To be competitive in the corporate climate of today it is important to have effective logistic activities. A common resource within the internal logistics is forklift trucks, which are used to lift and transport material. It becomes more and more important to decide whether to buy, lease or rent the forklifts to obtain an optimal economic situation. Many companies have issues with internal pricing. It is difficult to price products and services correctly. It is common to price the overall instead of what it really costs.The purpose of the thesis is to present a model for the acquisition of forklifts for internal logistic operations, regarding financing and internal pricing, to obtain economic effectiveness and an optimal forklift fleet size. The study focused on a specific research question, and for this purpose interviews with experts were held, observations were made and a literature study was done.

Many watersheds have lost stocks of migrating fish species because of the development of hydroelectric plants and other fragmenting barriers. The remaining stocks of migrating Atlantic salmon (Salmo salar) and brown trout (Salmo trutta) in River Klarälven, Sweden are five times smaller compared to one hundred years ago. A fish-trap at the hydroelectric plant in Forshaga has been vital for the continued existence of the stocks. This is the first hydroelectric plant of eight, blocking the way to the spawning grounds. Spawners are collected in the trap for both hatchery and transport by truck upstream and past seven more hydroelectric plants to the spawning grounds, where they are released for possible natural reproduction.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

Previous studies of central tire inflation (CTI) in truck transport of roundwood have shown potential benefits to include more even wood flow and reduced road damage. The greatest benefits are found to be during periods of low bearing capacity such as spring thaw. No previous studies have examined geographical variations in the potential benefit of CTI-equipped trucks. The aim of the study was to develop and use a simple method for geographically prioritizing the use of CTI-equipped trucks within a forest company´s sector of activity.The host company for the study was Holmen Skog. The area studied consisted of Holmen Skog?s entire sector of activity extending from the province of Västerbotten to the province of Småland.

Detta examensarbete har gjorts på uppdrag av Rottne Industri AB och berör matarhjulens dubbinträngning i virket. Matarhjulen sitter monterade i skördaraggregatet i skördaren, en skogsmaskin som används vid skogsavverkning. Då inträngningen, som uppstår av dubbarna på matarhjulen, är för stor (>5mm) bildas skador på virket vilket är ett utbrett problem inom skogsmaskinindustrin. Studien kartlägger de vanligaste dubbmönstrens skadeåverkan under kontrollerade och vetenskapliga förhållanden där testerna är designade för att efterlikna verklig skogsavverkning.I studien utförs två tester. Det första visar sambandet mellan presskraft och inskjutningsmått för respektive dubbmönster.

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

The objectives of this research were to determine whether the natural rattan resources in Sulawesi, Indonesia can cope with the strongly increased harvesting pressure that has occurred over the last centuries. I was furthermore looking for patterns in the rattan population dynamics that might give a hint on how the harvesting system could be improved to ensure a maximum sustainable yield. To answer these questions, I developed an individual-based model to analyse the dynamics of rattan growth in connection with rattan harvests by locals to identify sustainable levels of rattan harvests around villages in Sulawesi, Indonesia. Scenarios with different harvesting intensities were run to compare the change in harvest amount. For a given harvesting pressure, scenarios with a high number of harvesters and a low harvesting frequency had the same effect as scenarios with high harvesting frequencies and a low number of harvesters.

There are two groups of haulage contractors in roundwood transport , those who are contracted direct by the transport buyer and those who are connected to a freight company which in its turn is contracted by the transport buyer. Today the roundwood haulage is dominated by contractors with one to two lorries. The effort of coordinating transportation for a transport buyer is dependent on how many communication contacts that must be managed (how many individual haulage contractors the transport buyer has to work with). A structural change in the sector that leads to a decrease in the number of haulage contractors but an increase in the capacity of each contractor, makes it possible for a transport buyer to coordinate transports with fewer communication contacts. The reason why a company reaches a certain size can be explained by the number of contracts it makes and manages.

Large amounts of birch-timber are imported to Sweden, from particularly the Baltic States, since the domestic production can?t support the pulp industry. The goal of this study was to show the potential of birch and the area?s most suitable for birch production. The study was limited to Gävleborg County. Using site characteristics, site index (SI) for birch was estimated on all National Forest Inventory plots in Gävleborg County.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

Trä är och har sedan länge varit en av Sveriges mest exporterade råvaror. Branschen sysselsätter idag omkring 100 000 människor i landet. I samband med de senaste årens miljödiskussioner bör husens uppbyggnad diskuteras. Syftet med detta examensarbete är att främja husbyggnation i massivträ som de senaste åren fått mer publicitet inte bara på den svenska marknaden men också i centraleuropeiska länder.Frågorna i detta arbete handlar om att identifiera de vanligast förekommande ytterväggskonstruktionerna och jämföra deras materialkostnader samt kostnader för arbete vid montering. För att ha kunnat göra en rättvis jämförelse har BBR?s energikrav varit den gemensamma nämnaren för ytterväggskonstruktionerna.Frågorna har besvarats genom intervjuer med tillverkare av prefabricerade massivträväggar, träregelväggar och betongväggar varpå energiberäkningar utförts i samband med framtagning av olika väggkonstruktioner för att få fram tre lika energieffektiva väggar.

Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.

Saab Aerosystems has a long tradition and a lot of competence in the field of flight simulation. Their ambition to broaden the market horizon has led to a discussion about also selling vehicle simulation solutions, both for military and civilian use.The aim of this thesis is to investigate the driver?s experiences of the accelerations he or she is exposed to whilst driving in rough terrain. The results may be used as a basis for future decisions and can act as a platform for the construction of an effective simulation model.To investigate the driver?s exposure of acceleration, some kind of dynamic simulation is needed.

Scania InfoMate develops web applications that support truck distributors and workshops with the necessary tools for an effective maintenance process. However, the end-users of these applications are faced with as many different graphical interfaces as there are applications. As a consequence, important effects of recognition are lost, developers spend unnecessary time designing new solutions for each application and Scania InfoMate does not present a homogeneous brand image towards its customers.Therefore the aim of this study is to give a suggestion of how a standardized graphical interface for web applications at Scania InfoMate should be designed. The given suggestion should come from thorough investigation of both end-user needs and recent research within the area of usability. In addition to a standardized interface this study also aims to deliver guidelines that support future web application development at Scania InfoMate.Through a combination of methods, mainly heuristic evaluation and user interviews, an elaborate description of usability and consistency problems in a defined web application portfolio is produced.

The Department of Forest Products and Management, Swedish University of Agricultural Sciences has received means from Vinnova for a preliminary study of the organisation of logging work of today and how a better logging organisation should be brought about. This thesis reports results from qualitative interviews with nine forest machine contractors regarding the situation of their companies. The interviews have been analysed with respect to the genesis of the companies, which tasks they perform or that they could consider perform-ing, business relationships of the companies, relationships between the different partners of the companies, and the state of competition experienced by the contractors. The companies have developed either from the contractor previously being machine operator employee or from that the contractor in making has owned a machine and needed work. Their primary business is mechanised logging.