The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

The forest in the county of Småland has been utilised for a long time. One of the most important forms of utilisation of wood has been charcoaling for the benefit of the iron industry. Shortage of forest in relation to the iron industry, was discussed already in the 17th century in Sweden. The aim of this study was to analyse the purchase and consumption of charcoal at Storebro Bruk, an ironwork in Småland, during the period 1793-1850, as well as analyse the shortage of forest at the time. To determine the utilisation of the forest in the area, I have used historical sources from Storebro Bruksarkiv.

This essay is about the question if there is any difference in quality at the homes for the elderly in Skåne, depending on however the home is run by a public organization or private counterpart. The quality of the homes is meet with the help of numbers in ?the guide for the elderly? the facts in the guide are collected and judged by the ?Swedish National Board of Health. The result from the guide is divided into seven areas of quality, and then compared in a statistic test between the different types of organizations. And finally the result of the statistics is put in the context of the theory of New Public Management.

This study is based on interviews with heads of unit, care staff and senior representatives from a total of six people. We have in this study directed our focus on care quality in the elderly as a concept in development. It appears, when the elderly do not have any dependents, it is even more important that staff supports some extra where no relatives are involved.Quality of life is the broader concept of good quality care and where a good quality of care is a necessary condition for a good quality of life. According to the social services care is the target that older people will live a good life and be allowed to live in a safe environment, which we intend to investigate in this study. Opportunity for greater influence should now be given to older people and their families on how interventions should be designed and implemented.

Open source software has recently been discussed, not least in media as a revolution in IT. A number of advantages have been listed in changing proprietary software into open source software. Examples of such pros are no expenses for license fees and improved efficiency. In spite of this, few users have made this change. One of the reasons is a distrust of the quality in open source software.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

 There is a lack of research in the field of quality improvement efforts based on profound knowledge in social services. The current situation is therefore a significant knowledge gap in terms of studies of this type of systematic quality work and how it is applied in practice. This study therefore intends to describe Pilbackens quality work and further examine if the profound knowledge is consistent with quality work in microsystems by an analysis of Pilbackens work. The present study has been performed by a qualitative method and the material is collected through semi-structured interviews. In order to analyze the study?s result have profound knowledge and the model microsystems been used.

Swedish school has for the last decades been using quality management as a method for improvement. Quality management is an enormous work and the whole school staff needs to be involved. The management consists of several parts like planning, surveys and interviews, analysis of the replies and setting up new goals. Parents, children and teachers are nowadays accustomed with quality surveys. The last few years these quality surveys have been computerized, but they still look almost the same, using little interaction with the respondent.I have had the opportunity to work with the company KMF Ventures, which has a vision that entails a more interactive web survey.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

The need for auditing originates from the agency problem that arises due to the separation of ownership and control in companies. The purpose of the audit is to increase credibility of the financial statements that management uses to communicate with owners and other stakeholders. In order for the audit to fulfill its purpose a certain level of quality needs to be obtained. The auditor can also be seen as a provider of a commercial service in which service quality is important. Audit quality can thus be separated into technical quality, which is defined as the probability that the auditor both discovers and reports a breach in the client?s accounting system, and service quality, which relates to the provision of services in general.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

What is customer satisfaction and when does it occur? Microsoft?s customers and partners state that product quality is the strongest driver for customer satisfaction. To be able to increase customer satisfaction Microsoft must know how their partners and customers define product quality. This study investigates product quality in general terms but also in the context of the product Microsoft Dynamics CRM in addition to experience from some of Microsoft?s customers and partners.

The purpose of the rebuild of Notnäs AB timber sorting line is to renew the existing drive and turning ends of the transport chain, which has become old. This means that Notnäs AB have problems to get new parts if the gearbox and chain are worn out. They also require that the rebuild should have a maintenance schedule for the new spare parts that will be used in the rebuild. Maintenance workers placed great emphasis on that in a rebuild it shall be a service-friendly design. The maintenance schedule used in Notnäs AB in the current situation is from Statoil and the report uses SKF formulas and recommendations in order to obtain a lubricating schedule.

This study investigated how banner ads, depending on its quality and placement,can capture a user's attention while searching for editorial content in an online newspaper. Furthermore, the user's search strategy was also studied to see whether it varied depending on the placement of an ad. An experiment was conducted where 20 subjects searched for articles in a Swedish online newspaper while their eye ovement was recorded with a headmounted eye?tracker. In each search task the online newspaper contained either a low quality ad or a high quality ad.

The goal of this work is to get as good a basis as possible to explain what the owners want for products and services when those doing business with buying groups in Korsnäs purchases regions: Gävleborg, Dalarna, Uppland and Frövi. It should also provide Korsnäs knowledge of the most important factors to consider in business with the owners. Another important aspect is to find out what you have done better at the business with owners, to eventually be able to preserve and take them into account. 300 questionnaires sent out to randomly selected owners in these regions. This is to find out what the owners did not have the products/services of Korsnäs. 29 questions were asked in the affected areas to identify what was missing and to eventually be able to satisfy them.