By using steady-state measurements for predicting emissions under a dynamic drive cycle wouldsave a lot of time and money for the exhaust aftertreatment specialists at Volvo cars. The idea forthis thesis has been to investigate if statistical regression models can be used with good accuracy.Questions included are for example if common operating variables such as engine speed, air-fuelratio etc. is sufficient to predict engine-out emissions over the engine operating range with goodaccuracy. Focus was set on the modelling of warm engine, but also the more complex engineheat-up phase was investigated since it is a great contributor to total emissions. While NOxcouldnot be measured because of malfunctioning measurement equipment, only HC, CO andtemperature at inlet of first catalytic converter has been modelled.

This thesis examines why working time preferences differ between workers and nations, and explains the effect of working time regulation and working time flexibility on negotiating work-life balance. In five separate sections the following working time issues are examined: the number of hours worked by workers in Europe; factors affecting individual working time preferences; how working time preferences are negotiated in the national industrial relations systems of Sweden, France and the United Kingdom; how the institutions of the European Union have influenced working time negotiations through the Working Time Directive; and the benefits and practices available to organisations implementing working time flexibility. Broadly this paper views working time preferences as being a highly personal and influenced by factors such as wages, taxation, culture (national and workplace) and non-work responsibilities. It is argued that negotiating a preferred working time pattern is essential to achieving work-life balance and when such a balance is achieved, workers are more healthy, motivated and committed to their employer. Essentially this provides an incentive for businesses to voluntarily implement working time flexibility beyond the regulatory standards..

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

The predominant forestry harvesting method is based on the harvester-forwarder method, theharvester folds, branches and cuts trees, and sorts the logs into piles, while a forwarder transportsthe logs to a landing area.This master thesis work is about realization of a dynamic forwarder simulation model, and itspurpose is to provide an integrated forwarder simulation model in MATLAB/SimMechanicswhere the forwarder is based on a concept using pendulum arms to connect wheels and chassis.Active suspension control is developed and implemented into the simulation model, and finallycompared in simulation with passive suspension.In a first step, an integrated forwarder simulation model is developed, containing a simplifiedforwarder model, a tire-to-ground interaction model and a test track model. The simplifiedforwarder model is based a rigid multi-body system with a spring-damper suspension of thependulum arms. The tire-to-ground interaction model calculates the reaction forces, friction fromthe ground and applies the propulsion force. The test track model is a simplified version of thereal test track in Skogforsk. The propulsion wheel torque control is used to regulate theforwarder speed.

Foreign invested SMEs have recently become increasingly interested in China. The enterprises are in this report categorized as second wave companies since they follow the footsteps of previous pioneers, of which mostly were larger companies. The ambitions of the SMEs are either to sell products on the ever expanding Chinese market or to utilize the potential of low cost production for global markets. The existing literature is fragmented and solely based on the experience of larger companies. We believe that SMEs are facing new and different challenges, and thus a new generic theoretical frame work is desirable.

Our study shows if and how Swedish public service television has changed its content from the time when SVT had monopoly until this day when the competition is greater than ever. We got an insight in what has been presented to the audience by studying TV schedules from 1975 to 2009. The study examines four weeks during the years when the two main channels SVT1 and SVT2 have been broadcasting. One week each of these following years have been examined: 1975, 1985, 1995 and 2009. These years have been chosen to get an insight in what content the TV schedules presented before and after SVT got competition in the Swedish TV market.

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

The main purpose of this thesis is to investigate how books are weeded in some Swedish public libraries today. It tries to shed light on some of the problems and obstacles that may arise, and on the criteria used by staff for weeding. I also hope to build a model for weeding, based on the results of my investigation. The method I have chosen for my work is qualitative interviews. The results of my thesis indicate that weeding is not the top priority of the staff at the investigated libraries.

Diagnosis means detection and isolation of faults. A model based diagnosis system is built on a mathematical model of the system. The difficulty when constructing the diagnosis system depends om how the model is formulated. In this report, a method is described that rewrites the model on such a form that the construction of the diagnosis algoritm is easy. The model is transformed by two state space transformations and the result will be a system on state space form where one part of the system becomes easy to supervise.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

For the actors in the Swedish forest industry, it is important to have the ability to forecast the state in the privateforests. The information that comes out of the forecasts will be the base for the activities strategic direction.The aim in this exam is to survey what information that is present today as basis for forecast calculation, andeven to examine what other possibilities it might have in the future.From a limited geography and out of different time perspective forecast the felling potential in the privateforestry.With the word felling potential means regeneration felling and thinning. The exam will answer the questions:What information is needed to build a relevant forecast model?Is this information available today?Is there information to buy that would improve the forecast model?The result of this exam will be presented in form of a ”case study” showing the opportunities in the market tocreate a forecast calculation of felling potential in the private forestry within the Forest Owners’ AssociationMellanskogs wood-area Dalarna..

The globalization that has occurred during the last few years has made it more important for companies to have a well-functioning logistics system. Customers demand more options, which lead to an increased flow that creates greater demand regarding packaging and transports. Diverse logistics costs are nowadays a substantial cost for many companies. Therefore, more effort is aimed at optimizing transportation to lower these costs.The purpose of this project is to create a user-friendly calculation of logistics costs that illustrates how the costs vary, depending on how the flow is structured. This is done by examining which aspects that affect the total logistics costs and by mapping which aspects that should be included in a calculation of the logistics costs.Literature studies have been carried out parallel with empirical studies at Scania's production unit, MC, in Oskarshamn.

This paper addresses the need to review the modern presentation of textile archaeology in museums. It is time to look at textiles in archaeology with new eyes. The reality behind archaeological textilestudy is holistic, embracing many different aspects of society. The presentation of textiles has in my opinion become old-fashioned. I will show in my paper that Jonathan Adams? `seven constraints´ model, developed for research on ancient ships, can also be applied to textile research.

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.