There already exists several automaticschedulers that attempt to solve this problem. The issue with said schedulersis that thay tend to be expensive, or developed to only fulfill the needsof a particular organisation.

This report represents a comparison between two different tools used to create an online store that was developed by two students at the Technical University in Jönköping. The web shop will be of great benefit to both customers and administrator in a food firm known as Mattias' Livs. The company wanted an online store that facilitates the sale section and gives a full control of their stocks. The aim of this thesis is to create an online store that offers customers the ability to shop online and help the staff to operate the company in a simpler and more efficient way, which reduces the need for human resources and thus leads to less costs for the company. The aim also includes a comparison between the two different tools used to create the online store.

?Boverket? the Design Regulations in Sweden, also called BKR has for a long timebeen the mandatory standard that has guided and regulated construction design. Butat the end of 2010 BKR was replaced with Eurocode. This report deals with thecomparison of these two standards when it comes to wood construction. Duringwinter 2009/2010 there were many roof collapses due to excessive loads on theroofs across Sweden.

AbstractTrendanalys av rapporterade störningar vid de svenskakärnkraftverkenAnalysis of trends in reported safety-related events atSwedish nuclear power plantsSafdar KargarThis degree project was conducted at the Swedish Radiation Safety Authority (SSM)as part of the bachelors program in Nuclear Engineering at Uppsala University duringthe spring of 2011.The Swedish Radiation Safety Authority (SSM) has developed a Windows baseddatabase called ?ASKEN? during later years. In this database more than 12 000 eventreports are stored sorted in three categories, category 1, 2 and 3. The databasecontains events from the start of Oskarshamn 1 in 1972 till present time.All nuclear power plants in Sweden are obliged to report any deficiency in theirbarriers and/or the defense in depth in obedience to SSMFS 2008:1.When a failure is detected or there is reasonable suspicion of a deficiency, the eventreport should be classified as a deficiency of category -1, 2 or 3 [1].The event reports are logged and archived in the register of SSM. The SSM task forceAnalys av Störningar på elproducerande Kärnkraftverk (the ASK-group), evaluates allincoming event reports and categorizes them according to established criteria.The aim of the project is to study and analyze the event reports in the database andidentity interesting observations and trends which should be investigated morethoroughly by deeper analysis to establish any positive or negative trends of reportedevents. .

This report is about a thesis that is performed in and for SYSteam Engineering AB in Motala. The thesis work is divided into three parts, study of the market, programming and electronics. The study part consists of examining and comparing different data acquisition systems for testing of different circuit boards, taking into account the modularity, real-time applications, mobility, environmental, interface hardware and software, to be able to define a general module-based data acquisition system in both hardware and software that enables for future developments.The programming part consists of getting started with Visual Studio, which integrates the Measurement Studio for C#. NET. Measurement Studio includes classes and user controls for testing and measuring and offers tools for acquisition, analysis and presentation of real world data.