GPS (Global Positioning system) and GIS (Geographical information system) has been used for planning and inventory in the forest sector for more than ten years. The last years the development has come to equip harvesters and forwarders with GPS and GIS (GIT). The goal with this study was to reach a basis for decision, how Stora Enso Skog should continue its investment in GPS and GIS in harvesters and forwarders. To reach this basis for decision, possible advantages and benefits, disadvantages and problems in the harvesting process was evaluated. The study was made as an interview study with four harvesting managers and ten machine teams. To secure the quality of the results an interview questionnaire was made before the interviews were done. The results showed that GIT will make the harvesting managers work easier.

This essay serves to illustrate the main practical differences between the popular medium-level programming language C++ (C Plus Plus), and the newer high-level language C# (C Sharp). It will focus on the aspects that are readily apparent to the application programmer, such as differing syntax, constraints and capabilities.It will also feature a similar comparison between the open source OpenGL graphics library, and the proprietary Direct3D graphics library owned by Microsoft Corporation.It will not go into the differences in ?under the hood? mechanics that the application programmer seldom have to consider after having chosen his programming language or graphics API, such as C# being compiled into an intermediate language and is run on a virtual machine where C++ is compiled directly to machine code, or the differing principles of rendering in OpenGL and Direct3D.This is by no means comprehensive, many things have been left out or overlooked..

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Netadmin Systems är ett Linköpingsbaserat IT-företag där huvudprodukten NETadmin är ett Operation support system/Business support system (OSS/BSS) som i huvudsak används i öppna nät för bl.a. kund- och lagerhantering, provisionering, övervakning och ärendehantering. Ett växande behov finns att göra det möjligt att använda övervakningssystemet via mobila enheter för att kunna felsöka och hantera driftstörningar effektivt.Syftet med rapporten är att undersöka hur övervakningssystemet kan göras tillgängligt på Android samt att ta fram en prototypapplikation för hantering av grundläggande övervakning. Genom fallstudien som har genomförts har slutsatsen dragits att Netadmin API är lämpligt för kommunikation via mobila enheter men att API behöver vidareutvecklas med ytterligarefunktioner. De viktigaste av dessa har implementerats och arbetet har även mynnat ut i en applikationsprototyp för Android.Genom utvecklingen av denna applikation ges Netadmins kunder möjlighet att hantera övervakningssystemet via mobila enheter..

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.

 AbstractThis Master?s thesis analyses the dynamics of the medieval counterweight lever engine, ortrebuchet, a type of mechanical artillery. The purpose is to study the differences between different types of these machines, and see if computer simulations can be used to validate preserved advice on construction. Simulations include machines with a fixed counterweight, a hinged counterweight and a combination of both counterweights.Due to the almost complete lack of archaeological finds and insufficient historical source material there are still, after more than a century of research, many unanswered questions concerning the design and performance of these machines.The present study is based on an analysis by Jahsman (2004). A more detailed mathematical model employing Coulomb-friction is used.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.

The purpose of this thesis is to gain insight into educators? views and work with circle time in preschool. To find out, I have referred to the following questions: How is your circle time performed in preschool? What objectives have teachers with the circle time? What impact has your circle time for the children in preschool?I have chosen to carry out qualitative interviews with three preschool teachers. After the interviews, I compared the educators? response to previous research.The survey shows that the circle time is one of the day´s highlights for preschool children.

This master thesis in economics discusses the time use of today as well as the observed trends in time use over the last 20 years in Sweden. This is done by analysing time-use and consumption data at the microeconomic level, i.e. by explaining individual behaviour given the economic assumption of a rational behaviour. We reach the conclusion that the value of time is an important explanatory variable concerning the rationality in that time is used differently by different individuals and in the changed use of time. Furthermore, other variables such as social norms and the process benefit of a certain activity, i.e.

ThisreportisathesisfortheTechniciansinComputerAidedDesignprogramatHalmstadUniversity.Thegrouphasdevelopedamillingmachinemainlyusedforfiberboards,onbehalfofJohanWretborn..