Time Perspective is related to mental and physical health. This study examines the relationship between Time Perspective and perceived stress where Time Perspective was expected to predict the level of perceived stress. Past-negative, Future-negative, Future-positive and present-fatalistic were expected to be positively associated with perceived stress while Past-positive and present-hedonistic were expected to be negatively associated. Measures from the self-assessment forms S-ZTPI, PSQ-recent and CES-D from 445 participants (242 women, 203 men) between 60-90 years were used to examine the hypothesis of the study. Two hierarchical multiple regression analysis confirmed that Time Perspective is associated with perceived stress and in part 2 explains it's variance, one when adjusting for demographic data (.R = .37) and the 2 other when adjusting for demographic data and depressive symptoms (.R = .13).

The Swedish social insurance agency provides financial support for families and children, but also for people with work injury, illness and at old age. During 2012 they saw the amount of notifications of insurance increasing in Sweden, which is a development that cost our society a great deal of money. With the aim to pursue a sustainable development I have therefore devoted this project to wellness and stress management within preschool.The employees of preschool are often dealing with a lot of stress, due to the big groups of children that causes high noise and sound levels. The high noise and sound levels is a contributor to stress which additionally can damage the health and cause impaired hearing loss. About half of the people around their forties until the age of retirement have difficulties understanding speech in large groups.The purpose of this project has been to investigate the causes of negative stress for my target group, women between 30-60 years old who works in preschool.

Bakgrund: Psykisk ohälsa har under de senaste åren gått om rörelseorganens sjukdomar som främsta orsak till långtidssjukskrivningar i Sverige. Psykisk ohälsa innebär en försämrad livs­kvalitet för de drabbade och leder till stora samhällskostnader. Forskning krävs för effektivare sjukgymnastiska behandlingsmetoder vid psykisk ohälsa.Syfte: Studiens syfte var att undersöka förändringar avseende ångest, depression, stress och kropps­liga symtom hos patienter som deltagit i gruppbehandling i Basal KroppskännedomTM (BK) i kombination med Mindfulness (MF).Metod: Studien genomfördes med ?single group design?. Mätningar av grad av ångest, depression, stress och kroppsliga symtom utfördes före och efter gruppbehandlingen med formulären HAD, SCL-90 och SCI-93.Sammanlagt behandlades åtta grupper under perioden 2008 ? 2010.

During my practical training I have seen what after-school offers children. Large groups of children and little staff, often results in that the children had to play freely until they go home. Few activities are offered to the children and the staff is busy looking after the children and ensures that they are not fighting.The purpose of this study is to find out how children feel about their leisure activities and if they think they are being offered a meaningful leisure. The main research questions were:How do children experience their leisure-time?Do after-school offers children a meaningful leisure and is it the children's interests and needs that govern the activities and the environment?How do the number of children in the leisure group affect the leisure time?The methods to collect data in the study are observations and interviews.

In course of time the role of the individual being has become increasingly important in the fight against poverty. Through its microcredit programmes, the organization Grameen Bank offers ?aid to self-help? to poor women on the countryside in Bangladesh. The purpose of this essay is to investigate how participation in Grameen?s microcredit programmes can affect these women?s social situation and working situation.

The construction of buildings and paved surfaces changes the natural water balance.Precipitation generates surface runoff and storm water instead of infiltrating into the soil.Storm water has come to be considered as a major source of pollution in lakes and streams inthe vicinity of urban areas. Reduction of pollutants in storm water is a key action in order toprotect sensitive recipients and maintain high water quality. Storm water is traditionallytransported by storm sewers to the nearest recipient. In recent years the approach to stormwater management has changed; storm water should primarily be disposed of on site, throughlocal disposal of storm water, LOD. LOD is created by a combination of the function ofseveral smaller local facilities and the general sewer system.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Automatic rumination measuring can be applied as a health indicator in dairy farming but is also highly desirable for research purposes. This study aimed to validate the technical functionality of the product RuminActTM, which employ acoustics to monitor rumination duration. The time budget of high yielding cows was studied and possible differences in rumination time between 13 rations were interpreted. Further the study examined what affects daily rumination and rumination efficiency. The validation was performed with direct observations that were compared to the automatically recorded rumination durations.

Lundbergs Plåt AB is a small company situated in Jönköping. Their main task is to process different kinds of steel such as stainless steel. Lately, they have shown an interest in Lean production.On the basis of the situation mentioned above, we developed the purpose to find and decrease the non value-added wastes in the production at Lundbergs Plåt AB. Out of this, we also developed and answered two questions: Which wastes can be found with help from a value stream mapping (VSM)? In what way can these wastes be reduced and how can these reductions contribute to an improved production? VSM is the method used to find the non value-added wastes.

This paper aims to describe the geographical changes of Swedish international aid politics since 2007, which was the year the new aid reform of decreasing collaborating countries, came up. To decrease the number of aid receiving countries due to efficiency is not a new idea within Swedish aid politics, but Sweden received criticism from the (DAC) Development Assistance Committee, saying Sweden was active in too many countries, and the government established a policy to decrease the amount of countries given aid. Despite the government?s recent work, science has shown on a failed country focusing. This is followed up in the paper trough examination of statistics to measure the extent of the reduction.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Sparse matrices are often used in numerical algorithms that solve linear equation systems. Many methods for storing sparse matrices have been proposed and implemented during the years. These methods focus primarily on minimizing the total memory consumption and the time that it takes to store a sparse matrix. This report researches the available storage methods for sparse unstructured matrices. The formats that are researched and implemented are COO, CRS and ELL.

Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.