Uppsatsen handlar om cineliteracy; att öka sin kompetens att tillgodogöra sig rörliga bilder. Jag undersöker huruvida brittiska filminstitutets femstegsmetod är en fungerande modell för att stimulera elevernas lärandeprocess av komplex film. Som exempel använder jag mig av Jacques Tatis film Play Time..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Time Perspective is related to mental and physical health. This study examines the relationship between Time Perspective and perceived stress where Time Perspective was expected to predict the level of perceived stress. Past-negative, Future-negative, Future-positive and present-fatalistic were expected to be positively associated with perceived stress while Past-positive and present-hedonistic were expected to be negatively associated. Measures from the self-assessment forms S-ZTPI, PSQ-recent and CES-D from 445 participants (242 women, 203 men) between 60-90 years were used to examine the hypothesis of the study. Two hierarchical multiple regression analysis confirmed that Time Perspective is associated with perceived stress and in part 2 explains it's variance, one when adjusting for demographic data (.R = .37) and the 2 other when adjusting for demographic data and depressive symptoms (.R = .13).

During my practical training I have seen what after-school offers children. Large groups of children and little staff, often results in that the children had to play freely until they go home. Few activities are offered to the children and the staff is busy looking after the children and ensures that they are not fighting.The purpose of this study is to find out how children feel about their leisure activities and if they think they are being offered a meaningful leisure. The main research questions were:How do children experience their leisure-time?Do after-school offers children a meaningful leisure and is it the children's interests and needs that govern the activities and the environment?How do the number of children in the leisure group affect the leisure time?The methods to collect data in the study are observations and interviews.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

The residential and service sector in Sweden accounts for approximately 38% of the total energy usage and Sweden has an aim to reduce the total energy use by 20% by 2020 compared to 2008, which means residential sector will have to improve energy efficiency. As part of that a law was instituted by the Swedish parliament that all properties must have an Energy Performance Certificate (EPC) to thereby give the property owners a greater insight into energy use in their buildings and propose recommendations for energy-efficiency measures. On the EPC, a value on the building's energy performance in terms of energy use in kWh / m2 per year is declared, of which electricity is a share of it. Instructions on what to include in the amount facility electricity for running the facilities is regulated by the authority for building, Boverket while SVEBY has made an interpretation of the regulations in their report "Brukarindata bostäder" where they have a table on what should be included in the amount and what not to include.This report is a study of two similar apartment buildings, where one of the buildings recently underwent renovation, to see if the declared amount of energy for electricity, in the EPC, is consistent with the measured value, and whether there has been any reduction in facility electricity in the renovated building after the renovation.The result shows that the measured value of the building electricity was 2.6 kWh / m2 per year, 28,8 %, lower than the declared value in the building that have not undergone a renovation. Calculation of values from previous years (2011) by the same percentage of facility electricity as in the results of the measurements, 56.7%, it becomes clear that the declared value for facility electricity in the EPC of the renovated building do not correspond with reality and that there has been an increase in use of facility electricity after the renovation..

Increased resource efficiency in an energy system could result in large economic and environmental benefits. Tekniska verken i Linköping AB (Tekniska verken) is responsible for the district heating network in Linköping. Their vision is to create the world?s most resource efficient region. An important step towards this vision is more efficient usage of produced heat, something which could be achieved through integration of a seasonal heat storage in the energy system.

Swedish healthcare are in need of radical changes to meet the requirements from both the government and the patients to create organisational working methods that better support the patients through their healthcare processes. Digitalization of patient data has been going on for decades in order to increase participation and understanding among patients in their care processes. However, availability of information does not ensure understanding. Therefore, resources should be devoted to create conditions to enable participation. The purpose of this study is to explore how visualization of patient data in the patient?s journal can affect the consultation in the encounter between the doctor and the patient.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The study examined what NHL-teams should improve. This has been done by studying the significant statistics of NHL-seasons, and with linear regression identifying what NHL-teams should do to win many points and thereby get a good placement in the final table. The most interesting result of the study is that the statistics on faceoffs and shots on goal and power play efficiency most seasons where irrelevant for the outcome of a season..

The study examined what NHL-teams should improve. This has been done by studying the significant statistics of NHL-seasons, and with linear regression identifying what NHL-teams should do to win many points and thereby get a good placement in the final table. The most interesting result of the study is that the statistics on faceoffs and shots on goal and power play efficiency most seasons where irrelevant for the outcome of a season..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Previous research within the field of advertising creativity has been based on the point of view of professional advertisers, deciding the norms of creativity without wondering how consumers define creativity. Thus, the main purpose of our thesis has been to investigate which dimensions advertising creativity consists of and the driving forces behind them. All based on a consumers? point of view. The secondary purpose has been to show how creativity affects efficiency through purchase intentions and Word- of-Mouth.