As a leisure time pedagogue I find it hard to have an insight into what children are playing, and how they play when it comes to free play. My experience is that in some free play, conflicts arise, which reveal hierarchies and power structures containing violations, whereas other occasions of free play suddenly come to an end as the pedagogue interferes. In this essay I investigate my responsibility as a leisure time pedagogue during children´s free play, based on two differing play situations. I also investigate the play as a phenomenon by looking into previous research on children?s play and development psychology.

Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard.

Biofuels are getting more important as EU plans to replace fossil fuels with renewable energy sources. Because of that Sveaskog has chosen to invest in developing the handling process of logging residue. The company has a joined organisation for handling both round wood and logging residue. They are also working at integrating the forwarding of the logging residue with the rest of the harvesting team. Sveaskog is currently extracting 44 % of the available amount of logging residue.

Beacon AB has been producing Gobos for some time. A Gobo is a small round sheet used in projectors almost like a slide. It is used mostly in the commercial and entertainment business. Today these Gobos are created by using a film (also called mask). A digital exposure machine called LIOS has been developed to make it possible to create Gobos using direct exposure.

Introduction:A good work environment and good resources among district nurses? and general nurses? are important in the provision of good nursing care. For patient security it is also very important that resources and time are used in an appropriate way. A lot of time is spent on non-core activity, for example administration takes more and more time, which can result in feelings of stress.Aim:The aim was to describe how district nurses? and nurses? in primary care perceived their work environment, how their worktime content was distributed and if there was some connection between perceived work environment and the distribution of work time.Methods:A mapping of the content of the work was made in two parts.

People are usually directed towards each other in conversations, to make it easier to hear what is being said. Algorithms for voice and speech recognition works in a similar way, regarding the microphone direction towards the sound source. In this thesis in electronics has therefore a servo control with binaural sound localization been implemented on a microcontroller connected to two microphones.When people perceive sound, the brain can estimate the sound source direction by comparing the time taken by the sound reaching one ear to the other [1]. The difference in time is called the interaural time difference, and can be calculated using various techniques. An exploratory comparison between the techniques cross-correlation and cross-spectrum analysis was carried out before implementation.

Two different methods for measuring biogas production were used, gas meter and gasbags. The gas meters were electronic and counted each time a certain gasvolume passed through them. The gasbags collected the gas that hade passed through the gas meter until a manual measuring could be done. The two different methods gave the same result for a volume at three liters but for a volume around 0,2 liters they did not. Accuracy and precision for the gasbags was more exact than for the gas meters even if the method was difficult with a lot of different elements that could affect the result.

This report is the result of a questionnaire survey done in cooperation with the company Sydved and their contractors. The investigation concerned all their ordinary contractors. The main goal with the study was to find out the contractors opinion about the current cooperation conditions with Sydved, their opinion about the future and how to improve the cooperation. All contractors got a questionnaire to fill in and return within a given date. The percentage of answers was 48 % at the first stage and further 11 % answered after reminder. The result of the investigation indicated that the contractors in general have a positive attitude to Sydved and the way that the company acts.

During my practical training I have seen what after-school offers children. Large groups of children and little staff, often results in that the children had to play freely until they go home. Few activities are offered to the children and the staff is busy looking after the children and ensures that they are not fighting.The purpose of this study is to find out how children feel about their leisure activities and if they think they are being offered a meaningful leisure. The main research questions were:How do children experience their leisure-time?Do after-school offers children a meaningful leisure and is it the children's interests and needs that govern the activities and the environment?How do the number of children in the leisure group affect the leisure time?The methods to collect data in the study are observations and interviews.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

I examine how relationships between people and objects are created and continues through contiguity every time one use or touch an object and through participation through use and memories. The aim is to continue a relationship and to keep a communication alive with people beyond time and space, then, now and henceforth. I take advantage of and transform the traces in an object that belonged to someone. Parallel I create new space for bodies to put their mark for the first time. I compare my work with the Nordic Museum's task to preserve the present for the future.

Due to the requirement for reduced use of insecticides and the lack of competitive mechanical plant protection, you need a scarification with good result. This is often no problem to perform in normal terrain without technical barriers. However, in difficult terrain with large number of rocks and steep slopes, the result would be worse. The purpose of the study is, that in these areas with difficult terrain, to find out the scarified areas quality, describe the non-scarified areas conditions and find out where the limit is for the use of a traditional disc trencher. Findings indicate that there are usually not the machine that is the limit, but the driver of this.

Uppsatsen handlar om cineliteracy; att öka sin kompetens att tillgodogöra sig rörliga bilder. Jag undersöker huruvida brittiska filminstitutets femstegsmetod är en fungerande modell för att stimulera elevernas lärandeprocess av komplex film. Som exempel använder jag mig av Jacques Tatis film Play Time..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.