This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

A study of southern pudu (Pudu puda) was performed at the zoo Nordens Ark in Bohuslän, Sweden during twelve days in Mars and April 2014. Observations were performed during twilight. Time budget and enclosure use was examined, when the animals had access to the whole enclosure of 1000 m2 or a smaller part of the enclosure of 200 m2. There was almost no difference in time budget between the two enclosure sizes. At both enclosure sizes the animals spent most of the time at a place that was hidden from outside the enclosure. The hidden place was situated in the house.

The purpose of this thesis is to analyze the regulatory power, efficiency and impact of export control on Swedish arms export from the 1980s onwards, linked to the delegation of authority of permit license to the Inspectorate of Strategic Products in 1997. An increase in the administrative sector, based on a collective decision making process and established criteria and guidelines, aimed to strengthen the control of arms export to non-democratic and problematic states. In short, the aim of the study is to investigate and analyze whether there was a decrease in the arms export to problematic states or not. On one hand, it is reasonable to assume that the introduction of the new regulation entailed a more strict arms export policy. However, previous research has showed that regulations are sometimes not effective since incentives to breach these may be present.The study begins by examining the Swedish case and situation in terms of arms manufacturing and export, as well as the delegation of authority and legislation applied to the field over time.

Mål - Att spara 1 GWh underhållsenergi på Karlshamsverket.Metod - Att lokalisera de största energisänkorna på kraftverket, göra mätningar eller uppskattningar på hur mycket energi dessa förbrukar, för att där efter ge förslag på tekniska åtgärder, med tillhörande ekonomiska beräkningar som ska reducera energiförbrukningen..

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Sandvik Wire needed a review of the administrative part of the order fulfillment process and especially the work around packing and the inventory of finished goods. Therefore we acquired the assignment to investigate the administrative part of the order fulfillment process in the company with the purpose to identify potential for improvement. This investigation was performed with focus on the terminal and packing functions. The purpose with the investigation was also to identify critical factors for an efficient order fulfillment process and investigate if information quality is such a factor.Data was collected through interviews and observations on Sandvik Wire. With the help of this data the information and material flows was mapped, the work within terminal and packing, and adjacent functions was investigated.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

Husaberg Scandinavia AB is a company producing and developing a range of motorcycles for both on- and off-road use. Husaberg provided the project group with a task of developing an entirely new way of operating the sequential transmission that can be found in today?s motorcycles. The target was to bring the product from idea to a functional prototype ready for further tests. Operation of the motorcycles transmission is today made by a foot pedal placed on the left hand side of the bike.

In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

In our modern society, time is important. Technology is used in countless ways to faster get us from one point to another. The purpose of this report is to inquire whether there is a way to implement an option for personnel at Swedish hospitals to claim priority on an elevator call, and to do this in an efficient way. An ordinary elevator system has been simulated with an implementation of textit{Nearest Car algorithm}, an algorithm which calculates the most suitable elevator car to serve a specific call considering the distance between the call floor and the car and the direction. Along with this algorithm, different ways to handle priority calls has been implemented to see how they affect the mean transport time for both passengers with priority and regular passengers in the elevator.

In the informational age of today, continuous learning is of greatest importance. The demand for this seems to be increasing, while at the same time people are under more pressure to carry out more tasks in shorter amounts of time. A way to solve the problem of finding time to learn could be to make use of the possibilities that Internet offers for learning at a distance. The purpose of this thesis is to, from a pedagogical perspective, contribute to the discussion concerning Internet based distance education for a target population consisting of professionals. We have found that some of the courses included in the two certification programs which we have investigated are suitable for Internet based distance education.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

Through the ages mankind has developed and tested a cascade of varying weapons ofwar, large and small, and has has striven to push these creations to the limits of theirtime. A grand example of this are the medieval siege engines that have changed shapeseveral times over the centuries. After all this time the eciency of these siege engineswill have reached their peek.

Context: Lip-to-Lift (L-t-L) is a bedside-method for measuring oral transit time at swallow. It was designed for a swallowing examination of persons on nursing homes where weight loss was noted in people with average L-t-L-time >5 seconds (Sandin, 2005). The measurement was validated and evaluated by Eriksson, Bremer Zerpe (2008).Objectives: The study objective was to examine L-t-L on a group of young adults without swallowing disorders and as to examine the inter- and intra-judgereliability of the measure.Questions:What is the L-t-L-time for young adults without swallowing disorders?Are there any gender differences regarding L-t-L-time?How high is the inter/intra-judge reliability of L-t-L?Method: Examination of L-t-L-time was carried out on 20 young adults, aged 19-27 years, without swallowing disorders after Sandin?s (2005) instructions. Measurements of 20 swallows per person were made.Results: The average L-t-L-time of young adults without deglutition-difficulties was 1.13 seconds (sd =.14).

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.