Sök:

Sökresultat:

1503 Uppsatser om Timber vehicle transport - Sida 32 av 101

Marknadsundersökning för SCA Skog AB avseende utbor i Mälardalen :

The need of raw material does of course fluctuate but the long term view is an increasing demand due to the growing consumption of sawn timber products, pulp, paper and lately also biomass. This has led to a keener competition for wood. At the same time there is an ongoing structural change of a significant part in the Swedish wood supply market, the private forest owners. In 1992, 22 % of Sweden´s 335 000 private forest owner lived apart from their forest. In 2007 this figure had risen to 36 %.

Föroreningstransport i grundvatten : En modelljämförelse

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for calibration and validation of stationary groundwater models is discussed. The time dependency between surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the surface water levels. Hence the use of such long-term means for calibration and validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

Vad vet gymnasieelever om betygskriterierna och kursplanen i Idrott och Hälsa?

The Scanian woodfences has been determined by two mainly elements: Scania's composition of tree species, with a large element of deciduous forest, and the local building tradition which has more in common with the European continent than the Swedish tradition. By examining responses from ethnological question lists deriving from the first half of the 1900s, combined with literature studies, I have been able to deepen and broaden the knowledge behind the various fencing design. In addition I ?ve constructed maps which could illustrate their historical geographic distribution.I have come to the conclusion that there was three main types of woodfences that was most common until the barbed wire was introduced in the early 1900s and later on replaced the elderly woodfences. Common for the three main types is that the base material was made out of Juniperus communis, this largely because of its durability against rot.

Är avståndet för transport av spannmål en kritisk faktor i framställningen av etanol till framtidens bränsle?

Förr eller senare minskar tillgången på råolja och därmed bensin och diesel i världen. Då måste vi människor finna andra drivmedel för att klara våra transportbehov och andra behov som är beroende av drivmedel. Förutom detta finns det behov av åtgärder som minskar emissioner av CO2 till atmosfären. Etanol som drivmedel är relativt nytt, och marknaden är potentiellt mycket stor. Agroetanol AB är en etanolfabrik i Norrköping som använder spannmål som råmaterial.

Stressad i knoppen, inaktiv i kroppen? : en tvärsnittsstudie om förändring i fysisk aktivitet vid stress i vardagen

Syfte och frågeställningarSyftet med studien är att undersöka om det finns några skillnader i fysisk aktivitet beroende på upplevd stress. Undersökningen avser att jämföra en tidsmässigt lugn respektive stressig vecka. För att besvara syftet undersöks om deltagarna når upp i rekommendationerna för fysisk aktivitet samt om det finns en skillnad i aktivitetsgrad mellan domänerna.  MetodStudien är en tvärsnittsstudie där enkäter används för att besvara syftet. Enkäten är egenkonstruerad och uppdelad i två delar, där delarna representerar en vanlig lugn vecka och en vanlig stressig vecka. Den upplevda stressen är utgångspunkt, den fysiska aktiviteten undersöks genom frågor som berör intensitet, duration och frekvens.

Framtagning av en förebyggande åtgärd mot kriminalitet vid lastbilstransporter

Boberg at Scania CV AB. The purpose was to investigate the technical and customer oriented possibilities for the development of a transport security measure against cargo crime, which is a growing problem in Europe. The main goal was to develop a concept that is possible to implement in the Scania CV AB Fleet Management System. Another goal was to develop a security model that will be used as a tool during Scania CV AB?s future development projects of transport security concepts.The work was divided into three main parts: a background study, handling cargo crime, transport security Scania CV AB trucks and market analysis, a stakeholder investigation including a questionnaire and interviews, and a concept development session.

Volymsrapportering vid drivningsarbete

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Externhandel och mellankommunalt/regionalt samarbete utifrån ett hållbarhetsperspektiv med fokus på delregionen Södertörn

In Sweden according to the planning and building Act municipalities have planning monopoly. The question about shopping centres in the outskirts of cities is a regional issue, because they attract customers from a large area. Municipalities often find it hard to assert themselves against large commercial companies when it comes to their establishing new retail outlets on the outskirts of cities. Without a regional co-operation there is a risk that municipalities can be played up against one another, so that more and more companies are given permits without the municipalities having taken the strategic consideration necessary for a long term sustainable development. The focus in this work is on four municipalities in the Södertörn region (Södertälje, Botkyrka, Huddinge and Nynäshamn).

Beaker-kulturernas ursprungs-ID

This essay aims to investigate the use of an origin-ID within the Beaker Complex, as defined by John C. Barrett, seen through their different expressions of use in ceramic form and ornamentation, architecture and landscape through time and space with special emphasis on the late Neolihtics in the South of England. The analytic vehicle "the reinforcing circle" is used as a new diffusion model suggested by Stuart Needham, and the analytic tool "incubation" is used to structure the process the Beaker-cultures may have used to reach cultural hegemony. Id est, that the Beaker-cultures socially invites already existing cultures, offering within family and trading the results of new technolo­gies. And/or, occupy the space and use the authority needed by re-writing the narrative as seen in the grave use and grave deposits.

Lägesbild : Problemområden vid skapandet

Within the framework of the concept of Network Based Defence (NBF) services should be available in the network, in order to increase the aggregate capacity. A common situation picture is one of these services.The aim of this paper is to answer the problem "What are the main problem areas in the creation of a situation picture in the land arena, with the help of the technical sensors that exist today?" and to develop a basis for continued research in the field situation in the concept Networking Enabled Command, Control and Collaboration (NEC3) at JCDEC (Joint Concept Development and Experimentation Centre). To answer the problem, a descriptive method is to be used in descriptions of the land arena, the information arena and the sensors and a deductive method is used when analyzing the asensors in the land arena.The problems that exist in the creation of a common situation picture, is that different types of obstacles makes it difficult for the sensors, the large number of people who are not combatants and that it is difficult to judge if a civilian vehicle is a threat, then it could be driven by civilians or by combatants..

Problemanalys i limlinje med Contipress

Projektets mål har varit att finna orsaker till delaminering av lamellimmade komponenter vid Stora Enso komponentfabrik i Ljusne. Detta resulterade i en analys av de faktorer, både material- och tillverkningsmässiga, som kunde bidra till en försämrad limfogskvalité. Analysen baserades på standard SS-EN 13307 ?Timber blanks and semi-finished profiles for non-structural uses?. En av de gällande faktorerna som analyserades var presstrycket vid limning.

Automatiskt avvägningssystem för obemannad undervattensfarkost

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.

Långsiktsplanering med geografiska hänsyn : en studie på Bräcke arbetsområde, SCA Forest and Timber

skogsföretagens långsiktigt strategiska planering sker idag i de flesta fall med Indelningspaketet (IPAK). För överföringen från strategisk till operativ och objektsorienterad planering finns ingen vedertagen rutin. Syftet med denna studie, som initierats och finansierats av SCA Forest and Timber, har varit att utveckla en rutin för långsiktig operativ planering. Kravet var att planeringsrutinen skulle vara kraftfull nog att implementeras på ett stort skogsinnehav, i detta fall ca 90'000 ha. Planeringsrutinen omfattar åtgärderna slutavverkning och gallring.

Kylkedjan för snittblommor - en kartläggning av distributionen

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

Implementation av FlexRay prototypstack

FlexRay is a new communication protocol which is fast, reliable and flexible and therefore can meet the increasing demands on data communication in the vehicle industry. The protocol is developed by an industrial consortium containing among  others BMW, Daimler Chrysler, Motorola and Phillips. Today (May 2009) Hägglunds is using CAN for data transmission in their systems. CAN is getting obsolete and has difficulties in coping with the increasing flow of communication. In this report FlexRay and its communication capacity is studied.

<- Föregående sida 32 Nästa sida ->